oclean S1 Smart UVC Toothbrush Sanitizer User Manual
- June 5, 2024
- oclean
Table of Contents
Oclean Smart UVC Toothbrush Sanitizer
User Manual
Device Cleaning
Do not wash the machine with runnin water in case of causing circuit
failure. It’ s recommended to use a wet cloth to clean it.
Mounting Wall Sticker
Locate an appropriate height on the wall, remember to leave enough space to
hang toothbrushes.
Make sure the sticking area is dry and clean (Suitable for smooth surface like
ceramics, glass, etc.). Keep an eye out for the correct up/down directions.
Stick the sticker onto the wall, apply a bit pressure to make sure it’ s
stably attached.
Tear off the sticker Stick to the wall Install the sterilizer
Power On/Off
After mounting the device on the sticker, pull the string once to start
sterilizing, the device will automatically stopped after fifinished
sterilizing. Auto-sterilizing runs every other 6 hours. When the device is
removed from the wall sticker, the device will be power o- automatically.
String Switch
By pulling the string switch during sterilizing process, it will automatically
stop working; By pulling the switch during non-working status, it will trigger
the sterilizing
process; Auto-sterilizing runs every other 6 hours after the fifirst
sterilizing process is finished.
Smart Sterilizing Timer
In standby mode, auto-sterilizing runs every other 6 hours, then continues to
stand by.
More Information
This device is mainly designed for Oclean and other major brands of electric
toothbrush. It is not guaranteed to be compatible with all toothbrushes on the
market.
Product Parameters
Product Name | Smart UVC Toothbrush Sanitizer |
---|---|
Model | Oclean S1 |
Working Temperature | -20°C ~ 60°C |
Charging Interface | USB-A to USB Type-C |
Charging Specifications | 5V ****0.6A |
Battery Capacity | 1000mAh |
Input Power | 3W |
Working Hours | Automatic disinfection every 6 hours |
Installation Mode | Wall mounted |
Charging Time | 2.5 Hour |
Executive Standards | GB 4706.1-2005 GB 470 6.59-2008 |
Follow the Oclean Official Facebook Page
Oclean Facebook Page
www.facebook.com/ocleanglobal
| | | |
---|---|---|---|---
| | | |
Name of parts| Toxic and harmful substance or element| Environment Protection
---|---|---
Pb| Hg| Cd| Cr6+| PBB| PBDE
PCBA| | | | | | | 10 years
Plastic parts| | | | | |
Metal hardware| | | | | |
Power cord| | | | | | | 10 years
Accessories| | | | | | | 5 years
Remarks
This indicates that the content of toxic and hazardous substances in all
homogeneous materials of this component is less than the limited quantity as
specified in GB/T 26572-2011.
This indicates that the content of toxic and hazardous substances in at least
one of the homogeneous materials of this component is more than the limited
quantity as specified in GB/T 26572-2011.
Except for very few materials, due to technical development reasons, most of
the materials used are environmentally friendly. Please use this product with
confidence during the environmental protection period.
Product model: | Serial Number: |
---|---|
User Information | Name: |
Tel:
Email:
Address:
Date of purchase:
Invoice number:
Problem Description:
Warranty Card
- These clauses only apply to Oclean products sold in the country or region where the purchase is made, if there is any inconsistency or omission with the national policy, the national policy shall prevail.
- For performance issues caused by the product itself, one may avail service as per below regulations with valid proof of purchase: 2.1 A customer can avail warranty service for free within 24 months from the date of purchase if there is a performance failure caused by the product itself.
- In order to avail replacement and warranty services, one should show the valid proof of purchase.
- Other product related materials (such as Packaging box, Product Manual etc.) are not covered in warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>