grado Fabric-Upholstered Furniture Instruction Manual
- June 5, 2024
- GRADO
Table of Contents
PRODUCT
MAINTENANCE
MANUAL
SOLID WOOD FURNITURE
Chromatic aberration
All products are taken in kind. Due to factors such as light and display,
there may be slight differences between the actual object and the picture. The
trees grow naturally. The influence of environment may also cause uneven wood
color, which may be unavoidable. If you mind, please be careful to order.
Cracked
Because the wood used is all-natural solid wood, the wood contains more or
less water. Due to the principle of swelling and shrinking, the spliced solid
wood will crack. It cannot be avoided; but we upgraded the splicing
technology- while greatly reducing the cracking situation, it still retains
the characteristics of pure solid wood furniture; of course, the cost and
material cost are also relatively increased, thus the price will be higher
than before.
Woodgrain scars
Because what we used are all-natural solid wood, the scarring of trees is
inevitable during the growth process, and the wood grain is the same. There
are no two trees that are exactly the same in the world, which will also cause
different textures. All we used are pure solid wood, so this aspect cannot be
avoided for the time being, please also be aware.
Solid wood furniture is made of natural wood, which has natural
attributes. Although the material selection process is strictly, the natural
attributes in the above picture cannot be avoided. This is not a quality
problem.
Care and maintenance
Cleaning and maintenance of furniture surface
At intervals, use cotton silk with 90% dry to wipe the dust off the furniture,
and then use a clean dry soft cotton cloth to dry it. Avoid using alcohol,
gasoline, detergent or other chemical solvents to remove stains. If there are
stains on the surface of the furniture, use warm tea or milk to gently remove
the stains. Do not use brute force.
Avoid scratches by hard objects
In daily life, try to avoid hard objects such as cleaning tools and tableware
from touching the furniture to avoid knocking injuries.
Avoid humid environment
In summer, if there is an indoor tide, it is advisable to use thin glue to
separate the parts of the furniture in contact with the ground, and at the
same time, keep the furniture against the wall with a distance of 0.5-1 cm.
Keep away from heat
In winter, place the furniture at a distance of about 1M from the heating
stream. Long-term high-temperature barbecue is easy to cause local dry
cracking and deformation of wood, also will cause local deterioration of paint
fi lm.
Avoid direct sunlight
Should try to avoid the outdoor sunlight for a long time on the furniture,
when the sun is strong, transparent gauze curtains can be used to isolate the
direct sunlight, which will not affect the indoor lighting also have a protect
for the indoor furniture.
Avoid dragging furniture
When moving the furniture, lift the furniture and then move it. Do not drag it
directly on the ground to prevent the structural parts of the furniture from
cracking.
LEATHER-UPHOLSTERED FURNITURE
Chromatic aberration
All products are taken in kind. Due to factors such as light and display,
there may be slight differences between the actual product and the picture,
and the length of use of leather products will also affect the color. Leather
products will also cause color differences due to the transportation
conditions of the place of production. The above are normal phenomena and
cannot be avoided, please also be aware.
Leather folds
Because of the difference in the production process of leather products, when
sewing, different sewing workers, different sewing skills, speed, and strength
will cause differences in the lines and stitch length of a certain part, so it
is normal to have wrinkles.
Odor
Non-spot goods will be arranged to manufacture after we get the purchase
order, which may have no deodorizing treatment performed. After our factory
finish the produce, the goods are packaged and send out immediately. There
will have some leather odor after you receive the goods, which is a normal
phenomenon and is harmless to humans.
The above situation is an inevitable defect of leather furniture.
Care and maintenance
Water stains or mildew
Moisten the cloth with soapy water and wring it dry and wipe off the mildew or
water stains on the leather.
Marks of ink or ballpoint pen
Put a few drops of clean water on the dirty place and clean it with a soft
eraser.
Oil stains
It can be wiped with a dry soft cloth, the remaining oil can be slowly
dissipated by itself, or it can be cleaned with detergent. Remember not to
clean oil stains with water.
Remove odor
First, clean the sofa as a whole with a damp towel (semi-dry). You can use
lemonade or pineapple for deodorization. Lemonade can wipe the leather part of
the sofa twice a day.
Wiping it for about a week will gradually reduce the smell. Using pineapple to
deodorize the pineapple slices can be placed on the sofa, wait for the
pineapple slices to run out of
moisture, then wipe the whole sofa with clean water, and then ventilate. Both
methods need to be carried out under ventilation and without strong light.
Cleaning and maintenance of furniture surface
When wiping, do not use a wet towel or damp cloth, generally use a dry cloth
to wipe it. When wiping the sofa, alkaline cleaning solution cannot be used,
as it will reduce the flexibility of the leather and cause wrinkles. Do not
place the sofa in direct sunlight or near a radiator or stove, nor in a place
where the air conditioner blows directly.
Avoid scratches by hard objects
Take care to prevent the metal parts of shoes or leather from scratching the
leather, and try to avoid pets approaching
FABRIC-UPHOLSTERED FURNITURE
Chromatic aberration
All products are taken in kind. Due to factors such as light and display,
there may be a slight difference between the actual product and the picture,
and the length of use of cloth and velvet products will slightly affect the
color. This is a normal phenomenon and cannot be avoided, please also be
aware.
The above situation will cause the color of the furniture to be inconsistent
with the reference object after it is received, please understand.
(Studio shooting, outdoor light, lighting, different monitors)
Care and maintenance
Avoid humid environment
Pay attention to moisture, and place the product in a dry and ventilated
place. In summer, if there is an indoor tide, it is advisable to use thin glue
to separate the parts of the furniture in contact with the ground, and at the
same time, keep the furniture against the wall with a distance of 0.5-1 cm.
Cleaning and maintenance of furniture surface
Use a clean cotton cloth, feather duster or special vacuum cleaner to clean
the sofa; if you spill liquid, please use a soft cotton cloth to suck it up in
time. And for the any residue, you can wipe it off from the periphery with a
clean cloth dampened with a special dry-cleaning agent.
Avoid direct sunlight
Should try to avoid the outdoor sunlight for a long time on the furniture,
when the sun is strong, transparent gauze curtains can be used to isolate the
direct sunlight, which will not affect the indoor lighting also have a protect
for the indoor furniture.
Avoid scratches by hard objects
In daily life, try to avoid sharp objects scratching the cloth surface to
prevent the sewing thread broken or products pilling.
Avoid high temperature
Do not put any hot drinks or food on the furniture.
MARBLE-MADE FURNITURE
Dark crack
The texture in the stone often show dark tones.
It is due to the fi ne gaps in the stone, the stains will be brought into the
stone by water stains settle down. This is a normal phenomenon and does not
affect normal use.
Chromatic aberration
Pure natural, natural texture and luxurious texture are the greatest value of
marble. For the marbles which with chromatic aberrations, we cannot say they
are “defective product.” Each piece of marble collected from nature is
different. Its colors and textures are only similar, but not completely the
same.
Scar
Natural marble will have blemishes, especially the appearance of stone scars
in Jazz White. Before production, we have strictly controlled the quality to
avoid such occurrences.
The above situation is an inevitable defect of marble furniture,
and the size cannot be controlled
Care and maintenance
Keep away from sharp objects
Do not use sharp objects to touch the table surface, which may cause scratches
on the surface. At ordinary times, attention should be paid to preventing
heavy objects such as iron objects from hitting the stone surface, so as to
avoid pits and affect the appearance.
Clean the desktop
Do not use acidic or alkaline cleaning fluids to clean the tabletop, use
neutral detergent or clean water
Product luminosity
As the use time of marble increases, the luminosity will decrease; as the
surface of black and white roots is extremely easy to oxidize, the luminosity
of the product will drop faster than that. In order to maintain the luminosity
of the product, customers can do regular maintenance by asking a professional
marble maintenance company to do it according to their own needs.
Waterproof and stain-resistant
The marble surface is a waterproof treatment,it has certain waterproof and
anti-fouling capabilities. However, it should not be directly exposed to wine,
soy sauce, tea and other substances for a long time. If you accidentally drop
it on the countertop, you need to wipe it off as soon as possible to avoid
penetrating into the countertop what may cause contamination of the
countertop.