MIXX Revival 55 Stereo Vinyl Record Player Black User Guide

MIXX Revival 55 Stereo Vinyl Record Player Black

Product Information

Specifications:

• Turntable Platter
• Turntable Spindle
• 45 RPM Adapter
• Tonearm
• Speed Switch
• Tonearm Lever
• Pitch Control Knob
• Function Switch
• Function Indicator
• On/Off Volume Knob
• Headphone Jack
• Auto-Stop Switch
• Hold Down Clip
• RCA Jacks
• Aux In Jack
• Power Jack

Product Usage Instructions

Installation of UK Plug:

1. Rotate the UK plug.
2. Click it into place.
3. Remove when needed.
4. Rotate again if required.
5. Press to ensure it is secure.

Installation of EU Plug:

1. Rotate the EU plug.
2. Click it into place.
3. Remove when needed.
4. Rotate again if required.
5. Press to ensure it is secure.

Let’s Get Started:

1. Find a flat and level surface to place the unit on, free from vibrations.
2. Remove the tie-wrap securing the tonearm.
3. Connect the AC adapter to the Power Jack of the unit, but do not plug into the power outlet yet.

Let’s Play:

1. Turn on the power by rotating the On/Off Volume Knob.
2. Set the Function Switch to the PH position.
3. Set the Speed Switch to the appropriate speed for the record being played.
4. Place the record on the turntable and adjust the 45 RPM adapter if needed.
5. Remove the stylus protector from the stylus assembly.
6. Lift up the tonearm using the Tonearm Lever and position it over the record.
7. Gently lower the tonearm onto the record to start playback.
8. After playback, raise the tonearm and return it to the Tonearm Rest, securing it with the Hold Down Clip.

FAQ:

• What should I do if any accessories are missing from the box?
  If you find any accessories missing, please contact Mixx customer service for further assistance. Keep the original packaging for possible exchanges or returns.

• How do I ensure safe power connection?
  Make sure all connections are correctly set up before plugging the AC adapter into the power outlet. Always turn off the power when connecting or disconnecting components.

USER GUIDE

UK & EU POWER ADAPTER USER GUIDE

1. Turntable Platter
2. Turntable Spindle
3. 45 RPM Adapter
4. Tonearm
5. Speed Switch
6. Tonearm Lever
7. Pitch Control Knob
8. Function Switch
9. Function Indicator
10. On/Off Volume Knob
11. Headphone Jack
12. Auto-Stop Switch
13. Hold Down Clip
14. RCA Jacks
15. Aux In Jack
16. Power Jack

WHAT’S IN THE BOX?

Please take a moment to carefully check and ensure that all of the following items are in the box:

• If you find that any of these accessories are missing, please reach out to Mixx customer service for further assistance.
• Please hold on to the original packaging materials in case you need to exchange or return any items later on.

LET’S GET STARTED

• Find a flat and level surface to place the unit on. It’s important to choose a stable location that is free from vibrations.
• Remove the tie-wrap that secures the tonearm 4 .
• Connect the AC adaptor to the Power Jack 16  of the unit.

Note :

• It’s crucial not to plug the AC power adaptor into the power outlet until you’ve completed all the assembly steps. Before powering on, double-check that all the connections are set up correctly. Remember to always turn off the power when connecting or disconnecting any components.

LET’S PLAY

1. Rotate the On/Off Volume Knob 10 to turn on the power.

2. Set the Function Switch 8 to the PH position.
   Note: The Function Indicator 9 will be RED.

3. Set the Speed Switch 5 to the appropriate speed for the record you are playing. (e.g., 33 RPM, 45 RPM, or 78 RPM).

4. Place the record on the turntable. If the record is cut for a jukebox or has a larger center hole, rotate the built-in 45rpm adapter 3 clockwise to unlock and raise it. Push down and rotate anti-clockwise to lock it in place after use.

5.  Remove the stylus protector from the stylus assembly.
   Note : Make sure to keep the included stylus guard in place whenever the turntable is moved or cleaned to avoid damaging the stylus.

6. Release the tonearm Hold Down Clip  13 . This clip holds the tonearm 4 in place when the turntable is not in use. Remember to lock it back when the turntable is not in use.

7. Use the Tonearm Lever 6 to lift up the Tonearm 4 gently.

8.  Carefully move the tonearm  over the record to the desired starting position for playback.
   Set the Tonearm Lever 6 back to the down position, and the tonearm 4 will slowly descend onto the record and begin playback.

9. When the record is finished playing, use the Tonearm Lever 6 again to raise the tonearm 4 .
   Return the tonearm 4to the Tonearm Rest.
   Release the lever 6 to let the tonearm 4 sit back at its rest. If you want to suspend playback temporarily, repeat these steps.

10.  Lock the Tonearm Hold Down Clip 13 to secure the tonearm 4 in place for
    storage.

Note : If the Auto-Stop Switch 12 is set to the ON position, the platter will automatically stop after playback. This feature applies to most 33RPM vinyl records. On occasion, the turntable may stop before the end of the record. Set the Auto-Stop Switch 12 to OFF to overcome this.
You can also adjust the speed of your record by turning the Pitch Control Knob 7 clockwise to increase it or anti-clockwise to decrease it by approximately 10%.

LET’S CONNECT

• Connecting to a Stereo System:
  Connect the RCA Jacks 14 directly to active/powered speakers or an amplifier to output analogue line-level signals. Ensure the RED plug is in the RIGHT channel, and the WHITE plug is in the LEFT channel.
  Note: The RCA Jacks 14 are not intended for use with passive speakers; connecting them will result in significantly reduced volume.

Connecting via Aux:

• Input
  Connect to the Aux In Jack 15 using a 3.5mm auxiliary cable to play music through the turntable speakers from another audio device.

• Output
  Connect to the Headphone Jack 11 using a 3.5mm auxiliary cable to listen to the turntable with wired headphones.

• Note: The built-in speaker will stop playing once wired headphones are plugged in.

Connecting via Bluetooth:

Input

• You can play music from your smartphone or other audio device.
• Set the Function Switch 8 to R ; this will cause the Function Indicator 9 to flash BLUE.
• When your device is in pairing mode, the turntable will appear on your audio device as “Mixx Revival 55”.
• Once paired successfully, the Function Indicator14 will turn off.
• You can now play music from your device through the turntable; you can adjust the volume using the On/Off Volume Knob 10 .
• To disconnect your device, turn the Function Switch away fromR .
• Note: Position your audio device as close as possible to the turntable when pairing.

Output

• You can transmit the audio from your records to your Bluetooth headphones or speakers.
• Set the Function Switch 8 to T ; this will cause the Function Indicator 9 to flash BLUE.
• Once both your device and the turntable are in pairing mode, they will connect automatically and the Function Indicator 14 will turn off.
• To disconnect your device, turn the Function Switch away fromT .

MAINTENANCE

Routine Maintenance

• Avoid touching the stylus tip with your fingers and clean the stylus regularly with a soft brush using back-and-forth motions.
• Regularly clean the records with a record cleaning brush and record cleaning solution.
• Clean the turntable lid and turntable cabinet with a slightly damp microfibre cloth.
• IMPORTANT! Do NOT use a cleanser that contains alcohol, benzene or any other harsh chemicals that might damage the turntable.
• Replacing your Needles

1.  Push the tip of the stylus downward A .
2. Remove the stylus by pulling it forward B and pushing downward C .

Installing the Needle

1. Hold the tip of the stylus and insert the stylus by pushing downward D .
2. Push the stylus upward E until the stylus locks locks into the tip position F .

Storing your Turntable
Before storage, ensure that the tonearm is locked using the latch on the tonearm rest. Remember to store in a cool, dry location and keep all accessories with the turntable. Do not stack anything on top of the turntable.

LET’S BE SAFE

IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.

• Ensure the product is correctly connected using the manufacturer’s original accessories included with the product. Only use attachments recommended by the product manufacturer to avoid potential hazards.
• Do NOT make unauthorized alterations to this product.
• Take care to protect the power cord from being walked on or pinched, especially at the plugs, convenience receptacles, and where it exits from the product.
• Avoid overloading wall outlets, extension cords, or integral convenience receptacles, as this can create a fire hazard or risk of electric shock.
• During lightning storms or when the product remains unused for extended periods, it is advisable to unplug the product for safety reasons.
• Never insert any objects into the product through openings, as they may come into contact with dangerous voltage points or cause short-circuits that could result in fire or electric shock. Additionally, avoid spilling any liquids on the product.
• The cabinet features slots and openings for ventilation purposes to ensure reliable operation and prevent overheating of the product. Please avoid blocking or covering these openings.
• For your safety, refrain from attempting to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. It is advised to seek assistance from qualified service personnel for any servicing needs.
• Product may contain small parts which can be a choking hazard. Please keep the product out of reach from children under 6 and animals.
• If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it.
• The operating temperature range for this product is 5º – 40º celsius.
• Please avoid exposing the product to moisture, liquid spills or splashing.
• If you experience any of the issues listed above, please turn off your device and contact MIXX Ltd on support@mixx-io.com.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this product not authorized by Mixx could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.
This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

Responsible Party (contact for matters relating to FCC only):

ISED IC
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC US Agent LLC 3722 Illinois Avenue Saint Charles, IL 60174
USA.
FCC ID : 2AXJ7-REV55

Canadian Certification Consulting, Inc. 2210 Horizon Drive, Suite 17
West Kelowna
BC V1Z 3L4
CANADA
ISED IC: 31399-REV55

References

• MIXX Limited – mixx-io

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>