Sarent

Bluetooth Headphones, Wireless in-Ear Earbuds Stereo

Specifications

• WATERPROOF RATE: IPX7
• OPERATING RANGE: Up to 33 feet/10 meters (No obstacle between)
• STANDBY TIME: 180 Days
• CHARGING TIME: 1-2 Hours via Micro-USB cable
• TALK/PLAYING TIME: about 2-3 hrs.
• BATTERY CAPACITY: 350mAh/3.7V, Rechargeable Lithium-Ion
• EARPHONE TYPE: In-Ear
• BLUETOOTH STANDARD: V5.0
• MICROPHONE: Built-in
• NOISE REDUCTION: CVC6.0

Introduction

It has Digital Noise Canceling Technology, Unrivaled Audio Experience with Bluetooth V5.0 Plus EDR (Wireless Bluetooth). Its Sound Quality Upgraded to Bluetooth 5.0 Stereo with Deep Bass. It has a constable connection – Never disconnect while using. Its battery life is extended up to 100 hours. For phone calls, both earbuds are supported. Clear Call with Dual Noise Reduction Technology. It is Compatible Hardware for All Bluetooth-enabled devices (All iOS and Android Devices)

HOW TO GET BOTH WIRELESS EARBUDS TO WORK AT THE SAME TIME

The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair.

1. Push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear).
2. Open Bluetooth on your phone and search for tws-k2, then select one of them to pair.

HOW TO CONNECT BLUETOOTH HEADPHONES TO AN ANDROID PHONE

• To begin, go to Settings…
• Then select Connections.
• Then select Bluetooth…
• Then, in the top-right corner of your screen, tap Scan.
• Then, on your headphones, hit and hold the power button.
• Finally, locate and tap your headphones.

HOW TO BOOST EARPHONES SOUND

• Examine your earphones’ volume.
• Most inexpensive earbuds have low loudness levels.
• Use a higher-quality music streaming service.
• Use Developer settings.
• Use 3rd Party Applications to Boost Loudness.
• use DAC (Digital-to-Analogue Converter)

Frequently Asked Questions

• When my earbuds are fully charged, how do I know?
  Examine the earphones’ battery indicator light to determine their state. The case can be charged without the earbuds; when they are inserted, both the earbuds and the case will charge at the same time. Charged in red. Fully charged: green

• Why are my wireless earbuds only working on one side?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• How can I connect my earbuds to one another?
  Remove the left and right earphones from the case and push and hold the touch control area for 3 seconds or until a white LED light flashes on both earbuds. Long pressing both the left and right earbuds at the same time is critical.

• Why won’t my Bluetooth connect?
  Go to Settings > System > Advanced> Reset Options > Reset Wi-Fi, Mobile, and Bluetooth on an Android phone. To unpair all of your devices on iOS and iPadOS, go to Settings > Bluetooth, tap the info icon, then select Forget This Device for each device, then restart your phone or tablet.

• My Bluetooth headphones aren’t connecting to my phone?
  If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues.

• On Bluetooth headphones, where is the power button?
  You’re referring to the middle of the “three.” It’s fantastic because everything is on the same side. If you want to connect to your phone, the center button also serves as an “answer and hang-up” button.

• How can I make a Bluetooth device link automatically?
  Allow Network Settings under Android–> Restrictions. Allow the ‘Force Bluetooth’ and ‘Force Wi-Fi’ options to be enabled to prohibit users from turning off Bluetooth and Wi-Fi, respectively. Please remember to preserve the policy and associate targets.

• Why aren’t my earbuds communicating with one another?
  Turn off your device’s Bluetooth option. Remove the earbuds from the casing and they will automatically turn on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time.

• Is there volume control on earbuds?
  The Headphones Connect app, which comes with earbuds, allows you to adjust the purpose of the control buttons, manage the volume, activate ANC, and Ambient Aware Mode, and use the equalizer on both Android and iOS. NFC quick pairing is also supported by the buds.

• What is the reason for the low Bluetooth volume?
  The software constraints on volume output on Android, Apple, and Windows devices are a typical reason for Bluetooth headphones being so quiet. To safeguard its users’ hearing, these software caps limit the decibel output that your headphones can produce.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>