KENWOOD KMX750 kMix Stand Mixer Instructions

: June 5, 2024
: KENWOOD

Table of Contents

[
KENWOOD KMX750 kMix Stand Mixer
[INSTRUCTION
- Special Care Instructions
The mixer
[
- the mixing tools and some of their uses
tool adjustment
Troubleshooting guide
cleaning and service
Service and customer care
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

[

Kenwood ](https://manuals.plus/wp- content/uploads/2022/05/Kenwood.png)

KENWOOD KMX750 kMix Stand Mixer

INSTRUCTION[

KENWOOD-KMX750-kMix-Stand-Mixer-2 ](https://manuals.plus/wp-content/uploads/2022/05/KENWOOD-KMX750 -kMix-Stand-Mixer-2.png) know your Kenwood kitchen machine

safety

Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
Switch off and unplug before fitting or removing tools/attachments, after use and before cleaning.
Keep your fingers away from moving parts and fitted attachments.
Never leave the machine on unattended.
Never use a damaged machine. Get it checked or repaired: see ‘service and customer care’.
Never let the cord hang down where a child could grab it.
Never let the power unit, cord or plug get wet.
Never use an unauthorised attachment or both outlets at the same time
Never exceed the maximum capacities.
When using an attachment, read the safety instructions that come with it.
Take care when removing bowl tools after extended use as they may get hot.
Take care when lifting this appliance as it is heavy. Ensure the head is locked and that the bowl, tools, outlet cover and cord are secure before lifting.
When moving the appliance always pick up by the pedestal base and mixer head. Do not lift or carry the appliance by the bowl handle.
Do not move or raise the mixer head with an attachment fitted as the Kitchen Machine could become unstable.
Do not operate your appliance near the edge of a work surface.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Children should be supervised to ensure that they do not play with the appliance.
Misuse of your appliance can result in injury.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Glass bowl

Before using ensure that your bowl tools are adjusted to the correct height and not in contact with the bottom of the bowl – refer to “tool adjustment” section.
To avoid damage to the glass bowl do not allow the bowl to come in contact with sources of high heat such as an oven or stove top.
The glass bowl is microwave safe.

Special Care Instructions

Glass is a natural material, during the manufacture of this bowl every care has been taken to ensure a perfect appearance, however some small imperfections may be visible, this is normal and to be expected, the performance of the bowl will not be affected.

before plugging in

Make sure your electricity supply is the same as the one shown on the underside of your appliance.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.

before using for the first time

Wash the parts: see ‘care and cleaning’ section.

The mixer

[

KENWOOD-KMX750-kMix-Stand-Mixer-1 ](https://manuals.plus/wp-content/uploads/2022/05/KENWOOD-KMX750 -kMix-Stand-Mixer-1.png)

Key

mixer head
attachment outlet
outlet cover
tool socket
bowl
- stainless steel (if supplied)
- glass (if supplied)
on/off and speed control
mixer ready indicator light
mixer body
head release lever
cord storage
K-beater
whisk
spiral dough hook
creaming beater (if supplied)
folding tool (if supplied)
spatula
splashguard

the mixing tools and some of their uses

K-beater

For making cakes, biscuits, pastry, icing, fillings, éclairs and mashed potato.

whisk

For eggs, cream, batters, fatless sponges, meringues, cheesecakes, mousses, soufflés. Do not use the whisk for heavy mixtures (e.g. creaming fat and sugar) – you could damage it.

dough hook

For yeast mixtures.

folding tool

The folding tool is designed for folding light ingredients into heavier mixtures for example meringues, mousses, fruit fools, Genoese sponges, soufflés and to fold flour into cakes mixes. It is not to be used with heavy recipes such as dough, creaming fat and sugar or all in one cake mixes.

creaming beater

The creaming beater is designed for creaming and mixing soft ingredients. Do not use with heavy recipes such as dough or hard ingredients, for example those containing fruit stones, bones or shells.

fitting the wiper blade

The wiper blade is supplied already fitted and should always be removed for cleaning 15
1. Carefully fit the flexible wiper blade onto the tool by locating the base of the wiper blade into the slot bk then fit one side into the groove before gently hooking the end in place bl. Repeat with the other side bm.

to use your mixer

Lift the head release lever 9 at the back of the kitchen machine 1 and at the same time lift the head 1 until it locks in the raised position 2.
Place the required tool into the socket. Then push up 3 and turn 4 the tool to lock into position.
Fit the bowl onto the base. Place the handle directly over the unlock symbol , then gently turn the bowl clockwise until the handle is directly above the lock symbol . DO NOT USE excessive force and DO NOT overtighten 5.
Lift the head release lever 9 at the back of the Kitchen Machine and at the same time lower the mixer head 1.
Plug into the power supply and the ‘mixer ready indicator light’ will illuminate.
Switch on by turning the speed control to the desired setting.
Release the tool by turning clockwise to unlock from the tool socket and then remove.

Important

If the mixer head is raised during operation, the machine will stop working straight away. To re-start the mixer, lower the mixer head, turn the speed switch to the ‘O’ position, wait a few seconds and then re-select the speed. The mixer should resume operating straight away.
Whenever the mixer head is raised the ‘mixer ready indicator light’ will go out. When the head is lowered, the light will illuminate indicating the mixer is ready to use. hints
The fold function can be used for folding light ingredients into heavier mixtures for example meringues, mousses, fruit fools, Genoese sponges and soufflés, and to slowly incorporate flour and fruit into cake mixtures. The mixer will operate at a constant slow speed.
To fully incorporate the ingredients stop mixing and scrape down the bowl with the spatula.
Eggs at room temperature are best for whisking.
Before whisking egg whites, make sure there is no grease or egg yolk on the whisk or bowl.
Use cold ingredients for pastry unless your recipe states otherwise.
When creaming fat and sugar for cake mixes, always use the fat at room temperature or soften it first.
Your Kitchen Machine has been fitted with a ‘soft start’ feature to minimise spillage. However if the machine is switched on with a heavy mixture in the bowl such as bread dough, you may notice that the mixer takes a few seconds to reach the selected speed.

electronic speed sensor control
Your mixer is ﬁtted with an electronic speed sensor control that is designed to maintain the speed under different load conditions, such as when kneading bread dough or when eggs are added to a cake mix. You may therefore hear some variation in speed during the operation as the mixer adjusts to the load and speed selected – this is normal.

important points for using your folding tool

Do not use a high speed as a low speed is required to optimise the folding performance.
The tool is not designed to be used to mix hot ingredients, allow the ingredients to cool before using the folding tool.
For best results do not over whisk egg whites or cream – the folding tool will not be able to fold the mixture correctly if the whisked mix is too firm.
Do not fold the mixture for too long as the air will be knocked out and the mix will be too loose. Stop once the mix is sufficiently incorporated.
Any unmixed ingredients left on the paddle or sides of the bowl should be carefully folded in using a spatula.

important points for bread making

Never exceed the maximum capacities -you will overload the machine.
If you hear the machine labouring, switch off, remove half the dough and do each half separately.
The ingredients mix best if you put the liquid in first.

recommended speed chart and maximum capacities

Adding water to combine pastry ingredients

| Min to Speed 2

Min

| 2-3 mins

30 secs

2.17kg/4lb 13oz

total weight

recommended quantity chart – folding tool

mins

| Whisk the eggs and sugar until they are thick, pale and creamy.
Folding Tool| Flour| 85g| 250g| Fold function| 2 – 8

mins

| When adding the flour, place it onto a sheet of grease proof paper, fold the side in to form a spout. Gradually add the flour into the mix using fold function. This operation can take up to 8 minutes, so be patient and wait until the last addition of flour has been incorporated into the mix before adding more.
Total mix| 350g| 1kg
Soufflés| Whisk| Eggs| 2| 6| Max| 1 min| Whisk in a quarter of the whisked egg whites on speed 3 before folding in the remaining egg whites.
Folding Tool| Total mix| 300g| 900g| Fold function| 1 min
Fruit Fools| Whisk| Cream| 125ml| 600ml| Max| 1 – 2

mins Max

|
Folding Tool| Fruit Puree| 80g| 400g| Fold function| 1 – 2

mins

Fold in the egg whites a bit

at a time.

The above information is for guidance only and will vary depending on the exact recipe and ingredients being processed.
Egg sizes used in chart = medium (53g – 63g).

to fit and use your splashguard

Raise the mixer head until it lock
Fit the bowl onto the base.
Push the splashguard onto the underside of the mixer head 6 until fully located. The hinged section should be positioned as shown.
Insert required tool.
Lower the mixer head.

tool adjustment

K-beater, Whisk, Creaming beater and folding tool

The tools are set to the correct height for the bowl supplied in the factory and should not require adjustment. However, if you wish to adjust the tool use a suitable 15mm spanner: Then follow the instructions below:

Unplug the machine.
Raise the mixer head and insert the whisk or beater.
Lower the mixer head. If the clearance needs to be adjusted, raise the mixer head and remove the tool. Ideally the whisk, K-beater and folding tool should be almost touching the bottom of the bowl 8.
creaming beater: Ideally it should be in contact with the bowl surface so that it gently wipes the bowl during mixing bn.
Using a suitable spanner loosen the nut sufficiently to allow adjustment of the shaft 9 or bo. To lower the tool closer to the bottom of the bowl, turn the shaft anti-clockwise. To raise the tool away from the bottom of the bowl turn the shaft clockwise.
- During mixing, ingredients can be added directly to the bowl via the hinged section of the splashguard 7.
- You do not need to remove the splashguard to change tools. Remove the splashguard by raising the mixer head and sliding it down.
Re-tighten the nut.
Fit the tool to the mixer and lower the mixer head. (Check its position see points above).
Repeat the above steps as necessary until the tool is set correctly. Once this is acheived tighten the nut securely.
Note: Spanner shown is for illustration purpose only.
Dough Hook: This tool is set at the factory and should require no adjustment.

Troubleshooting guide

Problem	Cause	Solution

The whisk or K-beater knocks against the bottom of the bowl

or not reaching the ingredients in the bottom

of the bowl.

cleaning and service

care and cleaning

Always switch off and unplug before cleaning.

power unit and outlet cover

Wipe with a damp cloth, then dry.
Never use abrasives or immerse in water.
Store excess cord into the cord storage compartment bk at the back of the machine.

stainless steel bowl

Wash by hand, then dry thoroughly or wash in the dishwasher.
Never use a wire brush, steel wool or bleach to clean your stainless steel bowl. Use vinegar to remove limescale.
Keep away from heat (cooker tops, ovens, microwaves).

tools and splashguard

Wash by hand, then dry thoroughly or wash in the dishwasher.

creaming beater

Always remove the flexible wiper blade from the tool before cleaning bp.
Wash the flexible wiper blade and tool in hot soapy water, then dry thoroughly. Alternatively the parts can be washed in a dishwasher.
Note: Please inspect the condition of the tool body before and after use and also regularly inspect the condition of the wiper blade and replace it if there are any signs of wear.

glass bowl

Wash the bowl in hot soapy water, then dry thoroughly.
Alternatively, the bowl is dishwasher safe.
Note: The collar on the base of the bowl is removable and can be washed in the same way. To remove the collar, upturn the empty bowl and unscrew the collar in an anti-clockwise direction.

Service and customer care

If you experience any problems with the operation of your appliance, before requesting assistance refer to the “troubleshooting guide” section in the manual or visit www.kenwoodworld.com.
Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.
Designed and engineered by Kenwood in the UK.
Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Kenwood Ltd