beko TBN 81808 BX Table Blender User Manual

beko TBN 81808 BX Table Blender

Please read this guide first!
Dear Customer,
Thank you for choosing a BEKO product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions.

Symbols and their meanings

These symbols are used throughout this guide:

Important safety and environmental instructions

This section contains safety instructions to prevent hazards that can result in injury or property damage.
Any warranty is void if these instructions are not followed.

General safety

• This appliance complies with international safety standards.
• The appliance may be used by persons with limited physical, perceptual or mental abilities or persons with a lack of experience and knowledge if they are supervised or given instructions on the operation of the appliance and any relevant risks they may be encountered. Children should not tamper with the device.
• Do not use the appliance if the power cord, the appliance or the appliance blade is damaged. Contact authorized service.
• Use only original parts or parts recommended by the manufacturer.
• Do not disassemble the appliance.
• Do not operate the appliance or its components over or near hot surfaces or do not put on such surfaces.
• Do not use the appliance for hot meals.
• For security reasons, the product would not operate in case you leave the lid open.
• Your main power supply shall be in align with the specified information on the type tag.
• Do not use the appliance with an extension cord.
• Do not touch the plug of the appliance while your hands are damp or wet.
• Do not unplug the appliance by pulling on the cord.
• Prior to cleaning, removal, and accessory mounting, unplug the appliance and wait for it to stop completely.
• Serious injury may result from misuse when emptying the container, during cleaning and when touching the chopping blade with bare hands. Handle the chopping blade carefully, trying to hold it only by its plastic
• Never touch the blades while using the appliance. There is a risk of injury due to improper usage.
• fter cleaning, prior to energizing or assembling the parts, dry the appliance and all of its parts.
• Do not immerse the appliance, the power cord or the plugin water or in any other liquids.
• If you keep the packaging materials, keep them out of the reach of children.
• Children must not use the device. Store the appliance and its electrical cord out of the reach of children.
•  Always use the appliance on a stable, flat, clean and dry surface.
•  This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments,
  • farmhouses, by clients in hotels, motels and other residential type environments,
  • bed and breakfast type environments
• Do not squeeze or bend the power cord and do not rub in on sharp edges in order to prevent any damage. Keep the cord away from hot surfaces and open flames.
• Before using the appliance for the first time, clean all parts carefully that come into contact with food. Please see full details in the “Cleaning ” section.
• Do not touch any moving parts of the appliance. Do not attach or remove the parts until the device comes to a complete stop.

Compliance with the WEEE Regulations and Waste Disposal

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used devices must be returned to an official collection point for the recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or the retailer where the product was purchased. Each household performs an important role in recovering and recycling of old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.

Packaging information

The product’s packaging is made of recyclable materials, in accordance with the National Legislation. Do not dispose of the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.

What to do for energy saving
Before adding solid food to the appliance, cut them into small pieces as indicated in the manual. Follow the other instructions and durations specified in the manual. If it is applicable for the food to be prepared, select lower speed levels. Turn off and unplug the appliance after use.

Your Blender

Overview

The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

1. Measuring cap
2. Lid
3. Glass container
4. Chopping blade
5. Silicone Ring
6. Motor unit
7. Speed adjustment button
8. Non-slip base
9. Cable wrap (under the appliance)

Technical data

• Voltage: 220-240 V~, 50-60 Hz
• Power: 800 W
• Insulation class: II
• The rights to make technical and design changes are reserved.

Operation

Intended use
The appliance is intended for home use only, it is not suitable for professional use.
The appliance is designed to chop small solid foods (e.g. onion, potato, carrot) and fruits (e.g. Strawberries, banana).

First operation
Clean the parts of the appliance before the first use (see 3.1.)

Start-Up

• Place the appliance on a fixed and level surface.
• To remove the glass container (3) from the motor unit (6), turn it to the “ ” symbol and take it out. Place the glass container (3) to a level surface and turn and lift the lid (2) clockwise to open.
• Place the ingredients you would like to prepare in the glass container (3) and close the lid (2).

WARNING:

• Do not operate the appliance empty or without a lid.

• Do not touch the blades with bare hands.

• For security reasons, the product would not operate in case you leave the lid open.

• In your fruit milk mixes (strawberry, banana, etc.), fill the milk up to a maximum of 1000 ml. Otherwise, overflows or leaks may occur during the process.

• Do not shred dried fruits such as almonds and hazelnuts with the device.

• You can process food at a maximum temperature of 40°C in the appliance.

• Do not insert any objects into the glass container (3) while the appliance is operating.

• Use the measuring cap (1) port to add material to the glass container during the mixing process.
  WARNING: Do not remove the material from the glass container (3) before the chopping blade (4) stops completely.

• Place the glass container (3) to motor unit (6) upright, turn it to the “ ” symbol to lock it in its place.

• Plug the appliance to the socket and start operating by selecting the speed level (7).

• When mixing is complete, turn the speed adjustment knob (7) to the “0” position and remove the plug from the socket.

Crushing ice

WARNINGS:

• Add water to the glass container (3) to break ice in the appliance.
• To process crushed ice, we recommend adding three-quarters of ice and 15 ml of cold drinking water to the container.
• After adding 15 ml of water into the glass container (3), add 3/4 ice.
• Plug the appliance to the socket and start operating by selecting the speed level (7).
• To add more ice during op-eration, open the measuring cap (1) and add ice cubes.
• When mixing is complete, turn the speed adjustment knob (7) to the “0” position and remove the plug from the socket.
• To remove the glass container (3) from the motor unit (6), turn it to the “ ” symbol and take it out. Place the con-tainer (3) to a level surface and turn and lift the lid (2) clockwise to open.

“P” position
The process of 1-2 seconds operation in the position “P” on the speed adjustment button (7) is called “PULSE”.
For high-speed mixing with short strokes, keep the speed adjustment knob (7) in the “P” position. When you release the button, the speed adjustment knob (7) automatically returns to the “OFF” position and the device starts to stop.

Tips for blending

1. To add ice cubes to the mixes while the blender is running, dispose of one ice cube at a time by removing the measuring cap (1). To make the blender mix the ice properly, wait for a few seconds before adding the next ice cube.
2. To add more food, remove the measuring cap (1) and insert the ingredients through the hole. Make sure the food is cut to a size of 2-5 cm to fit through the hole. Put back the cap (1) when you have finished adding ingredients.
3. While blending solid food like raw vegetables, cooked or raw meat, and fruits, always cut these materials into pieces of 2-5 cm in length before putting them in the glass container (3). Do not put more than 2 units of such food at once in the blender. This will speed up the blending process and reduce the abrasion on the blender blades (8).
4. Unless otherwise described in the recipe, always add the liquid ingredient in the glass container (3) first.
5. To blend a drink, put all ingredients in the glass container (3) at once.
6. Avoid over-blending. It is usually enough to blend for a few seconds.
7. Over-blending turns food into mush.

Cleaning and maintenance

Cleaning

WARNINGS:

• Never use gasoline, solvents, abrasive cleaners, metal objects, or hard brushes to clean the appliance.

• Be careful when cleaning the chopping blades unit. The chopping blade (9) is sharp. Try not to hold it from the blade side and do not immerse it in water.

• Never clean the blades with bare hands.

• Clean the table blender after each use. Do not let any residual food dry on or in the blender. It will be harder to clean it if you do so.

• Do not use boiling water. The bearings of the blade assembly have a life-long lasting lubrication feature. Using boiling water damages these bearings and shortens the lifetime of the blender.

• Turn the appliance off and unplug it. Wait for the appli-ance to cool down.

• Remove the glass container (3) from the motor unit (6). Rinse with water to clean up large food residues that can pile up in the container.

• Place the glass container (3) in its place. Add warm water and 1 to 1 ½ unit of liquid detergent and operate the blender in high speed for a few seconds.
  You can wash the glass container (3) and lids in the dishwasher.

• Unplug the appliance. Remove the glass container (3) from the motor unit (6) and rinse it with water. If necessary, repeat the same steps.

• Use a soft and damp cloth and a mild amount of cleaning agent to clean the motor unit (6).

Storage

• If you do not intend to use the appliance for a long time, store it carefully.
• Unplug the appliance before storing.
• Store the appliance in a cool dry place.
• Store the appliance and its cord out of the reach of children.

Transport and shipping

• During transport and shipping, carry the appliance with its original packaging. The packaging of the appliance will protect the appliance against physical damage.
• Do not put heavy objects on the appliance or its packaging. Otherwise, the appliance may be damaged.
• If the appliance is dropped, the appliance may not operate or permanent damage may occur.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>