Neomounts FL15-750WH1 Tablet Floor Stand Instruction Manual

: June 5, 2024
: Neomounts

Table of Contents

Dimension
PARTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Neomounts FL15-750WH1 Tablet Floor Stand

Dimension

PARTS

STEP 1

Attach the pole to the base

STEP 2

Attach the supporting arms to the base

STEP 3

Attach the adapter plate and holder to the pole

STEP 4

Unlock the holder

STEP 5

Remove the cover and place the tablet in the holder

Attach the panel to the holder using 4 screws (H). Adjust the two claws, before completely tightening the screws, to hold the tablet and to ensure the screen is aligned and visible through the front panel.

The panel number is indicated on the panel itself.

Choose the corresponding panel according to the tablet:
Panel 1: For 9,7” iPad 5/6, iPad Air 1/2 & iPad Pro (Gen 1)
Panel 2: For 10,2” iPad 7/8/9 & 10,5” iPad Air 3, iPad Pro (Gen 2)
Panel 3: For 11” iPad Pro (Gen 3/4/5) & 10,9” iPad Air 4
Panel 4: For 10,4” Samsung Galaxy Tab A7
Panel 5: For 10,1” Samsung Galaxy Tab A
Panel 6: For 10,4” Samsung Galaxy Tab S6

STEP 6

Unlock the power strip compartment

STEP 7

Insert the power strip into the compartment and route the cable

STEP 8

Lock the power strip compartment

STEP 9

Install the mount on a wooden floor

STEP 10

Install the mount on a concrete brick floor

CAUTION

To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature. such as earthquake or typhoon.
It is recommended that the mount be installed by qualified personnel only.
At least two persons are needed to install or remove the product to avoid hazard of falling objects.
Please carefully inspect the area where the mount is to be installed:
• Avoid places that are subject to high temperatures, humidity or contact with water.
– Do not install the product near air conditioning vents or areas with excess dust and fumes.
– O”IY install on vertical walls Md avoid slanted surfaces.
• Do not install in places subject to any shock or vibration.
• Do not install in places subject to direct exposure to bright light as it may cause eye fatigue when viewing the display panel.
Maintain sufficient space around the display to ensure adequate ventilation.
To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
The wall. ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
Since the manufacturer has no way to control the wall. ceiling or floor type and installation of the mount. the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
Please consult the English language manual for any dispute on conditions.