REXING V3 Plus Front and Cabin Dash Cam User Guide
- June 5, 2024
- Rexing
Table of Contents
REXING V3 Plus Front and Cabin Dash Cam
Overview
Thank you for choosing REXING! We hope you love your new product as much as we
do. If you need assistance, or have any suggestions to improve it, please
contact us. You can reach us via care@rexingusa.com or
call us at 203-800-4466. Our support
team will respond you as soon as possible.
Always a surprise in Rexing. Check us out here.
https://www.facebook.com/rexingusa/
https://www.instagram.com/rexingdashcam/
https://www.rexingusa.com/support/registration/
What’s in the Box
- V3 Quick Start Guide
- Safety Guide
- USB Cable
- 3M Adhesive Mount
- Cable Adhesive Spacer
- Cable Management Tool
- Rexing V3 Dashboard Camera
- Car Power Connector (12ft)
Camera Overview
- 4 IR Lights
- Power Button / Screen Toggle Button
- Menu Button / Mode Button
- Up Navigation Button / Front and Rear Switch Button
- Down Navigation Button / Mic Button
- OK (Confirm) Button / Emergency Lock Button / Record Button
- Micro SD Card Slot
- Power / USB Charging Port
- Reset Button
- Rear Camera Port (currently not support)
Screen Icons
Installation
Step 1:
Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount square to the
roof and hood line of the vehicle.
Firmly press the mount onto the windshield. Wait at least 20 minutes before
mounting the camera.
Orient the mount as shown on the illustration above.
Step 2:
Insert the Memory Card
The Rexing V3 accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to
256GB. You will need to insert a memory card before you can begin recording.
Before inserting or removing a memory card, first ensure you’ve powered down
the device. Gently push the memory card in until you hear a click, and allow
the spring release to push the card out.
Step 3: Power the Camera and Format the Memory
Card
Power the camera by connecting the charger to the car cigarette lighter and
camera. To ensure the V3 records to your memory card properly and without
error. Before you start using a new memory card, you must format the card
within the camera using the format function. Always backup important data
stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then
turn on the device by connecting to a power source. Press OK to stop
recording. Then press the MENU button twice to enter the System Setup
Menu.
Use the UP and DOWN navigation buttons and go to the Format setting. Press the
OK button to confirm the selection.
You may now disconnect from power. The camera will shut down after 3 seconds.
The camera should begin recording automatically the next time it is powered
on.
Step 4: Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the
windscreen and tuck it under the trim.
Plug the car charger cable to a 12V DC power outlet or the car cigarette
lighter.
Connect car charger to the camera. The camera will auto-start recording once
it’s powered on.
Basic Operation
Device Power
The device will be automatically powered on when plugged into a 12V accessory
socket or cigarette lighter when receives a charge (i.e.: the vehicle is
started).
To turn the device on manually, press and hold the Power button until the
welcome screen appears.
The camera will automatically start recording when it’s powered on.
Menu Settings
Power the camera On. If the camera is recording, press the OK button to stop
recording.
Hold the MENU button and toggle to the desired mode.
Press the MENU button once to enter the settings menu for a Mode. Press the
MENU button twice to enter the System Settings (Set up).
Video Recording
The camera will automatically start recording when the device receives a
charge. The LED lights and red dot will blink red device when recording. Press
the OK button to stop recording.
Video Playback
Playback of videos can be done on the device or a computer.
To playback a video on the device, toggle to the Playback mode. Use the UP and
DOWN navigation buttons to toggle to the desired video. Press the OK button to
play.
During playback, use the OK (pause), UP navigation (rewind) and DOWN navigation (fast forward) buttons to control the video playback.
To playback, a video on the computer, either use an SD card adapter or connect the device to the computer directly using the USB cable.
To playback, a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer. Then place the adapter into the computer.
To playback, a video using a USB cable, connect the USB cable to the device
and the computer. After the device is powered on, press the OK button to
select Mass Storage.
On the computer, navigate to the device drivers. The videos are stored at:
\CARDV\MOVIE. The locked videos are stored at:\CARDV\MOVIE\RO.
Select the video to playback.
Wi-Fi Connect
Download “Rexing Connect” app from the App Store/Google Play Store.
- To access or exit the WiFi feature, hold down the UP navigation button.
- Open Wi-Fi settings on your phone, find “SSID” from the list, tap to connect. (Default password: 12345678)
- Open the Rexing Connect app, tap “Connect” to enter the realtime video streaming page.
- Once connected, the dashcam screen will switch to the camera view and will display “WiFi Connected” message. Using the Rexing Connect app, you can view a live preview of the dash cam screen, start/stop recording, as well as view and save your captures with your mobile device.
For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/.
GPS Logger
When connected to the camera, it will record the speed and location of your
vehicle as you drive.
You can then access these information while playing back your recordings using
the GPS Video player (For windows and Mac, available at rexingusa.com).
The dash cam will automatically search for the GPS signal once it’s connected
to the power source. Press the MENU button once and go to System Settings.
Toggle the GPS setting, and select your favorite speed unit.
After a GPS signal is found, the screen icon will turn from not connected to
active – as per the below icons.
Taking Photos
- To take a photo, stop video recording and toggle to the Photo Mode.
- Press the OK button to take a photo.
- To view a photo, stop video recording and toggle to the Playback Mode.
- Press the UP and DOWN navigation buttons to toggle through your photos.
To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete.
- Press the MENU once and toggle to the Delete option.
- Press the OK Button and select Delete Current or Delete All.
FCC ID: 2AW5W-V3
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
References
- Wi-Fi Connect
- Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
- Rexing Product Reg II | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>