LOOKI Network Intelligent PTZ Camera User Manual

LOOKI Network Intelligent PTZ Camera Included In The Pack

Included In The Pack

Product Structure – Front

RESET:
Press “Reset” or use reset pin to press and hold for about 3-5 seconds to restore factory default. TF card slot: Supports TF card up to 128GB. Please format the TF card in the “Lookilife” APP before first time use.

Product Structure – Back

Download The App

Scan the QR code below or search for “Lookilife” in your Google Play Store or App Store to download the app, then install.

Log in:
Select “Log In”, then choose your country and enter your log in details to log in.

Register:
If you don’t have an account already, select “REGISTER” then follow the on- screen prompts to create an account with your email.

Add Camera

Preparation

1.  Make sure your phone is connected to a 2.4GHz Wi-Fi network and the signal strength is strong. The camera does not support 5GHz Wi-Fi.
2.  Long press the “reset” button for 3-5 seconds until the device makes a beep sound, wait for the camera to restart then add camera.
3. Open the LookiLife app on your mobile phone, enter your login details and click “Add Device” or “+” icon in the upper right corner of the screen. Select “Security”, then click “Smart Camera” to enter the camera list interface.

Scan QR Code to add camera

Add device by QR Code
Select “QR Code” from the options, click “Next”, then input the Wi-Fi password your phone is connected to and click “Next”. The app will generate a QR Code, place the camera lens about 15-20cm from the screen to scan the code. Wait for the camerato make a “ding ding” sound, then click “I hear a prompt”, the app will automatically search and connect to the camera.

Add device by QR Code

Select “QR Code” from the options, click “Next”, then input the Wi-Fi password your phone is connected to and click “Next”. The app will generate a QR Code, place the camera lens about 15-20cm from the screen to scan the code. Wait for the camera to make a “ding ding” sound, then click “I hear a prompt”, the app will automatically search and connect to the camera.

Function Introduction

1. Camera name
2.  Sound of the device
3.  Definition of the Picture
4.  Screenshot
5.  Speak
6.  Playback
7.  Settings
8.  Signal strength
9.  Full screen preview
10.  Recording
11.  Direction
12.  Cloud storage

FAQs

1. Q: Failed to add camera during network configuration.
   A: Please make sure your phone is connected to a router with 2.4GHz band and the Wi-Fi password is correct.

2. Q: After scanning QR code, adding is still unsuccessful.
   A: Restart the camera or power off after scanning was unsuccessful, then try to add it again.

3. Q: The device cannot preview normally.
   A: Check if the network signal is too weak, if yes, put the camera close to the router. If it still cannot preview, reset the camera and add it again.

4. After resetting the device, why is the camera still in the device list?
   A: Resetting the device only resets the camera’s network configuration, not the App configuration. You must log into the App to delete the camera.

5. Q: How to switch the camera network to another router?
   A: Firstly remove and reset the device on the App, then configure the new network for the device again through the app.

6. Q: The device does not recognize the TF card.
   A: Please power off the device and remove the TF card, then insert again correctly. Check if the TF card is working normally and whether it is in FAT32 format. Note: When the network is unstable, the app might prompt that the TF card cannot be recognized

Warranty

Dear customer,Thank you for choosing our product. Please read the following terms carefully before installing the product.The device is warrantied against defect for one year from the original date of purchase. Within the warranty period, any defect that arises under normal use will be maintained by our company free of charge. The warranty does not cover: The warranty does not cover:

•  Any faults or defects caused by improper operating environment or operation.
•  Any faults or defects caused by improper installation, misuse, unauthorized maintenance, modification, accident, force major event or other external factors.
•  Any faults or defects caused by using the product, software or component of a third party.
•  The warranty period has elapsed.
•  The product bar code cannot be identified or is mismatched.
•  Any faults or damage not arising from the design, technology, manufacturing and quality problems of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>