Dongguan GY-Z16 3-in-1 Magnetic Wireless Charger User Manual
- June 5, 2024
- Dongguan
Table of Contents
3 IN 1 MAGNETIC WIRELESS CHARGER
USER MANUAL
Note: To ensure safe and efficient charging of 3 devices, you must use a 9V/2A adapter (Qualcomm Quick Charger 2.0 or 3.0) and fast charging cable (if you don’t use a suitable adapter and fast charging cable, the charger may not be able to charge the phone or may not Charging 3 devices at the same time or may even damage the charger).
MADE IN CHANA
PRODUCT INTRODUCTION
The 3 in 1 Wireless Charger is a multi-function charging station, you can charge 3 smart devices (iPhonel2/13 series, iWatch, and earbuds) on our product at the same time. It is compatible with the iPhone12/13 series, iWatch, AirPods, and most of TWS. It is a unique design with an elegant appearance and is perfect to use at the office or at home. It is very convenient to charge your smart devices on our product, especially for Apple users. There is protection from over-charge and FOD function, you can enjoy your charging experience.
PRODUCT APPEARANCE
HOW TO USE
LED LIGHT INSTRUCTIONS
| Standby mode| Phone charging| FOD
---|---|---|---
LED color| | |
LED light| Greenlight will be on for 30 seconds and then off| The blue light
turns off after 30 seconds of breathing| Blue and green flashing
WIRELESS CHARGING OF MULTIPLE DEVICES
| For Apple | For iOS+Andriod Devices |
|---|---|
| 
DISPOSITIVI SMART COMPATIBILI
-
iPhone iPhone 13,13 Pro,13 Pro Max,13 mini
iPhone 12,12 Pro,12 Pro Max,12 mini
iPhone Leather Wallet with Magnetic
iPhone 13 Series Case with MagSafe
iPhone 12 Series Case with MagSafe -
Apple Watch
Apple Watch Series 7/Series 6 / Series 5/Series 4 / Series 3/Series 2/SE -
Earbuds AirPods
(2nd generation)/AirPods Pro/AirPods (3rd generation) The other Qi enable earbuds
PRODUCT SPECIFICATION
Input: 9V/2A, 12V/1.5A Output(Phone): 15W(Max)/10W/7.5W/5W Output(iWatch):
2.5W(Max) Output(Earbuds): 3.0W(Max)
Input Port: Type-C Conversion Rate: 73%(Phone) Product Size: 141X109X102mm
PACKING LIST
- Magnetic wireless charging X 1
- User manual X 1
- Type-C quick charging cable X 1
FAQ
-
If you’re experiencing interrupted or slow charging, check the following:
(1) The back of your phone should not have any metal, pop sockets, or credit cards.
(2) Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
(3) Phone cases should be no thicker than 5 mm for effective charging.
(4) Check whether the adapter is QC 3.0 fast charger. -
If you’re failing to charge your device, please try out the following:
(1) Please restart your cell phone and test with another Type-C charging cable.
(2) Please check whether the indicator turns on or not.
(3) Please check whether the Adapter is QC3.0 Quick Charger (Output:9V/2A) or not, iPhone original adapter does not match the wireless charger.
(4) Please check your Phone case thickness(<=5mm). A metal ring or Magnetic Pad will not be available. -
If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try this:
(1) Replacing the cable connecting your wireless charger.
(2) Rebooting your phone.
(3) Unplug the adapter and reinsert. -
If the LED light flashes and the wireless charging stand cannot charge your device, how can I deal with this problem?
1. Before using this wireless iPhone charger, please make sure that your device supports Qi wireless charging function.
2. Check whether the 3.0 adapter is used for charging.
3. Check whether there are metal foreign matters in the shell of your equipment. Magnetic and metal accessories will flash the LED and prevent charging. -
Charging slow.
Charging efficiency depends on the receiving power of your devices, and do not keep those apps keep running during charging. -
The phone is charging intermittently, or the indicator light flashes.
If the charging current is not enough, please use an adapter with sufficient power of 9V/2A or 12V/2A above. -
Charging fever.
It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the wireless charger is too hot, please take your phone off it, when the wireless charger is cooled down, please charge it again. -
The charger does not work. Do not put metal debris or magnetic cards on the charging area. If the product does not work due to overheating. please take off the phone and charge it again when it is cooled down.
-
For iPhone 13 / 12 series phone can not be charging? (1). If you are using iPhone 13 / 12 series, but you can’t charge it, please try restarting your phone and charging again. (2). If your iPhone cannot be charged, it may be due to the IOS Version. Please try restarting your phone to solve this problem.
-
If there are other problems, please contact our after-sales for a solution.
TIPS
- This 3-in-1 wireless charging station only supports Apple watch S7/SE/S6/S5/S4/S3/S2. ( Note: Apple watch series 1 is not supported).
- Do not charge the charging station of Apple products from the computer USB interface or other power converters.
- When charging, place the Qi-enabled device in the center of each wireless charging area.
- Make sure your device is in the middle of the cordless charger area.
- The silicone shell of iWatch and AirPods may cause abnormal charging. It is best to take it off before charging.
WARNING
- Avoid using the product in places that are wet, humid, or have a high temperature.
- Avoid dropping the product from high places.
- Do not disassemble the product by yourselves. Please contact us if necessary.
- Do not clean the product unless the unit is powered off.
- It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time.
All product brands and trademarks are the property of their respective owners.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>