eta Crema II Hand Mixer Electric Hand Beater Instructions
- June 5, 2024
- ETA
Table of Contents
INSTRUCTIONS FOR USE
Electric hand beater
eta 0052
INSTRUCTIONS FOR USE
Dear customer, thank you for purchasing our product. Please read the operating
instructions carefully before putting the appliance into operation and keep
these instructions including the warranty, the receipt, and, if possible, the
box with the internal packing.
SAFETY WARNING
-
Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
-
Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according to the national standard.
-
This appliance must not be used by children.
-
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. -
Children must be kept out of reach of the appliance and its power cord.
-
If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician, or a similarly qualified person so as to prevent dangerous situations.
-
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
-
Always unplug the appliance from the power supply if you leave it unattended and before assembly, disassembly or cleaning.
-
Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged, or if it has fallen into the water. In such cases take the appliance to a professional service center to verify its safety and correct function.
-
Be careful when pouring hot liquid into the food processing device or the mixer because it may spurt out of the appliance because of the sudden boil.
-
The appliance is intended for home use and similar (in shops, offices, and similar workplaces, in hotels, motels, and other residential environments, and in facilities providing accommodation with breakfast). It is not intended for commercial use!
-
When the appliance is in operation, prevent pets, plants, or insects to get in contact with it.
-
Never submerge the drive unit underwater and do not wash it under running water!
-
Do not plug or unplug the appliance from a socket with wet hands and do not pull the power cord!
-
Never leave the appliance unsupervised and check it during the whole time of water heating!
-
Use the appliance in the working position only at places with no risk of turning over and insufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill), flammable objects (e.g. curtains, drapes, etc.), and wet surfaces (e.g. sinks, washbasins, etc.).
-
This appliance is not intended for outdoor use.
-
The appliance must not be used in damp or wet environments and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints, and other flammable or volatile materials are stored).
-
It is not allowed to modify the surface of the appliance in any way (e.g. using a self-adhesive wallpaper, foils, etc.)!
-
Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
-
If the propulsion unit is operating, do not remove the accessories.
-
The maximum time of processing is 10 minutes. Then wait for 15 minutes, which is necessary for the drive unit to cool down.
-
Check if the switch is in the off position before each connection of the appliance to the el. outlet and always unplug the appliance from the el. outlet after finishing work.
-
Due to safety, it is not possible to change the attachments while the drive unit is in operation.
-
Do not use the accessories in containers, in which you heat food at the same time using heat sources (e.g. heater, electric/gas/induction cooker, hot plate, etc.).
-
Do not process foods with a temperature over approx. 80 °C (176 °F).
-
If the processed ingredients begin to stick to the accessories (e.g. whisks, kneading hooks, blender knife), turn the appliance off and clean the accessories carefully with a spatula.
-
Do not mix attachments (whisks B and hooks C).
-
Do not insert accessories into any body cavities.
-
Make sure that your hair, clothes, and accessories do not get into the dangerous vicinity of the rotating parts!
-
Never insert e.g. fingers, fork, knife, spatula, or spoon into rotating parts of the appliance and the accessories.
-
Make sure the whisks do not hit the walls of the utensils during operation or do not get stuck in the thick matter or frozen ingredients.
-
Make sure that the power supply cable does not get in between the rotating parts of the appliance.
-
The power cord must not be damaged by sharp or hot objects, or open fire, it must not b sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang over the edge of a table or work tables. Hitting, stumbling, or pulling the power cord e.g. by children can result in tilting over or drawing the appliance down and serious injury!
-
If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.
-
Check the condition of the power cord of the appliance regularly.
-
In order to ensure the safety and proper function of the appliance, use only original spare parts and accessories approved by the manufacturer.
-
Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.
-
Caution: Do not use the appliance with a program, time switch, or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
-
WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
-
All text in other languages and pictures are shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
-
The manufacturer is not responsible for damage caused by improper use of the appliance and the accessories (e.g. food deterioration, fire) and its guarantee for the appliance does not apply in situations when the safety warnings above are not complied with.
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. 1)
A – drive unit
A1 – speed selector
A2 – TURBO button
A3 – holes for connecting the accessories B, C
B – whipping beaters
C – kneading hooks
A4 – handle
A5 – power cord
A6 – accessories release button
PREPARATION FOR USE
Remove all the packing material and take out the beater with the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the
appliance. Before the first use,
wash the parts that will be in contact with food in hot water with a
detergent, rinse them thoroughly with clean water and wipe till dry, or let
them dry. Plug the power cord connector A5 to an electric socket.
Using individual levels, (fig. 2)
0 – off,
1 to 5 – speed options (using for whipping, mixing, kneading),
TURBO button – the motor is running at max. power the whole time the
button A2 is pressed, – maybe use at any speed level except 0.
USE OF THE ACCESSORIES
Whipping beaters (B)
Use: Whisking egg whites, mousse, creams, whipping creams, sponge cake
dough/batter, mashes, etc.
Switch level: 1 – 5, whipping time about 1 – 5 minutes
Insertion: Insert the beaters to the respective holes A3 in the lower
part of the drive to the maximum position. Release the whisks by pressing the
release button A6.
Recommendation
- When whipping, use the substances at room temperature.
- First, put liquid ingredients into the bowl, and only then put solid ingredients in to achieve the best results.
- First, whip at low speed so that the dough does not splash out. Only then you can go to a higher speed.
- If beating is not optimal, make sure that the beater is not greasy, or add a little lemon juice or salt.
- Cool the cream or whipping cream to at least 6 °C (at least 200 ml) before processing.
- We recommend using a narrow container for whipping cream.
- Never use whipping beaters for mixing tough materials, such as yeast dough.
Kneading hooks (C)
Use: Preparing spreads, mixing potatoes, spinach, mixing dough, etc.
Switch level: 1 – 3, kneading time about 1 – 5 minutes.
Insertion: Mutual position is given by their construction; for this
reason, mutual interchangeability of the hooks in the holes is not possible.
Insert the hooks to the respective holes A3 in the lower part of the drive to
the maximum position.
Release the hooks by pressing the release button A6.
Recommendation
- When kneading, use the substances at room temperature.
- First mix yeast in lukewarm milk. As soon as the dough gets into the shape of a ball, stop kneading as you are used to, or leave the dough to rise according to the recipe.
- When preparing the tough dough, we recommend putting loose ingredients in the bowl first for better mixing and then adding liquid ingredients.
Warning
- Switch on the appliance only when the accessories are immersed in the processed ingredients.
- The hooks and whisks can be released from the propulsion unit only when the speed selector A1 is in position 0.
- For whipping, only one whipping beater can be used in a suitable container. Choose the size of the container according to the amount of the prepared mass.
- When preparing a larger amount of dough (max. 0.5 kg / 1 batch) process it in several batches. Under no circumstances should you prepare more than two batches after each other.
- Various types of flour may differ significantly in the number of liquids needed and the stickiness of the dough may have a major effect on the loading of the hand mixer. If you hear that the hand mixer is being excessively loaded, turn it off, remove half the dough and process each half separately.
MAINTENANCE
Before any handling with the appliance or its maintenance, switch off the
appliance and unplug the power supply cord from the electric socket. Do not
use rough and aggressive detergents! Clean the drive unit with a soft and wet
cloth with a little detergent.
Make sure that water does not get inside the appliance. Wash the other
accessories right after use in hot water with a little detergent added, rinse
them with clean water and wipe
them till dry (you can also use a dishwasher). Some ingredients can color the
accessories in some way. But this does not affect the function of the
appliance and it is not a reason for a claim. This coloring usually disappears
in some time. Never dry plastic moldings over a heat source (e.g. heater,
stove, radiator). If the power cord becomes dirty, wipe it with a damp cloth.
Storing the appliance and accessories
Store the drive unit and accessories at a dry, dust-free place, out of reach
of children and legally incapacitated people.
ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge.
Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and
human health, which could be
the possible consequences of improper waste disposal. Ask for more details at
the local authorities or at a collection site. Fines can be imposed for
improper disposal of this type
of waste in agreement with the national regulations. If the appliance is to be
put out of operation, after disconnecting it from the power supply we
recommend its cutoff, and in this way, it will not be possible to use the
appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!
TECHNICAL DATA
Voltage (V)…………………………………………..specified on the type label of the appliance
Input (W) …………………………………………….specified on the type label of the appliance
Weight of drive unit (kg) about……………….. 0.85
Size of the product (mm) ……………………..155 x 85 x 190
Protection class of the appliance ………..II.
Noise level: Acoustic noise level of 82 dB(A) re 1pW
Input in off mode is < 0,50 W.
The manufacturer reserves the right to change the technical specifications
and accessories for the respective models. The pictures are only illustrative,
the supplied accessory and appliance may differ.
© DATE 19/3/2021
e.č.09/2021
Documents / Resources
| eta
Crema II Hand Mixer Electric Hand
Beater
[pdf] Instructions
Crema II Hand Mixer Electric Hand Beater
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>