Kittyhok B08Z3GP4PD Wireless Security Camera User Guide

: June 5, 2024
: Kittyhok

Table of Contents

How the camera works
How to set up the camera
App – Camera list & Group Cameras
App – Live Footage
App – Video Playback
Camera setting
Motion detection Managements
Record Schedule
Advance setting
Share Videos & Snapshots from phone
Me – App overall settings
Pair th camera to a Kittyhok NVR
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kittyhok B08Z3GP4PD Wireless Security Camera User Guide

How the camera works

How to set up the camera

Download App kittyhok, spend a few minutes to register an user account and login.

You can scan below QR code to find the Apps.

Kittyhok

ios

Android

Bring the camera close to your Wi-Fi router, plug it into power.

How to set up the camera

In App,tap + to add camera.

Select your camera type, follow on-screen guide to add the camera. When it’s done, the camera will display in your camera list. Tap to view live footage. (Default IPC WiFi password is 11111111 if it requires any)
How to set up the camera How to set up the
camera

If the camera was not added successfully, hold the reset button for 5 seconds and do it again. Make sure to provide CORRECT WiFi hotspot and password. (2.4G WiFi only)

App – Camera list & Group Cameras

Group. With group, you can group multiple cameras to a quad view or multiple view. Then you can view multiple cameras simultaneously with one tap.
One key Switch – At Home/ Away Mode.
At home mode — owner is at home, camera DOES NOT RECORD Away mode — owner is away, camera records.
Camera name, network status
Quick menu to recorded photos & videos,edit/ delete camera.
Share device with families or friends
Alarm messages
Video playback
Camera settings

Group cameras to multi-view: In Camera list, tap Group – Add group – select cameras to form a group. Each group can have up to 16 cameras.

App – Live Footage

In camera list, tap a camera to enter its live footage.
App - Live Footage

App – Video Playback

In camera list, tap Playback to play camera’s recorded videos. Make sure you have Micro SD card in the camera.
App - Video Playback

Note: Use classl 0 micro SD card for camera storage, or obtain Cloud Storage in App – Me – Cloud Mall. Check SD card status in setting – Device storage.

Camera setting

In camera list, tap Setting to enter camera settings.

Audio ON/ OFF
Voice instruction — voice guide settings
Motion detection settings
Record schedule settings
Sync camera time with your mobile
Mode selection — detect & record plans while user is away/ at home. At home mode — owner is at home, camera DOES NOT RECORD Away mode — owner is away, camera records.
Firmware update for camera
Device micro SD card storage status
Advanced settings

Motion detection Managements

Motion detection Managements Motion detection
Managements

Record Schedule

In record Schedule, you can schedule record times for camera.

Advance setting

In advanced settings, you can set timezone, video image, Device username and password.

In Device WiFi, you can update the camera’s WiFi connection.

While watching live footage or playback, you can save snapshots or video clips to your phone for sharing.
Share Videos & Snapshots from phone Share Videos &
Snapshots from phone

Me – App overall settings

Me - App overall settings

Tap profile photo to enter App account settings; includes email, phone number and change App login password.
Setting —App push alert ON/ OFF and other app settings.
Snapshot/ Record. Access photos & videos you saved to mobile.
Device share management. Manage device sharing.
Push notification. Turn App notification ON/ OFF.

Pair th camera to a Kittyhok NVR

Add camera – Match mode

Take the cameras close tc? the NVR; Install antennas for cameras and NVR.
Plug the camera to power using included power adapter.
Use a network cable to connect the camera to NVR’s LAN port
Right click mouse in your system to enter main menu, then click Video Manage (or Device manage) to enter device manage interface.
The above box shows information of your cameras, the below box shows channel information of your NVR.
Find your new camera on the above box, select it; if you don’t see your new camera, click Refresh.
7. Select an unoccupied channel of your NVR from below box, and click “Match Code”. It will take seconds for the camera and NVR to get connected.
After it’s successfully connected, you should see Status change to “Connect Success” on the channel. Camera information will disappear from above box. Camera is now successfully paired to the system.
Then you can unplug and move the camera to anywhere you want. When it gets power, it will automatically reconnect. (camera needs to be in the wifi range)

Hold the reset button to bring the camera to configuration mode.

Pair th camera to a Kittyhok NVR

On the NVR, right click -Add Cam by WiFi. Within a minute, the camera will be paired to the NVR.

Pair th camera to a Kittyhok NVR

Tips 1: please make sure your NVR has at least one empty channel.
Tips 2: you can also use an Ethernet cable to hard wire the camera to the NVR – goto ‘Camera Manage’, refresh to search the camera out,then click to select the camera,select an empty channel, use the ‘Match code’ tool to pair your camera to the NVR.

If any help needed, please email support@kittyhok.com