JOYO R-07 AQUARIUS DELAY & Looper User Manual
- June 5, 2024
- JOYO
Table of Contents
Thank you for purchasing R-07 multi-mode digital delay pedal. In order to use it properly and safely, please read this owner s manual carefully before operating it.
Parameters:
- A looper pedal features various analog and DELAY functions.
- With 8 digital DELAY effects.
- With both DELAY and LOOPER functions.
- With Tap TEMPO control.
- You can use DELAY and LOOPER functions simultaneously.
- 300 seconds recording time.
- BYPASS switch, which simulates the circuit’s dry signal.
- DELAY effect can select whether keep the effect sound or not after being bypassed(In bypass mode, press the LOOPER button, then the indicator light flashes quickly twice, in red means there is effect sound once being bypassed, in blue means, there is no effect sound once being bypassed.)
Panel:
-
LEVEL/VOL knob LEVEL: adjust the volume of the DELAY effect’s feedback.
VOL: When the LOOPER function is turned on, you can adjust the volume of the playback for the soundtrack. -
TIME/TONE knob TIME: adjust the time for the DELAY effect’s feedback. TONE: When the LOOPER function is turned on, you can adjust the brightness of the playback for the soundtrack.
-
FEEDBACK/TAPE knob FEEDBACK: Adjust the depth of the DELAY effect. TAPE: When the LOOPER function is turned on, you can adjust the depth of the playback of the soundtrack.
-
8 types of digital modulation effects selection knob Different digital modulation tones can be chosen and you can also select the recording mode.
-
LOOPER button In DELAY mode, you can switch on or switch off the LOOPER. The LED light in the center of the button shows the working status of the LOOPER function. When the effects pedal is off, you can turn on or turn off the playback soundtrack by pressing this button.
-
LED The effects pedal’s indicator lights to correspond to different modes. Blue light—DELAY mode. Purple light—LOOPER mode. Purple light (flickering)—Both DELAY mode and LOOPER mode are on.
-
OUTPUT 1/4″ single-channel output jack, please use the standard instrument connecting cable to connect this output jack to your amp.
-
INPUT 1/4″ single-channel input jack, please use the standard instrument connecting cable to connect your instrument to this jack.
-
FOOTSWITCH 3 ways to operate the footswitch. Turn on/off(In Delay Mode) Tap the footswitch to turn on or turn off the effects pedal.
TAP TEMPO (In Delay Mode)
1)Press the footswitch for 2 seconds to activate the TAP TEMPO function (the indicator light is in red now).
(2)You can set the speed of the delay effect as you want by the footswitch, that is to say, tap the footswitch twice, and the time it takes equals to the speed of the DELAY effect.
(3)4 seconds after you finished setting, you can exit TAP TEMPO function mode automatically. LOOPER As for the LOOPER function’s operation for the footswitch, please refer to the related sections of the LOOPER function. -
Power input Please connect DC 9V 100mA center minus power to this input.
-
Front ambiance LED light
-
Rear ambiance LED light
-
Feet
-
Toggle SYNC: the ambiance light becomes blue when the footswitch is turned on. The ambiance light is off when the footswitch is off.
-
Toggle ALWAYS: the ambiance light is blue, and the flickering speed is the same as what TAP TEMPO is set to.
-
Toggle OFF: the ambiance light is off.
How to use the LOOPER?
LOOPER MODE
Adjust the mode selection knob to the position of “LOOPER”, then the LOOPER
mode is on, the LED light is in purple, and now the AQUARIUS is serving as an
independent LOOPER effect pedal, you can tap the footswitch to record the
soundtrack. In LOOPER mode, you can adjust the recording’s playback signal by
controlling the DELAY effect’s knob.
- LEVEL (Vol) : This knob can adjust the volume of the playback’s soundtrack.
- TIME (Tone) : This knob can adjust the brightness of the playback’s soundtrack.
- FEEDBACK (Tape) : This knob can adjust the signal intensity of the playback’s soundtrack.
The LED light is in purple
DELAY+ LOOPER
As for any DELAY mode, you can enter into the LOOPER function and begin loops. When the DELAY function and LOOPER function are used simultaneously, you can adjust the DELAY effect by adjusting the knob for controlling the DELAY effect.
- Use the mode selection knob to choose the DELAY effect as you need.
- Use the LEVEL knob, TIME knob, and FEEDBACK knob to adjust the DELAY effects. The LED light is ° s Linp7rpEIR purple and the flickering feels blue
- Press the LOOPER button and enter into the LOOPER function.
How to use the footswitch for LOOPER function
There are 4 ways to operate the LOOPER function: RECORD, PLAYBACK, DUB, STOP and DELETE.
RECORD
When you use the LOOPER function to create a loop for the first time, please
tap the footswitch and use your instrument to record.| The LED light is in
purple The LOOPER light is in red
---|---
PLAYBACK
When it finished recording the first soundtrack, tap the footswitch to stop
recording, and it starts to playback the recorded soundtrack.| The LED light
is in purple The LOOPER light is in blue
DUB
If you need to dub another one, then please tap the footswitch, it will stop
playback and dub the second soundtrack.| The LED light is in purple The
LOOPER light is in red
STOP
Tap the footswitch twice and it stops the playback of the soundtrack.| The
LED light is in purple The LOOPER light is in blue and keeps flickering
DELETE
Tap the footswitch twice and hold, and thus you can delete all the
recordings.| The LED light is in purple The LOOPER light is in blue
Specifications Dimensions:
1096748mm Weight:248g
Input Impedance: 2 2MO.
Output Impedance: 1000
Rated current consumption: 150mA
Working Voltage: DC 9V (center minus)
JOY° TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Baoan, Shenzhen, 518133
China.
Email: info@joyoaudio.com
Tel: 0086-755-29765381
www.joyoaudio.com
MADE IN CHINA
Documents / Resources
| JOYO
R-07 AQUARIUS DELAY &
Looper
[pdf] User Manual
R-07, AQUARIUS DELAY Looper
---|---