tuya AHD Video Intercom System Indoor Monitor Instruction Manual

AHD Video Intercom System Indoor Monitor

OPERATION INSTRUCTION
AHDVideoIntercomSystem
IndoorMonitor
UserManual
Statement
If there is any doubt or disputable regarding information in this manual, you can call
our company for clarification.
There maybe some difference between the description provided here and the actual
devices, as our products are constantly developing and upgrading. We apologize if
this manual does not contain all of the latest updates. Thanks
86706-MC-0310 V1.0
INDOOR MONITOR SPECIFICATION
Note: The following are diagrams of all of the available indoor unit models, not all
models have the same layout or features, please take actual model as quasi.

1 2
CONTENTS
PAGE
Indoormonitorspecification
Installationnote
CallTransfertootherextension
MenuOperations
InstallTheIndoorUnit
Accessories
WiringDiagram
OperationIntroduction
Monitoring
MotionDetection
Internalcommunicationamongindoorunits
AlarmInstructions
1. 2
2. 5
3. 5
4. 6
7
7.
8.
9.
5.
6. 8
8
9
10.
10
11.
12.
21
21
22
1
4
7
2
5
8
3
6
9
10
11
12
13
NO.
LED1
LED2
LED3
TFTdisplay
Microphone
Increasevolume
Decreasevolume
Soundfromoutdoorcamera
Decreasetheringervolumeoftheindoordeviceordecreasevolumefor
theindoordeviceduringintercom.
IncreasetheringervolumeoftheindoordeviceorIncreasevolumefor
theindoordeviceduringintercom.
Name
PowerLED
Door1LED
Door2LED
Menubuttonandconfirmbutton
Startmanualredordorstopmanualrecord.
Humanbodysensortouchbuttons
Viewvisitor’simagedisplayedontheTFTscreen
Transmitthevoicetooutdoorcamera
ForthemodelswithSDcard,InserttheSDcardforrecording
Tocaptureaframeofthevideostreamasastillphoto.
Descriptions
Operationbutton
Speaker
Settingsbutton
Snapshot
SDcardslot
Record
3 4
AC/DCpoweradapter
forcamera(notincluded)
AC/DCpower
adapter
forunlocking
(notincluded)
AC/DC
electriclock
AC (notincluded)
/DCpower
adapter
forunlocking
(notincluded)
AC/DC
electriclock
(notincluded)
AC/DCpoweradapter
forcamera(notincluded) Externalswitchingpowersupply
(AC100V-240V)–optional
DESCRIPTION ON SYMBOL
Internalcall,transfercallandcolorcoordination
1.Onstandbymodelongtimepress callslavemonitordointernalcall.
2.Duringoutdoorstationtalkwithindoormonitor,longtimepressdo
transfercall.
3.During talking or monitoring, press dispaly show color coordination:
volume, brightness,contrast,saturability,refresh,returnback(volume
adjustforoutdoorstationand indoor monitor talkingsounds;Refresh:
whenmix connect PAL/NTSCcctvcameraoroutdoorstationand
CVBS/AHDcctvcameraorourdoorstation;during keeppoweronand
dosomeconnectionchangeforcctvcameraoroutdoorstation,ifno
imagecomein,pleasepress”R”refreshsignal.

Monitoringoutdoorstationimage
Receivedvisitorcallandtalking,duringmonitoringpresscan
talkwithoutdoorstation.
Increasingbutton
Movetonextitem.Ifuseitforadjustthevolume,scrollupisforincrease
thevalue.
Movetonextitem.Ifuseitforadjustthevolume,scrolldownisfor
decreasethevalue.
idlerwheelmoveup
idlerwheelmovedown
Compositekeys(mainmenu+confirm)
1.Instandbymode,pressentermainmenu.
2.Onmainmenu,pressmeansconfirm.
3.Ontalkingormonitoringmode,ifsetasrecording,pressstop
record,pressagainstartnewrecord;ifsetassnapshot,press
snapshotonepicture.
4.Duringplaymusics,videosandpictures,presspause,press
againiscontinute.Playmusicsorvideos,keeplongtimepress
displayvolumebar
Decreasingbutton
Settingbutton
Transferbutton
Monitoring
Talkbutton
Unlockbutton
Hangupbutton
Backbutton
Volumebutton
Presscanbacktothepreviouspage
Openthedoor
Talkingvolumesetting
idlerwheelmoveupmeans”+”.idlerwheelmovedownmeans”-”.
Endoftalk
5 6
OPERATION INTRODUCTION
VISITOR CALL
Standby mode
The visitor press
the call button on
outdoor camera 1
The visitor press
the call button on
outdoor camera 2
Outdoor station and
Indoor monitor can
hear the ring tone,
default ring tone time
30s. NOTICE:
Ifpresscallbuttonfromtwooutdoorunitsatthesametime,
thefirst outdoor unit will ring, another one no response,
unlesscommunicationbacktostandbyinterfacethenpress
callbuttonagain.
Notice:Pressbackbuttontotuneoutthecoloroptionin
communication,pressortomovecursorselect
“volume”press,thenpressbuttonincreasethe
volume,pressbuttontodecreasethevolume.
Ifnooneathomeornooneanswer,outdoorunitwill
prompts“Pleaseleaveamessage”,itwillhave60s
messagetime,andbacktostandbymodeafter60s.
Unlockthelockwheninacall,pressunlockbutton
tounlockthedoor,ringtonestop.
Boththevisitor’svoiceandimagewillbenotswitchedoffwithin20softimespanwhenthe
unlockbuttonispressed,thisindividualizedfunctionallow you to make sure whether the
visitoralreadycomein.
ForthemodelswithSDcard,whenthedoorbell record for the video mode: From the start
ofacall,thewholeprocesswillberecording.If the user press the button , the recording
will be stopped manually.
ForthemodelswithSDcard,whenthedoorbellrecordforthesnapshotmode:Thewhole
processwillbecapture,usercanpressthebuttontocaptureanimage.
Wheninacall:themachinecanlistentothesoundoftheoutdoormachine,youcanpress
thebuttontoconversationandpressthebuttontounlock.
Wheninacall,can’tpressmonitortoswitchover.
Wheninacall,ifanotheroutdoorunitcallorstartalarm,indoorunitwillhavetextorsound
“du..du..du..”prompt.
The visitor’s image
automatically displayed on
the screen
NOTICE:
End
release the
door lock
The conversation
duration is 120s
at a time
Start conversation
with outdoor camera
Stop ringing
Press the talking
button on indoor
monitor
Press the unlock
button on indoor
monitor
Press the hang up button
on indoor monitor
INSTALLATION NOTE
Theelectriclock/alarm/cameraisnotincludedinthepackage,youcanpurchaseanelectriclock
whichissuitableforactualrequirement.
InthestandarddeliverythesystemsupportslockswithNormallyOpen(N.O.)doorunlocking
method.Itmeansthatinthenormalstatethedrycontactisopenedsothelockiskeptunder
constantclosed state.Iftheunlockingpush- buttonispressedandthedrycontactischanged
toclosed,thenthelockisreleased.
Indoormachinepowerwithabuilt-inpoweroranexternal power optional. Please refer to actual
controlusing.Iftheindoormachinewithabuilt- inpowersource,applicabletowidevoltagerange
(AC100V- 240V).PleasefirstpullouttheACpowerplugbeforeinstallationofdevice(shownas
below).
Useandselectionofwire,pleaserefertothefollowing.(Theactualeffectandthequalityofwire
rodhastheverybigrelations)
1.4C ordinary unshielded and shielded wire connection mode:
2.3Cordinaryunshielded+videowire(75-3)connectionmode:
3.CAT5networkcableconnectionmode:(Notrecommeded)
Unshieldednetworkcable(≤50m)
(≤100m)
Distance≤28m(40.2mm²); Distance≤50m(40.3mm²); Distance≤80m(4*0.5mm²)
WIRING DIAGRAW
4C 4C 4C
4C
4C
4C
4C
CAM1
Alarm
Alarm
CAM2
7 8
2 3 4 5 6
2 3 4 5 6
CALL TRANSFER TO OTHER EXTENSION
INTERNAL COMMUNICATION AMONG INDOOR UNITS
Internalcommunicationfunctionrequiresatleasttwoindoorandoneoutdoorunitstobe
connected.
Outdoorcameracallindoormonitorand
conversationisunderway
Thecalledslavemonitor
willgetringtone
Keeppressing
theTransferCall
button
Selectaextension
whichyouwant
Thecalledslavemonitor
willgetringtone
Startconversation
amongindoorunits
PressHang
upbutton
End
Atleast2indoorunitsisrequired.
keeppressing
transfercall
buttontoactivatethefunctionofcalltransfer
totheextensionwhichyouchoose
Pressthetalking
buttononcalledof
indoorunits
Standby mode
Pressthetalking
buttononcalledof
indoorunits
NOTICE:
NOTICE:
Pressthebuttonorupwardor
downwardtoselecttheextension,then
presstoconfirm.
Notice:Press back button to tune out the
coloroption,pressorbuttonto
move cursor, select “volume” press
thenpressincreasevolume,press
todecreasevolume.
Pressthebuttonorupwardor
downwardtoselecttheextension,then
presstoconfirm.
Notice:Intercomcan’ttuneoutcoloroption,
can’tadjustcommunicationvolume.
MONITORING
Standby mode
Optioninthesettingsinthemenu:DOOR1,CAM1,DOOR2,CAM2operatingmode(openorclosed)
Ifyouareusingonlyoneoutdoorcamerain monitoring mode, you can also end the monitoring
modebypressingthe monitoring button again (Must be Close CAM1 DOOR2; CAM2 in the
menuoption).
Ifyouusetwoindoorunits,youcanalsosimultaneously in other indoor unit starts monitoring
mode,thesameimagesaredisplayedonthescreenofthedifferentindoorunit.
Whenintercominmonitormode,if outdoor station call, the monitor will end up communication
orswitchtocallimage.
WithSDcard,ifrecordmodeisvideo,pressfirsttimesettingbuttonstarttorecordavideo,
presssettingbuttonagainwillstoprecording.Ifrecordmodeis snapshot, press next setting
buttonwillsnapshotapicture,andwillsnapshotmorepictures.
NOTICE:
9 10
In standby mode, press the button to access the main menu interface, shows the main
interfaceasshownbelow.Onmenus,pressorupward or downward to move the cursor
totheoptionyouwant,andthenpressbacktopreviousstep.
MENU OPERATIONS
The clock is displayed in the monitor with standby state by default. If the digital photo frame
function is on, the image saved in the SD card will be automatically played in standby state.
Iftheuserdidnotdoanyoperation. system will be back to standby mode after 60s (except playing
music, video, picture). Clock keep display 60s on standby mode, after enter black screen protection.
Pressthebuttonorupwardordownwardtomovethecursortotheoption“System”,then
presstoenterthe “System” menu. System setup includes:“Lanugage”, “Time” , “Information”,
“Ring”, “Volume”, and “network setting”.
1.Set System Parameters
There are two ways to display in the standby status
Time&Datestandbymode Digitalphotoframestandbymode
10:50
Monday
07-08-2017
SDcardmusthavenamewith“ring”and“user”two folders, the music must save in ring
folder, system can find it, identify it and set it as definite ring tone. Pictures must save
inphotofolderof“user”,canbefoundandshow,videosavedin“user”filecanbefound
andshow.
MOTION DETECTION
2.Pressthebuttondownwardto move the cursor to the option “Motion Detection”, the motion
detectionhas4CH for choose: Door1, Door2, CAM1, CAM2; but you can only choose one option
when working.
3.Onstandbymode,whendetectmotionstarttorecordingorsnapshot.
1.Onstandbymode,presstoenterintothemainmenuasthefollowingpicture.Itincludes
system, time, digital photo, mode, meida, record. Pres or to move the cursor and return
buttontobacktothestandbymode.
11 12
Note: The product only supports the SD cards that are written at a speed
of more than 10MB/s with a memory of less than 32G.
Note: The system upgrade can be upgraded using the SD card, and the system
upgrade is illustraded in the media menu.
[Reboot]:
[Update]:
[Format SD card]:
[Door1]:
[Door2]:
[Mode]:
[Return]:
Movethecursorto“”andpress.Itwillpop-upawindow,choose“Yes”
torestartthemachine,choose“No”tocancel.
UserscanupgradethefirmwareofthedeviceviaSDcard.
MovethecursortoFormatSDandselect“”.Press,thepop-up
windowwillremindifformatSDcardisneeded.Select“Yes”toforwardand“No”
tocancel.Iftheformatcardisfinished,therewillbenotification of “format SD
cardsuccessfully”
Twotypemode:DefaultorCustombell(Notice:CustombellselectfromSDcard).
Twotypesofringtone:DefaultorCustombell.DefaultRingtone:Built-inringtonefrom
systemCustombell:DownloadmusicsaveonSDcardandselectitasringtone.
Exitthecurrentmenu.
Onsystemmenu,movethecursortotheoption“Ring”,thenpresstoenterthe“Ring”menu,
setupthedoorbelltoneoftheoutdoorcamera.
2. Ring select
Setupfilefoldernameas“Ring”fromSDcard,keepallmusicunder“Ring”folder,afteritcan
befoundandselectascustomsbell.
Musicnameshouldcreatasring_1~ring_12.
Twotypemode:DefaultorCustombell(Notice:CustombellselectfromSDcard).
Inthesystemmenu,movethecursorto“Clock” and press to enter the “clock” menu. The clock
switchcontrolswhether the clock is displayed in the standby mode, the on is the open display, and
theoffisclosed.Mobilecursorto“clock”,presstoturnofftheclock,andthenwillnotdisplay
theclockwhenstandbymodeisclosed.The screen is all black, and the digital photo frame will not
beopened,norwillthepicturebeplayed.“Dateformat”can set the display format of the clock in
themainmenuandstandbymode.Press the key to move the cursor down key to move up the cursor.
Selecttheparameteroptionaccordingtothesetting key to confirm the adjustment, then press the
buttontoincreasethevolume,pressbutton to reduce the volum, adjustitandpress
toconfirm.
On“system”menu,move the cursortothe “system information” and press button into it. It
includessoftwareversion,MCUversion,releasedate,reboot,SDfreespace.
Insystemmenu,movecursorto “Language” ,pressenterto “Language”menu.Itistomodify
menu text and screenlanguageofindoorunit.Press one time, the arrows in two sides will
changecolor,meanscanadjustparameters,pressconfirmagain after adjustment, languagesetup
successfully.
1.1 System – Language
1.2 System – Clock
1.3 System – Information
13 14
Notice: Localinternetwillrememberlastconnectwifiinformation,sorebootmonitorwillautoconnectwifi.
Inordertomakesureandcheckwificonnectsuccess,throughmonitorQRcode andscanit,
APPwilldisplaymonitorconnectordisconnectSIPserver.

“Onsystemmenu,movethecursorto“Volume”andpresstoenterthe“Volume”menutoset
uptheringvolume.Userscansetupdifferentringvolumeduringthreedifferenttimeperiod,the
vibrateandringtimecanbeadjustedfrom10sto45swhencalling.
Thetimingvolumeisthevolumeofthecall.
3 Ring Volume
[Ring Vol1]:
[Ring Vol2]:
[Ring Vol3]:
[Button Voice]:
ThevolumelevelofRingVol1:01-10.
ThevolumelevelofRingVol2:01-10.
ThevolumelevelofRingVol3:01-10.
Thisoptioncanopenorclosebuttonvoice.
Note:
4. System-Network Setting
4.1 WiFi Set
4.2 Server setting
Smartlink mode connection:
AP Mode:
Enternetworksetting,monitorconnectnetworkandserver, outdoor station call indoor monitor,
smartphoneAPPgetmessageatthesametime.Networksettingincluded:wifisetandserverset.
Twomode:SmartlinkandAPmode.
ChoosesmartlinkmodeorAPmodeconnectwifi,aftermakeserverset.
Notice: UseWiFisetfunctionmustbeworkwithsmartphone,APPnam（e Wifiintercom-D）
Andrioddownloadfrom“GooglePlay”,IOSdownloadfrom“APPStore”
(1).Usesmartlinkandconfirm,interfacetips”smartlinkmodeactivepleasewait…..”
(2).Monitortips“pleasechoosesmartlinkmodefromAPPandsendSSIDandpassword”
AtthismomentswitchonAPP(Wifiintercom-D)andpress“+”entersmartlinkmode,inputwifi
passwordpressnextstep.
(3).Sendrightinformationmonitortips”connectrouter,pleasewait……”monitorautoregisterfrom
serverwithin3Min.Note:duringprocessdonotpressanybutton,feedbacksuccessfultipsanddo
nextstep.
(4).After,interfaceshowwificonnectingtips,ifwifiname,passwordorovertimeconnection,please
startfromstep1again.
(5).Ifmonitordisplay“registerserversuccess”tipsmeansconnectwifisuccess,presssettingkey
confirm,andbacktostandbymode,leftcornerappearwifiiconmeansmonitoralreadyconnect
wifi.
(6).Interfaceconnectsuccess.
(1).ChooseAPmodeandconfirm,monitoractivesmartbellwififlashpoint.
(2).Monitorshowtips”,pleasechooseAPmodefromAPPandsendSSIDandpassword”Smart
phoneconnectwifiname:smartbellwifipassword：87654321,connectionsuccessed,switch
onsmartphoneAPP(Wifiintercom-D),press“+”enterAPmode,inputwifinameandpassword,
pressnextstep.
(3).Sendrightinformationmonitortips“connectrouter,pleasewait……”monitorautoregisterfrom
serverwithin3Min.Note:duringprocessdonotpressanybutton,feedbacksuccessfultipsand
donextstep.
(4).After,interfaceshowwificonnectingtips,ifwifiname,passwordorovertimeconnection,please
startfromstep1again.
(5).Ifmonitordisplay“registerserversuccess”tipsmeansconnectwifisuccess,presssettingkey
confirm,andbacktostandbymode,leftcornerappearwifiiconmeansmonitoralreadyconnect
wifi.
(6).Interfaceconnectsuccess.
(1).Enter“Serverset”choosetheserverwhichonenearbyyourlocated,whentips“serverregister
success”openAPP（Wifiintercom-D）press“+”scanQRcode
(2).Bindingsuccessbacktostandbymode, interfaceright cornerappear “network” iconmeans success.
(3).Ifwifiandserverconnect success, outdoorstation call indoor monitor, smart phonecan get message
atthesametime.
[Door2 status]:
[Message]:
[Record mode]:
[Motion Detection]:
[Door1 Unlock Time]:
[Door2 Unlock Time]:
[Return]:
EnableordisablethepreviewofDoor2.
Enableordisablemessage.
Optionsinclude:VideoandSnapshot.Videomeanswhenthevisitorpresses
thecal l button of outdoor unit, the indoor monitor with the SD card wi l l
automaticallystartthevideountiltheendofthecallortheuser’smanualstop.
Thesnapshotmeans that when the visitor press the call button of outdoor unit,
theindoormonitorwithSDcardautomaticallysnapshotthenextphotoofthe
doorway camera, and the user can press manually for continuous
snapping.
Optionsinclude“Door1”,“Door2”,“CAM1”,“CAM2”and“Disable”.
From02secondsto10seconds.
From02secondsto10seconds.
Exitthecurrentmenu.
“Onmainmenu,movethecursortotheoption“Alarm”,thenpresstoenterthe“Alarm”menu.
7. Set the alarm parameters
[Alarm record]: Optionsinclude“Video”and“Snapshot”.“Video” indicates that whenanalarm
is triggered, it will activatethecorrespondingchanneltostartalarmrecording.
“Snapshot” indicates that when an alarmis triggered, itwill activate the corresponding
channeltocaptureapictureofthecurrentvideostreamasastillphoto.
“Onmainmenu,movethecursortotheoption“Mode”,thenpresstoenterthe“Mode”menu.
6. Set the mode of indoor unit
[Mode]: Options include “01,02,03,04,05,06”. “01” indicates that theindoorunitasmaster
monitor,“02-06”indicatesthattheindoorunitasslavemonitor.
5. Digital Photo
Note: If open digital photo, can’t use motion detection.
“Onmainmenu,move the cursor to the option “Digital Photo” ,thenpresstoenterthe“Digital
Photo”menu.(forthemodelswithSDcard)
[Digital Switch]:

Thisoptioncanopenorclosedigitalswitch.
Thereneedtobeseparatedfilenamed as “User” for SD card. The picture can only be found
andshownwhentheyaresavedinthefilenamed“User”.
15 16
[CAM1 Sensor type]:
[CAM2 Sensor type]:
I/O status types:
CAM1channelcorrespondstoanI/Ostatus(seethefollowingstatus
explanations),whichmeansthatwhenanalarmistriggered,itwillactivate
thecorrespondingchanneltostartalarmrecordingorcaptureasnapshot.
CAM2channelcorrespondstoanI/Ostatus(seethefollowingstatus
explanations),whichmeansthatwhenanalarmistriggered,itwillactivate
thecorrespondingchanneltostartalarmrecordingorcaptureasnapshot.
No: “Normalopen”,itmeansthatinitsnormalstate,thesensoriskeptunderconstantlowvoltage.If
theoutputvoltagechangesfromlowtohigh,thenthealarmwillbetriggered.
NC: “Normalclosed”,thenormalstateofthesensorisunderconstanthighvoltage.Iftheoutput
voltagechangesfromlowtohigh,thenthealarmwillbetriggered.
Disable: SettheI/Oto“close”,ifexternalsensoralarmsarenotinuse.
[CAM1]:
[CAM2]:
[CAM1 ring time]:
Enableordisablethepreviewofcamera1
Enableordisablethepreviewofcamera2
Thealarmringtimeofcamera1ifcamera1hasbeentriggeredbyactivety
detectedbythesensor,valuescanbesetfrom0~20seconds.
Note:Setupfilefoldernameas“Music”fromSDcard,keepmusicunder“music”folder.“music”
foldermax.save30music.
03:52
By2 9.00M
02:12
[CAM2 ring time]:
[Return]:
Thealarmringtimeofcamera2ifcamera2hasbeentriggeredbyactivety
detectedbythesensor,valuescanbesetfrom0~20seconds.
Backtopreviousmenu.
“Onmainmenu,movethecursortotheoption“Media”,thenpressto enter the “Media” menu.
Optionsinclude“music”,“photo”and“File”(forthemodelswithSDcard).
8. Media
8.1 Music ( for the models with SD card )
Inthemediamenu,pressortomove the cursor to the “music” option, press
intotheplaylist,automatically play the first music into the music list, pressing movethecursor
down,pressmove the cursor moving upward, keep pressing theismoveforward,keep
pressisbackforward,pressonce to pause, select a song with setting is confirmed to play,
pressisreturntothepreviousmenu.
Whenplayingmusic,pressatransferbutton switch a play mode. The playing modes include single
play,randomplay,sequentialplay,single cycle and list loop. Single player: after playing this song
willautostop;randomplayback:random play all the songs, do not stop. Circle playing; the order of
play:playallthesongsfromtop to bottom, the player stop after the last song; Single cycle: always
repeatthesamesong,donotstop;Cycle:repeat the order of play all songs, play the last song again
fromthefirsttothelasttocirculattheorderofplay.
istopauseandpopuppictureinformationatalongtime,The picture information includes shooting
time,file size, storage location and image size. After pressing again, thekeywillbecomeamanual
play,and the next picture is played. Press is returned to the list of pictures.
Note: The next picture is played automaticallywhenthepictureisplayed,unlessyouchangeittoa
manual play.
Inthe“Media”menupressup ordown button to movethe cursor down to the “picture” option. Press
the button to enter the picture list, press or to move the cursor, select the picture you
want to play, and confirm the play by pressing setting button once. In the picture, keep pressing
8.2 Photo ( for the models with SD card )
Note: Photo folder contains only photo files in SD card.
InSDcard,aseparatefolderiscalled“user”.Thereisafoldercalled“picture”intheuser.
Itcanbefoundanddisplayedonlywhenthepictureissavedinthefilenamed“picture”.
157 168
Entermanagersystem,therewillshowtwofile“DCIM”“USER”.
8.3 File Manager ( suit for support SD card device )
manager system
USER
DCIM
ring
[Delete file]:
[DCIM Folder]:
[USER Folder]:
[Upgrade]:
[MCUUpgrade]:
Press“+”or“-”choosethe file you want delete, long time set key show tip“delete file?”
DCIMfileissystemautobuiltupandkeeprecordfolder, insidehavephotofile
andvideofile.Photofoldersavemonitorautosnapshotandmanualcapturepictures;
Videofoldersavemonitorautorecordormanualrecordvideos.
USERfolder included“music,photo,ring,update”folder.
Musicfoldersavemediamusic.
Photofoldersavedigitalphotoframepictures.
Ringfoldersavedefaultringtone.
Updatefoldersaveupgradefile.
MoveFW(xxx.dd)underupdatefolder,chooseupgradefilenameas”xxx.dd”,press
setkeysystemdisplay“update”choose“Yes”andwaitupgradingtillsuccess.
Notice:Duringsystemupgrading,notallowmoveoutSDcardorcutoffpower.Onlywaitupgrade
successdevicewillautoreboot.
copyMCUfile(xxx.bin)toupdatefilefolder,selectMCUfile(xxx.bin)andconfirm
“updateornot”.
17
“On main menu, move the cursor totheoptionRecord”,thenpresstoenterthe“Record”menu.
Options include “Video”, “Picture” and “Return” (for the models with SD card )
9. Record
On“Record”menupressthebutton or upward or downward to move the cursor to the
option“Video files”, press the button toenterthe“Videofileslist”.pressthebuttonor
upwardordownwardtomove thecursorto select file to playback, a black list indicates that the
list hasbeenselected,pressthebuttontoplayback.Duringplaybackpress the button
to exit the currentmenu.
9.1 Video ( for the models with SD card )
Note: Video folder contains only the video file recorded by the outdoor station.
On“Record”menuscrollthebutton or upward or downward to move the cursor to the
option“Picture files”, press the button toenterthe“Picuterfileslist”.Scrollthebuttonor
upwardordownwardtomove thecursorto select file to playback, a black list indicates that
the list hasbeenselected,pressthebuttontoplayback.Duringplaybackpress the button
to exit the currentmenu.
9.2 Picture ( for the models with SD card )
19 20
The file of the photo or video is stored in the “DCIM” folder that the systemautomatically generates.
Note: Picture folder contains only picture file taken by the outdoor station.
Inmonitoring,calling,intercom,alarmandothermodes,clickthetransferbuttontoactivatethe
coloradjustment,includingvolume,brightness,contrast,saturation,refreshandreturn.
10. Set the color parameters
valuescanbesetupfrom0to50,defaultas25.
valuescanbesetupfrom0to50,defaultas25.
[Bright]:
[Contrast]:
valuescanbesetupfrom0to50,defaultas25.
[Volume]:
[Refresh]:
[Saturation]:
Adjustthevoiceofthecalloftheindoormonitor.
door1
Note:Thevolumeregulationhereisthevolumeofthecall.
05 25 25 25
Terminal and GND is shorted, the alarm is activate, the speaker of the indoor unit rings and continues
120s,duringthistime,clicktostopalarmingandenterthestandbymode.
ALARM INSTRUCTIONS
ForthemodelswithSDcard,simultaneously,triggers recording or snapshotting (relatedtothe
systemsettings).The recording time is 120s, during this time, clicktostopalarmingandenter
thestandbymode.
Beapplicabletoconnect2normallyclosed(NC)ornormallyopen(NO)alarminputs.
2camerachannelsofalarm input without limitations on input type(caneitherbethenormally
opentypeorthenormallyclosedtype).
ALMterminalofthealarmdetectoris connected in parallel with the ALM terminal (Thealarm
detectorshallbesuppliedbyexternalpowersupply).
Groundterminalofthealarmdetectorisconnected in parallel withtheGNDterminalofthe
camera.
ForNOalarminputs,whentheGNDandALM are in the connection state,itwilltriggerthe
alarm.
Connection diagram:
ForNCalarminputs,whentheGNDandALMareinthedisconnectstate,itwilltriggerthe
alarm.Itappliestoanyalarmsensor.
Pleasebefarfromthedeviceswithintenseradiation:
TV,DVR,etc.
Donotdisassembleprivatelytoavoidtheelectricshock.
Donotdrop,shakeorknockthedevice,otherwisewill
damagetheelements.
Keepatadistanceofmorethan30cmwithACpowertoavoidinterference.
Awayfromthewater,magneticfieldandchemicals.
Pleasepowerdownbeforeinstallation.
Choosethebestpositiontoinstall,thehorizontalviewis
150cm.
Note:
INSTALL THE INDOOR UNIT
How to install the indoor unit
plastic stent
cables
21 22
ProductType AHD720P/960P/CVBSVideoInput,CVIVideoInput,TVIVideoInput
Monitor
Resolution 7″(1024*600)
7″TFTLCD
Standard PAL/NTSC
CallingMode Duplex/cloundintercom
SPECIFICATION
PowerConsumption Maximum500mA/600mA
ExternalpowerDC12V;BuiltinpowerAC100-240V
2GB~32GBclass10TFminicard(write/readspeed≥Class10)
Surfacemounting
Power supply
WorkTemperature
InstallationWay
SDCardMaxCapacity
0~+50℃
MotionDetection
System
Yes
InputVideoSignal CVBS,CVI,TVI,AHD2.0
Function Unlocking/Monitoring/Intercom/TransferCall/Videorecording/APPmonitoring
Support6indoormonitor+2callpanel+2camera
Advantage Digitalphotoframe/MP3/Clock&message/Backgroundmusic/cloudintercom
(Optional)
ACCESSORIES
Indoor unit 1pcs
1pcs
1pcs
5pcs
1pcsor2pcs
4pcs
4pcs
Plastic Anchors
Screws
Bracket
4 Pin line
2 Pin line (optional, please take actualmodel as quasi)
Usermanual
—————————–
—————————————————————————–
————————————————————————
——————————————————————————–
——————————————————————————–
——————————————————————————-
—————————————————————————
Indoor unit
If the indoor unit includes the internal power supply, there is no external power supply switch of the
picture on the above.
External power supply switch (optional) ————————————————— 1pcs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>