TELESIN T10 Smart Wireless Remote Control User Guide
- June 8, 2024
- TELESIN
Table of Contents
TELESIN T10 Smart Wireless Remote Control User Guide
Wearing The Remote
The Basics
LCD Display
| Remote Control Battery| | Time Lapse
---|---|---|---
| Camera Battery| | Video
| Bluetooth| | Photo
| Recording Time/ Number of Videos/Photos
Button
Shutter/Select Button
1 Short Press: Shoot photo, turn on/off recording.
3S Long Press: Enter phone pairing mode, only photo function in phone
mode, Bluetooth name is “T-10”
Star Button
When in the three main modes “Video”, “Photo”, “Time-lapse”
3S Long Press: Set the current main mode to “Quick mode”
15 Short Press: Enter the main mode corresponding to the “Quick mode
Mode Button [Power/Mode Switching] 2S Long Press: Power On
3S Long Press: Power Off
15 Short Press: Mode Switching
(After pairing, you can control the camera on and off)
Setting Button [Pairing, small mode switching]
1 Short Press: The camera switches between the normal sub-modes of the
main mode.
(The sub-modes of different camera models are different and cannot be
standardized)
Pairing
Setting Button 3S Long Press: The remote control enters pairing mode, and
the Bluetooth indicator flashes.
Camera Settings: Select Connections > Connected Devices> Remote Control. Put
the camera into pairing mode. Wait for a successful pairing message to appear
on the camera screen.
If the pairing fails, select Reset Connection in the camera settings and repeat the process.
If the camera has already been paired, you don’t need to pair it again when you connect the remote control next time, just make sure the wireless connection of the camera has been turned on, and it will be connected automatically after a few moments. When the camera is not used for a long time, the wireless connection may be turned off completely, so please unplug the camera battery and plug it back in to activate the wireless connection.
Pair up to 5
-
Cameras mode
In the state of the first camera connected, long press the [pairing button 3 seconds remote control Bluetooth [indicator] flashing, you can connect the second camera and so on, the maximum number of connected 5 -
Status Display
The display status of the first camera connected. -
Power On/Off
- All the connected cameras can be controlled at the same time to [shutdown]
- Only the first connected camera can remain connected in the shutdown state
- The first connected camera can be controlled to [Power on]
- Connecting the next four cameras requires the previous steps to be performed again
Charging
Plug the charging cable into the charging slot. Connect the other end of the cable to a computer or other USB power source.
Charging Time: 2.5h Usage Time: 10h
Warning: Please keep the charging device away from metal objects to prevent fire caused by short circuit.
- When charging, the screen lights up and the power indicator starts to work
Electricity Level
| Remaining Power | CAM Display | RC Display |
|---|---|---|
| 0-5 | Side Blinking | Side Always On |
| 5-24 | Side Always On | |
| 25-49 | 1/3 Power | 1/3 Power |
| 50-74 | 2/3 Power | 2/3 Power |
| 75-100 | Full Power | Full Power |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>