LOOKI 360Pro Outdoor Security Camera User Manual
- June 5, 2024
- LOOKI
Table of Contents
- LOOKI 360Pro Outdoor Security Camera
- Productinformatie
- Basic Parameters
- Install APP
- Add The Device-Scan QR code mode
- Add The Device-AP Mode
- Other connection methods
- Matters Need Attention
- The names of the harmful substances In the product
- The Story
- Contact
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LOOKI 360Pro Outdoor Security Camera
Productinformatie
lnbegrepen in hat pakkat
- Manual
- USB Power Cord
- Power Adapter
- Smart Camera
- Screw Accessories
Package *1 Instruction for installation
Basic Parameters
- Product Name: Looki 360° Pro Camera
- Pixel: 2.0MP
- Video Compression: H .264 High Profile
- Image Enhancement: Digital Wide Dynamic 3D Noise
- Reduction Local Storage: Micro TF card
- Wireless Encryption: WEPIWPAWPA2 Encryption
- Power Input: 5 V 1A (Min)
- Total Power Consumption: 5W (Max)
- Wireless Standard: 2.4G 802.11 b/g/n
- Support Platform: AndroidliOs
Component Description:
- Reset Button: Press and hold “reset” hole for 6 seconds to reset the device.
- It is recommended to insert 8-128 GB high-speed Micro TF card, otherwise the device will not be able to store, view historical video and support Important functions such as firmware upgrading.
Install APP
Download APP: scan the QR code below to download and install. Register and login: open the ” LookiLife ” APP to register and login according to the prompts
Add The Device-Scan QR code mode
- Make sure Wi-Fi is available and connected to the Internet.
- Connect the camera to the power, then system startup is completed.
- Open the “LookiLife ” APP, press the’+ in the upper right corner or the main screen (Figure 01); choose “Security &Video Surveillance”, click “Smart Camera” (Figure 02) to add camera; and then click “Next step” (Figure 03);
Please note that only 2.4 GH Wi-Fi network is supported;
- If the mobile phone is not connected to Wi-Fi, please click “Connect to Wi-Fi” (Figure 04);
- It will jump to the WLAN interface and connects Wi-Fi (Figure 05).
- f the phone is connected to Wi-Fi (Figure 06);
- A QR code will prompt on your screen and you need to scan it with 1 Smart Camera. (the camera is about 20-30 cm away from the mobile phone lens). Then click “I Heard a Prompt” (Figure. 07.)
- “connecting” (Figure. 08);
- connection completed(Figure 09), and click “Done”;
- Then jump to preview interface (Figure 10)
- After closing the device preview interface, the interface returns to the APP home page. At this time, the connected device will appear on the APP home page (Figure 11). Then you can click directly to the device interface to see the monitoring situation without re-adding afterwards.
Add The Device-AP Mode
First set the machine to the hot spot distribution network mode
- Locate the RESET button on the machine and press it for about 1 second, After about 1 minute, the sound will ring and the hotspot will start successfully.
- Select “AP Mode” (Figure 12)
- Click Next (Figure 13)
- Enter the account and password that can connect to WIFI (Figure 14)
- Click “Go Connect” (Figure 15)
- Go to “LookiLife -XXXX “and click Connect (Figure 16)
- Connecting (Figure 17)
- Click to complete the connection (Figure 18)
- Video screen (Picture 19)
Other connection methods
QR Code
Camera aiming at QR code
AP Mode
Mobile phone search machine signal code
EZ Mode
Mobile APP–wifi–search machine
Cable
Ethernet cable connection
Matters Need Attention
Try to keep away from the metal space; Avoid the furniture , microwave oven blocked; Avoid the space where the audio, video and data lines are wound, and keep the space away from them as large as possible; Ensure that as close as possible to the coverage of wireless Wi-Fi signals. Switching network environment; In the new network environment, please press the reset hole about 5 seconds, then connect to the network.
The names of the harmful substances In the product
This product conforms to RoHS environmental protection requirements. At present, there is no alternative technology in the world to replace or reduce the lead content in the electronic ceramics, porcelain, optical glass, steel and copper alloy.
The Story
Without my sister, Looki would not exist. After the burglary in our house, she no langer dared to be home alone. A lot of houses are being broken into nowadays. The feeling of not being able to be safe at home is increasing. One night I told her my idea to sell Smart doorbells and security cameras together with my partner Yves.She thought it was fantastic! Not only because of the convenience, but also the feeling of safety and being able to see from your mobile what is happening around your house. We hope you enjoy Looki as much as we do. We love to hear what your experience is with Looki. Do you have questions? Please ask them Looki & Yves, Founders
Contact
Whatsapp: +31 641779590
E-mail:Info@lookilife.nl