Bunfly PC-S1 Pet Clipper Grooming Kit User Manual
- June 14, 2024
- Bunfly
Table of Contents
Bunfly PC-S1 Pet Clipper Grooming Kit
Product Information
Specifications
- Product Name: Pet Hair Trimmer
- Model: PC-S1
Product Usage Instructions
Safety Precautions
- Please keep the dust cup and sponge filter clean to prevent failure and accidents.
- Ensure to turn off and unplug the trimmer before performing maintenance to avoid accidents or dangers.
- If the temperature of the product rises abnormally, stop the operation immediately and let it cool down.
- Make sure all filters are properly installed before using the trimmer to prevent failure.
- Pay attention to the sharp blades and angles of accessories to prevent cuts.
- Note: The hose has a conductive function. Do not use it to suck water or immerse it in water for cleaning. Regularly check the hose for damage and remove the plug from the socket before cleaning or maintenance.
Product Introduction
- Host Vacuum Cleaner: 1 unit
- Pet Hair Trimmer PC-S1: 1 unit
- User Manual: 1 unit
- Slicker Combo Grooming Combo
- Trimmer
- 2 in 1 Flat Brush Pet Hair Roller Brush
- Massage Brush
- HEPA Filter
- Sponge Filter
- Hose
- Note: If any accessories are missing, please contact our after-sales service.
Product Usage Explanation
Preparation:
- Gently install the dust cup according to the direction of the arrow and remove it in the opposite direction.
- Press the button to connect the hose to the host and accessories.
- Pay attention to the blade and sharp angles of accessories to prevent cuts.
Use of the Equipment
Functional Description:
- The blue light is displayed when the device is plugged in, and other lights are off.
- Touch the power button to start in low gear. The wind speed key will light up with white light and display “blue 01” digitally.
- Touch the wind speed button to display “blue 02”.
- Touch the wind speed button again to display “blue 03”. This cycle repeats after touching it three times.
- Touch the power button to shut down the system. The system displays the standby state as “–“.
Error Code:
Fault Reason | Repair Measure |
---|---|
Trimmer loose contact | Turn off the machine, reconnect the trimmer, ensure the |
trimmer
power switch is turned off (ON/OFF), then restart the machine.
Trimmer hair blocking| Clean the hair according to the video guidance.
FAQ
- Q: Can I use the trimmer to cut wet hair?
- A: No, the trimmer is not suitable for cutting wet hair. Please ensure the hair is dry before using the trimmer.
- Q: How often should I clean the dust cup and sponge filter?
- A: It is recommended to clean the dust cup and sponge filter regularly to maintain optimal performance. The frequency of cleaning may vary depending on usage, but a general guideline is to clean it every 1-2 weeks.
- Q: Can I use the trimmer on other animals besides pets?
- A: The trimmer is specifically designed for pet hair trimming.
It is not recommended to use it on other animals.
Safety precautions
-
This machine is only used for home condition, the comercial and industry condition is not available, and please also don’t use it outdoors and wet place;
-
Never let children or people with weak physical or thinking ability use this product alone;
-
Please use it in a safe condition and under the instruction and supervision of someone who understands the safe way of using the product and the dangers. Otherwise, never let children use it alone;
-
Pls be careful when using near the children and pets;
-
Pls don’t allow children and pets play with this product;
-
Pls don’t touch the plug and body with wet hand, and also don’t suck the wet hair and liquid;
-
Pls don’t use this product when the power cord or plug damaged;
-
The product does not work properly, broken, left outdoors for a long time or soaked in liquid so on, in any one of the above cases, please be sure to contact our company;
-
Please do not disassemble this product, the wrong way of assembly may lead to electric shock or fire, please contact our company if you need to repair it;
-
Do not suck flammable or combustible liquids such as gasoline. In addition, please do not use this product in or near the environment with flammable and combustible gases;
-
Please do not pull the power cord, do not put heavy objects on the top of the machine, and do not let the door clamp the powercord;
-
Please do not suck cigarettes, matches, hot soot and other burning, smoking, hot things;
-
Pls don’t put anything into air inlet or plug the air inlet;
-
After use, then maintaining or replacing parts, pls be sure that the plug has already be pulled out;
-
Pls don’t store this product in outdoor, bathroom, or other wet place;
-
Please do not use product with aromatics and fragrances as filters, such chemicals may cause fire;
-
If the power cord is damaged, it must be replaced by a professional person from the manufacturer’s maintenance department or relevant department to avoid dangers.
-
Pls don’t operate or pull out its plug with wet hand
In case of failure and electric shock, please absolutely prohibit. -
Pls don’t suck the flammable or highly flammable things such as Sigarette
-
Pls don’t use it in a place with flammable liquid
It is possible to lead to fire and explosion, so please don’t suck the highly flammable liquid and flammable things. -
There maybe has smell for fist time use, but it won’t be harmful for body
When you use this product for the first time, it will have a smell, but it will disappear after a while. Please understand. If the burning smell persists, stop using it immediately! -
Please keep the dust cup and sponge filter cleaning for a long time
It can be the cause of the failure and lead to accident if the dust cup and sponge fiter be dirty. -
Please be sure toturn off and pull plug out when maintenance
It maybe cause the accidents or dangers if you maintain the product when turning on. -
If the temperature of this product rises abnormally, please stop the operation and use immediately
If the motor appears abnormal heating, please stop the all operation immediately, if the air inplet is blocked, please stop the operation in time, take out the dust cup, clean the sponge filter, after 30 minutes to turn on. -
Please be sure all filters istalled before using
The filters must be installed before using, otherwise it will be a cause of the failure. -
Please pay attention to the sharp blade to prevent the cuts
Due to the functions needed, parts of accessories such as slicker combo and trimmer which have the blade and sharp right angles, have to use carefully.
Note: The hose has the conductive function
- It is not available for sucking water or immersing in water to clean;
- Please check the hose regularly, stop using it if it is damaged;
- Before cleaning or maintenance, please be sure to remove the plug from the socket.
Product introduction
Host
Accessories
Note: If you find any accessories lacked, please contact our after-sales svervice in time.
Useing explaination
Preparation
Please gently intalling the dust cup accroding to direction of arrow, taking
out inopposite direction.
The hose connect the host and accessories
Due to the functions needed, please pay attention to the blade and sharp right
angles of accessories to prevent cuts;
Use the equipment
Functional description
- Blue “–” is displayed when the device is plugged in, and other lights are not on;
- Touch the turn on key to start in low gear, and the wind speed key will light up white light and display blue “01” digitally;
- Touch the wind speed button to display blue “02”;
- Touch the wind speed button to display blue “03”. 01-02-03 cycle repeated after touching 3 times;
- Touch the power button and the system shuts down. The system displays the standby state as”–” .
Error code | Fault reason | Repair measure |
---|
ER
| Trimmer loose contact| Turn off the machine first,recontact the trimmer, keep the trimmer power switch is turned off(ON/OFF) ,
then restart the machine
Trimmer hair blocking| Pls clean the hair according to the video guidance
Use of Accessories
Wire comb
It cleans your pet’s floating hair, Old hair and all the junk in it, same When
rational hair function, make hair more And fluffy.
The blade comb
You can trim your pet’s excessive-ly long hair Cut, achieve beauty effect.
Note:
Remember to pay attention to the edge and sharpness when using Position, do
not cause excessive force skin.
buzzer
Shave your pet’s hair and inhale it, No residue, no hair flying around. Note:
Please be careful on soft parts of pet skin.
Don’t use too much force and cut your skin.
Note: During use, do not aim the suction head at the face of the pet.
Daily maintenance
Clean the dust cup
- Remove the dust cup Remove the dust cup by lifting it slightly in the direction of the arrow.
- Open the cover and pour out Push the clasp to open the dust cup and pour out the dander.
- Place the dust cup Install the dust cup in the direction of the arrow.
Note: When taking the dust cup, take care to put gently; If the dust cup is cleaned after dumping the dust, remember to wait for the dust cup.Install after drying to prevent electric shock or machine damage caused by water entering the motor.
Electric push-shear cleaning
- Please adjust the adjusting button to the bottom before installing the knife.
- Remove residual impurities from the suction port.
- Add lubricant to the tool head.
Filter sponge and HEPA cleaning
- Remove the dust cup.
- Remove filter sponge and HEPA.
- Rinse with running water and drain.
- Place in a well-ventilated place to dry for at least 24 hours.
- Install the filter sponge and HEPA in the same place after it is completely dry. Make sure the filter sponge and HEPA are installed properly.
Note:
- Rinse the filter sponge with cold water at least every other month;
- Please according to the frequency and condition of use, maintenance period is also different, regular confirmation if dirty cleaning;
- When cleaning, be sure to cut off the power, plug removed from the socket;
- Be sure to install the filter sponge after drying, as not drying the filter sponge can lead to electric shock and failure
Product specification
Power | 350 W |
---|---|
length of the hose | 1.6 m |
The dust cup volume | 3 L |
The fuselage size | 340140240 mm |
The power cord length | 2.5 m |
Fuselage net weight | 2 kg |
Maximum noise | 75 dBA |
Warranty
- The warranty period shall be 12 months from the date of product receipt.
- If damaged or faulty during normal use, it will be repaired free of charge during the warranty period. If you can’t proceed.Replacement products will be provided after repair.
- The warranty period for free replacement shall be subject to the warranty period before the exchange. (from original purchase date)
- If you have questions or need repairs, please contact for after-sale.
- The provisions of this product are subject to change without prior notice, and the Company reserves the right to update the warranty contents when necessary
All repairs and requirements will be handled in accordance with the latest warranty terms.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>