INVENTUM KV1808R Refrigerator Freezer Combi Instruction Manual

: June 5, 2024
: INVENTUM

Table of Contents

Safety instructions
- Refrigerant
Appliance description
Before the first use
Usage
Tips
Cleaning & maintenance
Troubleshooting
Reversing the door opening
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**INVENTUM KV1808R Refrigerator Freezer Combi Instruction Manual

**

Safety instructions

Please read these instructions before operating the appliance and retain for future use.
Only use this appliance for the purposes described in the instruction. The appliance is suitable for storing food. It is possible to freeze fresh food in the freezer section.
Only connect the appliance to alternate current, to an earthed wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
Do not use single/multiple adapters or extension cords.
Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the shop or our technical service. Never replace the plug or cord yourself.
The appliance must be moved and installed by two or more persons.
Be careful when moving the appliance to prevent the floor from getting damaged.
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
Check that the appliance is not placed too close to a heat source.
In order to ensure proper ventilation, a free space of 10 cm should be maintained around the appliance.
Never cover the ventilation openings.
Make sure the cooling pipes do not get damaged.
Install the appliance on a sturdy, flat and stable surface.
Install the appliance in a dry and well ventilated room. The appliance is intended for use in a room where the ambient temperature falls within the applicable class, depending on the climate class found on the information plate on the back of the appliance.

Climatic class

| Ambient temperature
---|---
SN|

From 10°C to 32°C

N

| From 16°C to 32°C
ST|

From 18°C to 38°C

T

|

From 18°C to 43°C

Do not store explosive or highly flammable substances in the appliance. The vapours could cause a fire hazard or an explosion.
Do not store glass bottles or jars with liquids in the freezer, as they could break when frozen.
Do not use mechanical, electrical or chemical agents to speed up the defrosting process.
Make sure that children are unable to play with the appliance, such as hide in it. This is dangerous.
Keep the appliance out of reach of children. Children do not see the dangers when handling electrical appliances. Therefore, never allow children to work with electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
Note: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
The appliance may not be cleaned or maintained by children, unless this is done under supervision.
Repairs to electrical appliances should only be performed by skilled persons. It is dangerous to perform a repair whereby the base unit of the appliance must be opened.
Only use and store the appliance indoors.
Never bend the power cord sharply or allow it to run across hot parts.
Always remove the plug from the socket when the appliance must be cleaned or repaired.
Never use the appliance with parts that are not recommended or supplied by the manufacturer.
Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the plug with wet or moist hands.
Be careful with ice cubes and ice pops. If these are consumed directly out of the freezer, there is a risk of frostbite.
Never submerge the appliance, cord or plug in water.
The appliance cannot be used with a timer or separate remote control.
This appliance is only suitable for household use. If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
If you decide not to use the appliance any more due to a defect, we recommend cutting off the cord after removing the plug from the wall socket. Household appliances are not normal waste. Take the appliance to the waste processing department concerned of your municipality.

Refrigerant

The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is flammable.

WARNING: Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

WARNING: Risk of fire/ flammable materials If the refrigerant circuit should be damaged:

Avoid open flames and sources of ignition.
Thoroughly ventilate the room in which the appliance is situated.

It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a shortcircuit, fire, and/or electric shock.

Appliance description

Interior lighting with thermostat
lass shelves
Crisp drawer
Freezer drawers
Adjustable feet
Door – freezer section
Bottle compartment
Door compartments
Door – cooler section
Egg tray
Icecube holder

Before the first use

Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove all packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of the reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport.

Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation. A minimum space of 10 cm is required between the appliance and the surrounding walls. In this way the appliance is able to release heat properly, cool well and function in an energy efficient way. You can use the adjustable feet to level the appliance. Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the appliance. When placed in a room that is too cold, the refrigerator will not function properly.

After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.

First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance to dry for 1 to 2 hours.

Usage

The control unit of the appliance is located on the inside. Check that the voltage corresponds with what is stated on the information plate and insert the plug in the socket.

SETTING THE TEMPERATURE OF THE COOLER SECTION

The thermostat of the cooler section is located on the inside of the refrigerator. Repeatedly press the temperature knob [1] to set the required temperature. There are six temperature positions.

2°C is the coldest position and the FAST COOL position ensures that the appliance cools down rapidly. If too much food is stored in the refrigerator at once, it is possible to switch on the FAST COOL function. The refrigerator makes the food as cool as possible for a period of 2.5 hours, after which the refrigerator switches back to the pre-set temperature. We recommend setting the appliance to the temperature position of 4°C when using the appliance in a room with room temperature.

The appliance will now cool continuously until the set temperature has been reached. Allow the appliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After that, you can set the thermostat knob to the required position and fill the appliance with food.

If the ambient temperature rises, set the appliance to a lower temperature position in order to be able to guarantee the interior temperature.
Usage

SETTING THE TEMPERATURE OF THE FREEZER SECTION

The thermostat of the freezer section is located on the inside of the refrigerator, behind the vegetable drawer.

There are three positions. The COOLER (winter) position is the coldest position. Turn the thermostat knob [2] to the required position.

We recommend setting the appliance to the NORMAL position when using the appliance in a room with room temperature.

If the ambient temperature rises, turn the thermostat knob between positions NORMAL and COOL (summer) to be able to guarantee the interior temperature.
Usage

Attention:

The ambient temperature, the frequency of opening the door and the position of the appliance have an effect on the temperature in the appliance. Take this into account when setting the thermostat.

Do not place hot food in the appliance.
You should never place hazardous, highly flammable or explosive substances such as alcohol, acetone or petrol in the appliance, because there will be a hazard of explosion.
Carefully package meat and fish to prevent unpleasant smells.
Leave sufficient space between the different foods, to allow the air to circulate properly.
Do not place food against the rear wall of the appliance. The shelves have a stopper to prevent this.
Do not leave the door open for longer than necessary.

Tips

High ambient temperatures have a negative effect on energy use. Keep the appliance in a position away from direct sunlight or other sources of heat.
Keep ventilation openings free. Clogged openings lead to higher use of energy.
Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible.
The space between the shelves and the rear wall of the refrigerator compartment must be unobstructed to allow the cool air to circulate. Therefore don’t place any food items against the back.
Turn the thermostat to a lower setting when the circumstances allow it.
Before storing fresh cooked food, make sure the food has cooled at least to room temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is 3 to 5 mm thick.
If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is substantially higher. To restore efficiency, replace the gasket.
Always consider the instructions, otherwise the energyconsumption is substantially higher.

To avoid contamination of food, please respect the following instructions

Opening the door for long periods can cause a significatn increase of the temperature in the compartments of the appliance.
Clean regularly surfaces that can come in contact with food and accessible drainage systems.
Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making icecream and making ice cubes.
One-, two- and three-start compartments are not suitable for the freezing of fresh food.

Order

| Compartments TYPE| Target storage temp. [°C]|

Appropriate food

---|---|---|---
1| Fridge| +2 ≤ +8| Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, drinks and other foods are not suitable for freezing.
2| (*)-Freezer| ≤-18| Seafood (ﬁsh, shrimp, shellﬁsh), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.
3| -Freezer| ≤-18| Seafood (ﬁsh, shrimp, shellﬁsh), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.
4| *-Freezer| ≤-12| Seafood (ﬁsh, shrimp, shellﬁsh), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.
5| -Freezer| ≤-6| Seafood (ﬁsh, shrimp, shellﬁsh), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.
6| 0-star| -6 ≤ 0| Fresh pork, beef, ﬁsh, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably no more than 3 days). Partially encapsulated processed foods (non-freezable foods).
7| Chill| -2 ≤ +3| Fresh/ frozen pork, beef, chicken, freshwater aquatic products, etc. (7 days below 0°C and above 0°C is recommended for consumption within that day, preferably no more than 2 days). Seafood (less than 0 for 15 days, it is not recommended to store above 0°C.
8| Fresh food| 0 ≤ +4| Fresh pork, beef, ﬁsh, chicken, cooked food, etc. (Recommended to eat within the same day, preferably no more than 3 days)
9| Wine| +5 ≤+20| Red wine, white wine, sparkling wine, etc.

Note: please store different foods according to the compartments or target storage temperature of your purchased products.

If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

WARNING – Food needs to be packed in bags before putting into the Refrigerator, and liquids need to be packed in bottles or capped containers to avoid the problem that the product design structure is not easy to clean.

Cleaning & maintenance

Before cleaning the appliance, switch it off by removing the plug from the socket.

Remove the food. Clean the interior of the appliance. Simply remove the shelves, drawers and door compartments to clean them by hand. Do not clean the interior accessories in the dishwasher. Use warm water and a neutral detergent, such as baking soda, to prevent any bad smells occurring. Use two tablespoons and a quart liter of warm water. After cleaning, rinse the interior with clean water and leave the door open to let it air dry for 1 to 2 hours before the power is turned on. Be careful not to affect the electrical insulation properties when rinsing with water.

For areas that are difficult to clean in the refrigerator, such as narrow gaps or corners, it is recommended to wipe them regularly with a soft rag, soft brush, etc. When necessary use some auxiliary tools, such as thin sticks (tooth picks), to ensure no contamination can accumulate in these areas.

Clean the outside of the refrigerator and the door gasket with mild soap and water. Use a soft moist cloth.

We recommend that you dust the back of the appliance and on the floor with a cloth or vacuum cleaner once a year in order to maintain a good output and low energy consumption.

Do not use hard brushes, cleaning steel wire balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone, oils, etc.), boiling water, acid or alkaline items to clean the refrigerator considering that this may damage the fridge surface and interior. Boiling water and benzene may deform or damage plastic parts.

DEFROSTING

The freezer section of this appliance is free from frost – no-frost. If used correctly, no ice will be formed.

If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove all products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets.

Remove the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section. Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section. Do not use sharp metal objects to scrape the freezer section clean, use a plastic ice scraper. Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting. Place the frozen products back in the freezer section once it has reached the required temperature. Warning Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar. This could lead to unsafe situations and cause irreparable damage to the appliance

REPLACING THE LED LAMP

This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the LED lamp in the appliance is broken, you are not able to replace it yourself. Contact the Inventum service department.

Troubleshooting

Breakdown

| Cause|

Solution

---|---|---
Appliance does not do anything; led does not light up| Plug not in socket| Insert the plug in the socket.
Temperature in the refrigerator is too high or too low| Incorrect thermostat setting|

Set the thermostat to the correct position
Check whether the MIN or MAX position has been set for the freezer section.

Ventilation openings are blocked| Clean the ventilation openings
Appliance makes noise| Is the appliance properly installed?| Check the installation
Does the rear of the refrigerator make contact with something?| Check this and move the refrigerator forward

Remark: bubbling and expansion noises in the cooling circuit are normal.

Reversing the door opening

The doors of the appliance can be opened on the right or left side. In order to reverse the door opening, observe the instructions below. It would be best to do this with two people.

Attention: remove the plug from the socket. Remove all items from the refrigerator, including the shelves, before reversing the door opening.

Remove the protective cover on the hinge – fig.1.
On the right top side, remove the hinge with the three bolts (do take note of the plastic adapter bushes between the hinge and the door) – fig.2. On the left top side of the appliance, remove the two bolts.
Carefully remove the upper door by moving it towards you and lifting it off the middle hinge. Place this door on a safe location – fig. 3.
Remove the middle hinge on the right side by loosening the two bolts and put it aside for the moment. Immediately move the white protective caps from the left to the right side and place them on the location where the middle hinge was removed – fig. 4.
Carefully remove the bottom door by moving it towards you and lifting it off the bottom hinge – fig. 5. Place this door on a safe location.
At the bottom side of the door, move the plastic block from the right side to the left side.
Then tilt the refrigerator backwards by maximum 45°.
On the left bottom side, remove the adjustable foot and the two bolts.
On the right bottom side, remove the hinge and the three bolts – fig. 6. Then place the hinge on the left bottom side with the bolts.
Place the adjustable foot on the right bottom side and re-insert the bolts there as well.
Place the bottom door against the appliance and make sure the bottom side is properly placed on the bottom hinge. Make sure the door is straight in relation to the exterior of the refrigerator.
Now mount the middle hinge and accompanying bolts on the left side – fig. 7. Make sure the hinge is placed in the top side of the bottom door. Use the adapter bushes and tighten the bolts. The bottom door has now been mounted.
Now place the upper door against the appliance and make sure the bottom side is properly placed on the middle hinge.
On the left top side, place the hinge with plastic adapter bushes and fasten it with the bolts – fig. 8. Make sure the door is straight in relation to the exterior of the refrigerator.
Carefully place the appliance upright again.
On the right top side, screw the bolts back in the appliance.
Place the protective cover back on the upper hinge.
Allow the appliance to rest for 2 to 3 hours before inserting the plug in the socket.