TurboTronics TT-SB35 Stainless Steel Oval Sensor Trash Can User Manual

June 5, 2024
TurboTronics

TurboTronics TT-SB35 Stainless Steel Oval Sensor Trash Can

TurboTronics-TT-SB35-Stainless-Steel-Oval-Sensor-Trash-Can-
product

User Manual

Features:

  • Soft lid opening and closing
  • Extra-wide lid opening accommodates large and bulky items
  • Odor Filter System
  • Air vents at the base ease removal of a full bag
  • Powered by 4 “D” size batteries (not included)

We’re here to help!
If you have any questions or concerns about this product, please contact Customer Support for immediate assistance. You can reach us at zgloblabvba@gm.ail.com Your 100% satisfaction is our #1 goal!

How to Use the Odor Filter

Some models of the Touchless Trash Can are equipped with an Odor Filter Compartment that houses the odor-neutralizing Activated Carbon Odor Filter. One (1) replaceable Odor Filter is pre-installed inside the Odor Filter Compartment. Please follow these instructions.

  1. Turn power switch to OFF mode. Removeand turn lid cover upside down.
  2. Slide Odor Filter Compartment (Fig.1) to the right (Fig.2) to remove.
  3. Remove Activated Carbon Odor Filter from the Compartment.
  4. Remove new Odor Filter pouch from plastic bag (Do NOT cut open the Odor Filter pouch).
  5. Insert new Odor Filter pouch (Fig.3) into the Compartment.
  6. Return the Odor Filter Compartment to Lid Cover (Fig.1) and slide to the left (Fig.2) to lock the Odor Filter Compartment in position. TurboTronics-TT-SB35-Stainless-Steel-Oval-Sensor-Trash-Can-fig5Replace Odor Filter every 3 months or when odor becomes too strong

PARTS

TurboTronics-TT-SB35-Stainless-Steel-Oval-Sensor-Trash-Can-
fig1

Attention

  1. Do not submerge the lid in water as it houses the electronic control. You may clean it with a lightly dampened cloth.
  2. clean the trash can body only with products safe for use on stainless steel.
  3. Do not press or force the Lid Cover to close. Lid will close automatically after your hand is removed from the sensor zone.
  4. Replace batteries immediately when the indication light turns yellow/amber. This will ensure the lid continues to operate properly.
  5. Avoid direct sunlight on the infrared sensor.
  6. Ensure there is enough room to operate the trash can without blocking the opening and closing of the lid.
  7. Do not use a power adaptor that is not authorized by sansor It may result In fire, electric shock or injury
  8. Do not use power adapter and battery at the same time to operate the trash can. It can
  9. only be powered by one source at a time.
  10. Automatic parts may not be suitable for small children or pets.

About your ibin Trash Can

The touchless sensor operation promotes a germ-free environment. The lid sensor uses invisible and harmless, patented infrared technology for accurate and responsive lid open and close operation. There are two buttons on the front of the lid, “OPEN” and “CLOSE”, to open and close the lid manually, and an ON/OFF power switch on the back of the trash can lid. The infrared sensor on the lid will automatically open the lid when your hand or object is within 6 inches/10 cm of the sensor. The lid will remain open if the sensor detects any object within its radius and will automatically close in 4 seconds after the object is withdrawn.
Indicator Light (LED Light)

  1. When there is an object in the Sensor Zone, the LED Indicator Light will remain green and the Lid will remain open until object is removed from the sensor zone.
  2. indicate that the lid will close in 6 seconds.
  3. red, the light will turn solid green again and the Lid will remain.

Contents of the Box

  • Sensor Trash Can Lid
  • Brushed Stainless Steel Can Body
  • Trash Bag Retainer Ring
  • User Manual

Operating Instructions

  1. Remove Lid Unit from the trash can. Open battery compartment cover to insert 4 “D” size batteries. Replace cover.
  2. Insert one 13 gallon to 18 gallon trash bag through Trash Bag Retainer Ring and wrap the top part of the bag over the Ring (STEP 1 in How To Use The Trash Bag Retainer Ring). Put the Ring onto the top edge of the can body (STEP 2).
  3. Place Lid Unit onto the can body and make sure it is securely attached.
  4. Turn on the power switch on the back of Lid Unit . A red Indicator Light will turn on for 3
  5. Place hand or any object 6 inches above Infrared Sensor on the front of Lid Unit to open. When there is an object in the Sensor Zone, the LED Indicator Light will remain green and the Lid will remain open until object is removed from the Sensor Zone. Once item is lid will close in 6 seconds. If an object is placed back into the Sensor Zone when the LED open.
  6. If you press the open button, Lid will open, and remain open for 5 minutes before closing automatically – unless you press the close button. The trash can will then resume operating in automatic mode.

How To Use The Trash Bag Retainer Ring

TurboTronics-TT-SB35-Stainless-Steel-Oval-Sensor-Trash-Can-
fig3

General Troubleshooting Steps

  1. the sensor area with a soft damp cloth and dry it immediately with a soft dry cloth. Re-insert batteries or plug in AC adapter (DO NOT USE battery and AC adapter at the same time).
  2. Place trash can in an open area where nothing is blocking or within 10 inches of the sensor eye. Make sure no sunlight or direct light shines on the sensor. Turn on the power and try opening lid again.
  3. If trash can is still not working correctly, remove the batteries or AC adapter. Let trash can sit for at least 2 hours to reset. Try opening lid after reset.

Troubleshooting

Problem Solution
1. The trash can is brand new, and only works occasionally

doesn’t work regularly, try a new set of batteries. Then follow the General Troubleshooting Steps.

2. The lid stays open or lid opens and closes continuously|

another direction, and follow the General Troubleshooting Steps.

3. Grinding noise when the lid opens/closes| This can be caused by broken gears or lid hinge.

•      Check for damage on the hinges that connect to the lid

•      Follow the General Troubleshooting Steps

4. The lid does not open/close

Important: Do not use batteries and the AC power adapter at the same time. It can only be powered by one source at a time.

| If you are using Batteries:

•     Turn power switch to “ON” position to see if the indication light is visible If you are using AC Power Adapter:

•      Unplug the adapter and insert new alkaline batteries to see if the lid works on battery

•      If the lid works with batteries, the AC adapter may be broken

5. I wave my hand over the sensor eye, but the lid does not open| It is not a motion sensor. Hold your hand or object steadily (do not wave your hand) within 4-6 inches over sensor eye for it to detect and open.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals