RW 201-EBT-20B Spring Suspension Digital Load Scale Installation Guide
- June 3, 2024
- RW
Table of Contents
RW 201-EBT-20B Spring Suspension Digital Load Scale
This installation overview is not a substitute for reading the product manuals
WHAT’S INCLUDED
- 1 x 201-217-30 – Gauge and mounting bracket
- 2 x 218-SK – Weld strain sensor installation kit
SENSOR CONFIGURATION
The gauge should be set to detect 2 Spring Sensors. See Spring Suspension Gauge manual for more information on how to set the sensor configuration.
APPLICATIONS
Trailer Axle Group: Tandem Axle
Sensor Location
The gauge should be mounted and installed on the trailer and the strain
sensors should be mounted on the top, center of each trailer axle with sensor
“A” mounted on the front axle. See 218-SK manual for more information on how
to install the strain sensors.
Mode:
Set the gauge to Average (AVG) mode to see a single weight for the axle group.
Set the gauge to Independent (IDP) mode to see separate weights for each axle.
See Spring Suspension Gauge manual for information on how to set the mode.
CONTACT US!
Right Weigh, Inc.888-818-2058 www.rwls.com support@rwls.com
Follow Us!
Scan here to see additional resources on our website including full installation manuals, quick set up guides, and video tutorials!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>