AVLUX LIGHTS 0282-11 AFRA Pendant Light Instructions
- June 5, 2024
- AVLUX LIGHTS
Table of Contents
AVLUX LIGHTS 0282-11 AFRA Pendant Light
Specifications
| Brand | AVLUX |
|---|---|
| Type | Pendant Lamp / Hanging Lamp |
| Model | Not Specified |
Pre-Installation Requirements
-
A. Power Switch
Ensure the power is turned OFF before installation. -
B. Required Tools
A drill and screws (x2) are needed for installation.
Installation Steps
- Secure the mounting bracket to the ceiling using the provided screws.
- The bracket has two attachment points for the screws.
- Connect the electrical wires.
- Wire connections are as follows: N (neutral) to N, L (live) to L.
- Ensure that the connections are secure and that the polarity is correct.
- Attach the lamp body to the mounting bracket.
- Ensure that the lamp is securely fastened to avoid any potential hazards.
Post-Installation
C. Power Switch
Turn the power ON after the lamp has been installed.FAQ
How do I ensure the power is off before installation?
Check the main circuit breaker or use a voltage tester at the light switch or fixture.
What type of screws are required for mounting the bracket?
The image suggests using two screws suitable for the ceiling material and capable of supporting the weight of the lamp.
How do I connect the electrical wires?
Match the N (neutral) and L (live) wires from the ceiling to the corresponding wires of the lamp, securing them firmly.
What should I do if the lamp is not securely attached to the mounting bracket?
Double-check the fastening mechanism and ensure that all parts are properly aligned and tightened.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>