nulea M505 Wireless Trackball Mouse User Manual
- June 16, 2024
- nulea
Table of Contents
- Product Function
- Basic Parameters
- Package Content
- 2.4G Connection
- Bluetooth Connection
- Mac OS System
- Mode Switch
- FAQ1
- What can you do when the trackball and cursor cannot work well?
- FAQ2
- Note the mouse charging problem.
- FAQ3
- Why is the cursor too sensitive to control?
- FAQ4
- Don't get used to using trackball mouse.
- FAQ5
- How to reprogram mouse buttons?
- FAQ6
- FCC Statement
- Correct Disposal of This Product
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
nulea M505 Wireless Trackball Mouse User Manual
Product Function
- Removable Ball
- DPI Swatch Key
- Back/Forward Button
- Mode Switch
- Scroll Wheel
- Left Key
- Right Key
- ON/OFF
Basic Parameters
Interface | 2.4G/Bluetooth |
---|---|
DPI | 200 – 400(Default) – 800 – 1200 -1600 |
Size | 6.6 4.1 2.2in |
Weight | 193g |
Transmission distance | 10m |
Power Rating | DC 5V—0.3A |
Report Rate | 250HZ (2.4G) / 115HZ (Bluetooth) |
Package Content
1 Wireless Trackball Mouse
1 USB-C Cable
1* User Manual
2.4G Connection
- Turn on the mouse. 1
- Take out the 2.4G receiver.
- Insert it into the computer USB port.
- Press the channel switch button, switch to 2.4G mode. The LED lights up for 5 seconds and then goes out, the pairing is successful.
Bluetooth Connection
Windows System(Take Windows 10 as an example)
-
Turn on the mouse.
-
Press the channel switch button to switch to Bluetooth mode.
-
Long press the switch button for 3-5 seconds, the LED light flashes rapidly and the mouse enters Bluetooth pairing mode.
-
Click the “Bluetooth devices” button on the computer.
-
Click the “Add or remove Bluetooth devices” button.
-
Search the Bluetooth “Nulea BT5.0 Mouse/Nulea BT3.0 Mouse”, and click the pairing button.
-
If the pairing is successful, the LED lights up for 5 seconds and then goes out.
Mac OS System
Please operate the Bluetooth installation steps(1~3) before pairing.
-
Click the “System Preferences” button on the Mac.
-
Click the Bluetooth button on the system preference folder
-
Search the Bluetooth “Nulea BT5.0 Mouse/Nulea BT3.0 Mouse”, and click the Pairing button. If installed completely, the mouse could be used normally.
Mode Switch
When 2.4G or Bluetooth connect successfully, shortly press the switch button
at the bottom of the mouse, and you could switch the modes easily.
Charging
- Low battery indicator flashes blue, in order not to affect the experience and function of the mouse, please charge in time.
- The charging indicator will glow red while the mouse is charging. The indicator light turns green when fully charged.
Sleep Mode
To save power, the mouse will enter sleep mode after 30 minutes of inactivity,
press any key to exit sleep mode.
FAQ1
What can you do when the trackball and cursor cannot work well?
Push the trackball from the bottom of the mouse. Use a dry cloth to clean the trackball regularly for better performance.
Take out the trackball
Clean the trackball & sensor
FAQ2
Note the mouse charging problem.
1. Please use our included charging cable to charge the mouse. 2. Do not use a fast charger to charge the mouse. Using a high-power adapter to charge the mouse may burn out the mouse's chip. (Directly use the computer USB port or a 5V charger to charge the mouse). 3. For your best experience, please fully charge the mouse before your first use.
FAQ3
Why is the cursor too sensitive to control?
There are 5 DPI levels: 200-400(Default)-800-1200-1600. Press the DPI button to adjust for your dreference.
FAQ4
Don't get used to using trackball mouse.
The trackball mouse helping relieve wrist discomfort when working. The special operation of the mouse may make you teel uncomfortable at first. Once you get command of using it, you will get its benefits and fall in love with it.
FAQ5
How to reprogram mouse buttons?
1. All keys are not programmable. 2. Forward/Backward buttons are not compatible with MAC OS.
FAQ6
1. When the mouse is charging, the charging indicator is red, and the charging completion indicator is green 2. Refer to the following figure for the position of charging indicator lamp
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household user should contact either the retailer where they purchased this product or their local government office, for details of where and hew they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Nulaxy is under license. Other trademarks and trade names are those of their respective owners.
WORK WITH YOUR FAVORITE
Visit : www.nulea.com for our 24/7
live chat or send an email to
support@nulea.com for support.
CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
Email: info.cetservice@gmail.com
Phone : +447419325266