Sarent

True Wireless Earbuds with LED Display Charging Case, Bluetooth

Headphones

Specifications

• BRAND : Sargent
• COLOR : Black
• ASSEMBLED PRODUCT DIMENSIONS (L X W X H) : 3.95 x 3.95 x 1.85 Inches
• BLUETOOTH V: 5.0, CVC: 6.0
• WATERPROOF: IPX5
• BATTERY CAPACITY: 300mAh
• CALL TIME: 5 hours
• LISTENING TIME: 4 hours
• COMPATIBLE FOR: iPhone, Samsung Galaxy S9, S9 Plus, S8, S8 Plus, S7, Note 8, Note 7, Google Pixel, Blackberry, LG, Motorola, Huawei, Mi, iPad, and Android Pad

Introduction

They are True Wireless Earbuds. With Bluetooth V 5.0 and CVC 6.0 noise cancellation technology, our true wireless earbuds deliver outstanding sound quality. They have Most Consistent Signal Quality. With an innovative antenna design and a total of 2500 tests, you won’t have to worry about cut in and out. IPX5 waterproof protection, anti-drop out design, and comfort fit. Binaural phone calls are supported, and HiFi Stereo Sound is provided. Enjoy more happiness with your liked and loved ones by using multiple modes of individual/share usage.

They have Excellent Playing Time. The charging case has a built-in 300mAh battery, so you don’t have to worry about running out of juice. They are Excellent On a single charge; you get 5 hours of talk time and 4 hours of listening time. They contain New Charging Compartment for Mini LED Displays. The supplied charging case for the J3 Pro is small yet robust, and it will fit in any purse or jacket pocket when you’re on the go. The exterior LED display will show you how much power you have left till your next charge. Take it with you on your commute, workout, or cross-country trip.

HOW TO TURN OFF/ON TRUE WIRELESS EARBUDS

1. To switch off the earphones, place them in the charging case.
2. Press and hold the multi-function button on the right earbud, or the Volume down button on the left earbud, until the LED flashes green (on) or red (off) to turn the individual earbuds on or off (off).

HOW TO RESET

The standard technique for resetting earbuds like these is to 1) place the earbuds in the charging case with the lid open, and 2) press and hold the charging case’s button for 10+ seconds; you should then see a change in the charging case’s indicator light, indicating a successful reset.

HOW TO CHARGE

• If the earphones are correctly inserted into the charging case, the charging case will begin to charge automatically.
• While charging, the earphones’ indicator light will become RED.
• When the earbuds are fully charged, the indication light on the earphones will switch off.

Frequently Asked Questions

• How can I connect my true wireless earbuds?
  To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time. The left earbud’s LED will blink Red/Blue when the earphones are synced, indicating that it is in pairing mode. In the charging case, replace the earbuds.

• My headphones are only playing in one ear?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• What’s the best way to pair left and right earbuds?
  Remove the left and right earphones from the case and push and hold the touch control area for 3 seconds or until a white LED light flashes on both earbuds. Long pressing both the left and right earbuds at the same time is critical.

• On wireless earbuds, where is the power button?
  Place the earphones in the charging case and push the power button on the front of the case to charge them.

• What is the best way to adjust the volume on my true wireless earbuds?
  The tune is controlled through the right earbud buttons. The music is repeated by pressing the upper button on the right earphone. A new song is selected by pressing the lower button on the right earpiece. However, pressing and holding the upper and lower buttons on the right earpiece only increased and decreased the volume.

• Should I keep my earbuds on all the time just in case?
  Lithium-ion batteries are used in almost all wireless earbuds, and they are engineered to stop charging once they are fully charged. Your earphones will be protected from harsh temperatures, moisture, and even dust if you keep them in the case.

• Why aren’t my wireless earbuds connecting?
  Step 1: Double-press the power keys on both sides to reset the headphones while they are charging (the white LED indication on the earphones is on). Remove both headphones from the charging case, and they will automatically turn on and connect within 60 seconds.

• Why aren’t my earbuds working?
  It’s unlikely that your Bluetooth headphones are defective. It only needs to be reset. In fact, a quick factory reset can cure a variety of problems with a Bluetooth headset, including If your Bluetooth headset won’t connect to your smartphone or laptop.

• How long does it take to charge TWS earbuds?
  Both the headphones and the charging case have a wide range of charging times. It takes about 1-2 hours for headphones to fully recharge within their case, and the case takes less than an hour. This can be as little as 30 minutes if the charging case in question supports USB-C.

• In case, how do wireless earbuds charge?
  Connect the charging case to a USB power source or an approved wall charger. The earphones and charging case take around 2 hours to charge completely. Charge times may be longer with non-certified chargers.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>