Thone NC1 Noise Canceling Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- Thone
Table of Contents
Thone NC1 Noise Canceling Wireless Bluetooth Earbuds
OVERVIEW
Pairing & Connection
Pairing mode
Take out both earphones from the charging bax (the earphone which comes out first from the charging box will be the master device). They will tum on and linked together automatically. The master device goes into pairing mode and blinks in red and blue colors
Connect with your device
Open the Bluetooth menu of your device and search for the earphones with the pairing name Thone NC1. Click the pairing name Thone NC1″ to connect with your device. It will confirm the connection with the voice prompts “connected. The leds on both earphones stop blinking.
Connection finished
When finished, you can put the earphones back in the box, they will then tum off automatically.
Reconnection
When you take out one or two earphones from the charging box and the Bluetooth of your device is turned on, it or they will reconnect automatically to the device it used the last time.
Charging
As soon as you put the earbuds into the charging case, they turm off automatically and start charging. Please use the provided charging cable to recharge. The case shows the battery life with four LED’s. Each stands for 25% of battery life. To check the battery status you can open the case or push the button at the bottom.
Control
You can control all basic functionality with touch control on the left en right earbud. Check the images for each function.
Problems?
The sound quality is not optimal Wearing the right tips size for your ears is very important. By doing so you achieve the best sound quality and noise- canceling performance.
Clear pairing records
Put back both earbuds into the charging case, open the cover and hold the button of charging case 10 seconds until the four charging case LED’s blink 10 times at same time. You cleared the pairing records successfully. Now open the cover and hold the button of the charging case 2 seconds. The left and right earbud LED’s blink in red and blue alternately to pair both earbuds. Then reconnect with your bluetooth device. If your earbuds don’t pair with each other Put back both earbuds to the charging case, open the COver and hold the button of the charging case for 2 seconds until both indicators blink in red and blue alternately, then the main device indicator blinks in red and blue alternately, then follow the “pairing and connection” steps again.
Contact
In case of complaints, contact us at: [email protected]
Safety and handling
Hearing loss
Listening to sound at high volumes may permanently damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than they actually are. Check the volume after inserting the earphones in your ear and before playing audio.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Driving hazard
Usage while operating a vehicle is not recommended and is illegal in some areas. Check and obey the applicable laws and regulations on the use of earphones while operating a vehicle. Be careful and attentive while driving. Stop listening to your audio device if you find it disruptive or distracting while operating any type of vehicle or performing any activity that requires your full attention.
Choking hazard
The earphones, the case, and small parts included within the packaging may present a choking hazard or cause another injury to small children. Keep them away from small children.
Skin irritation
Earphones can lead to ear infections if not properly cleaned. Clean the earphones regularly with a soft lint-free cloth. Don’t get moisture in any openings, or use aerosol sprays, solvents, or abrasives. If a skin problem develops, discontinue use. f the problem persists, consult a physician.
Prolonged heat exposure
Avoid prolonged skin contact with a device, its power adapter, the charging cable, and connector, or a wireless charger Wnen plug9ged into a power SOurce, because it may cause discomfort or injury. or example, while the case is charging using the charging cable and a power adapter plugged into a power source, don’t sit or sleep on the case, charging cable, connector or power adapter, or place them under a blanket, pillow, or your body. Take special care if you have a physical condition that affects your ability to detect heat against your body.
Charging
CHarge the case with the charging cable and a power adapter or o0mputer. Ony ciar9e with an adapter that is compliant with applicable COuntry regulations and international and regional safety standards, including the International Standard for Safety of Information Technology Equipment (EC 60950-1). Other adapters may not meet applicable safety standards, and charging with such adapters cOuld pose an NSK to death or injury. Using damaged cables or chargers, or charging when moisture IS present, Can cause ire, electric shock, injury, or damage to the case or other property.
Electrostatic shock
When using the earphones in areas where the air is very aiy, ts easy to OUia up steauc elecunCIy and it possible for your ears to receive a small electrostatic discharge from the earphones. lo minimize the risk of electrostatic discharge, avoid using the earphones in extremely dry environments, or touch a grounded unpainted metal object before inserting the earphones.
Batteries
Don’t attempt to replace earphones or case batteries yourself, you may damage the batteries, which could cause overheating and injury.
Medical device interference
The earphones and case contain components and radios that emit electromagnetic fields. The earphones and case also contain magnets. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and the earphones and case. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using the earphones and case if you suspect they are interfering with your pacemaker, defibrillator, or any other medical device
Handle with care
Handle the earphones and case with care. They Contain sensitive electronic components, including batteries, and can be damaged, impair functionality,. or cause injury if dropped, bumped, punctured, crushed, disassembled, or if exposed to excessive heat or liquid or to environments having high concentrations of industrial chemicals, including near evaporating liquified gasses Such as helium. Don’t use damaged products.
www.Thone.pro [email protected]