SVEN RX-100 Special Buttons for Functions Copy Paste Mouse User Manual
- June 5, 2024
- SVEN
Table of Contents
RX-100
USER’S MANUAL
Congratulations on purchasing the SVEN mouse!
Please read this User’s Manual before using the unit and retain this User’s
Manual in a safe place for future reference.
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and the information contained in it are copyrighted. All rights
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some
discrepancies may occur.
The information in this Manual is given in «as is» terms.
The author and the publisher do not bear any liability to a person or an
organization for loss or damage which has arisen from the information
contained in this Manual.
- Shipping and transportation equipment is permitted only in the original container.
- Does not require special conditions for realization.
- Dispose of in accordance with regulations for the disposal of household and computer equipment.
SAFETY PRECAUTIONS
- Protect your mouse from high humidity, dust or high temperatures.
- Do not use gasoline, spirit, or other dis- solvents for cleaning. This may cause damage to the surface. Clean the device with a soft cloth.
- Do not attempt to disassemble or repair your device.
- Protect the device against powerful shocks and falls — they may damage the internal electronics.
APPOINTMENT
RX-100 is an input device. It is designed to input (to enter) information into a PC and operate it.
PACKAGE CONTENTS
- Wired Mouse — 1 pc
- User’s manual — 1 pc
SPECIAL FEATURES
- Special buttons for functions “Copy (top left)/Paste (top right)”
- Adjustable sensitivity up to 4000 DPI
SYSTEM REQUIREMENTS
- Windows
- Free USB port
CONNECTION AND INSTALLATION
Connect the mouse to an available USB port of your PC. Turn on your PC. Installation of the mouse is automatic.
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| The mouse is not working. | 1. Disconnect the mouse from your PC and check the |
connector pins for possible damage. If there is no external damage found and
the connector pins are OK, connect the mouse to your PC again.
2. Address your nearest authorized service center.
If none of the above-mentioned solutions removes the problem, please consult the nearest authorized service center. Never try to repair the device on your own.
Technical support: www.sven.fi.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>