TRUVIEW TI-NBD5152/2302 Wireless Ethernet Bridge User Guide
- June 3, 2024
- TRUVIEW
Table of Contents
TRUVIEW TI-NBD5152/2302 Wireless Ethernet Bridge
How the DIP Switch Works?
Button 1 changes the mode of the device.
UP is access point (AP: Master) mode for using with your recorder, PC, etc..
DOWN is CPE (Slave) mode for using with your cameras.
Button 2 to 8 are for matching AP and CPE together
Ditferent combinations corresponds to ditferent SSIDs and different segments
Button 9 &10 are for point to multi-point functionality. To use one AP
matched with a maximum of four CPE, different combinations of svwitches 9&10
stand for different CPE.
Sample DIP Setup
- Setup the Working Mode of all APs. (Pin 1)
- Set the Frequency of AP (master: Pins 2-8).
- Follow the Frequency Pattern of AP (master: Pins 2-8) in CPE (slave: Pins 2-8).
- Set the D Keys of CPE (slave: Pins 9-10).
- Follow the procedure in other AP (master) & CPE (slave) but in different Frequency Pattern.
Transmission Angle of Wireless AP
The farther the distance, the greater the scope of coverage.
The smaller the angle, the farther the transmission distance.
Truview DIP Function
No need to have a computer for operation, no technical settings, do not need
professional network knowledge. Easy dip settings to achieve wireless
Communications.
TruView’s Network Bridges (TNB) are specialized for CCTV Video Transmission
compare to other AP brands which are mainly designed for NETwORK transmission.
TNBs can transmit video data from 1km to 6km, meeting most of the CCTV
transmit SIon range.
Connection Diagram
Connect the yellow port of the AP to PoE port of the power adapter
Connect the LAN port of the adapter to the camera/laptop
POE port connect with LAN port of CPE
POE LAN port connect with PC(Switch or NVR)
NOTE:
- Both ports of CPE are LAN.
- If you want to enter web page,you need manually bound P address of PC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>