CANOPIA 82815 Vitoria Carport Kit Instruction Manual
- October 30, 2023
- CANOPIA
Table of Contents
CANOPIA 82815 Vitoria Carport Kit
Product Information
The VitoriaTM 10×16 / 3×5 is a product that requires assembly. It is a registered design of Palram Industries Ltd. The product is recyclable and comes with a How to Assemble video guide that can be accessed through scanning the QR code or visiting canopia.shop/Assemble-Vitoria. In case of concerns or questions, customer support is available through various channels listed in the manual.
Product Usage Instructions
- Read the instructions carefully before starting assembly.
- Access the How to Assemble video guide by scanning the QR code or visiting canopia.shop/Assemble-Vitoria.
- If you still have concerns or questions, reach out to customer support through the channels listed in the manual.
- Keep the instructions in a safe place for future reference.
HAVE A CONCERN?
WE CAN HELP.
Before returning your purchase:
Please take a look at our
“How to Assemble” video guide. Scan the QR Code below or go to canopia.shop
/Assemble-Vitoria
You didn’t find what you were looking for?
We can help at canopia.shop/support
Still can’t find what you are looking for?
Please see next page for local customer care.
SCAN ME
WE ARE HERE TO HELP
For general questions: canopia.com/contact-us
- NORWAY
- SWEDEN
- ARGENTINA
- GREECE
- GREENLAND
- ICELAND
- ESTONIA
- JAPAN
- LATVIA
- LITHUANIA MAURITIUS
- MEXICO
- ROMANIA
- RUSSIA
- TURKEY
- UZBEKISTAN
- UKRAINE
- SWAZILAND
- KOREA
+972-4-848-6816 |
customer.service@palram.com
USA| CANADA| HUNGARY • SLOVAKIA
877-627-8476 | generalsupport@poly-tex.com| 905-5646007 |
sales@footprintproducts.com|
+420-493-523-523 | servis@garland.cz
UNITED KINGDOM • IRELAND| GERMANY| NEW ZEALAND
01302-380775 |
customer.serviceUK@palram.com|
0180-522-8778 |
customer.serviceDE@palram.com| 0800
800 880 | customer.service@palram.com
FRANCE • BELGIUM| ISRAEL| DENMARK
+33-169-791-094 |
customer.serviceFR@palram.com|
04-848-6800 |
customer.service@palram.com| 07-575 42
70 | post@nshnordic.com
ITALY • NETHERLANDS • PORTUGAL • SPAIN| AUSTRIA • LUXEMBURG • LIECHTENSTEIN|
SOUTH AFRICA
+33-169-791-094 |
customer.serviceFR@palram.com|
+49-180-522-8778 |
customer.serviceDE@palram.com|
011-397-7771 | receptionza@palram.com
AUSTRALIA| AUSTRALIA – GREENHOUSES| CROATIA • SLOVENIA
03-9219-4444 | salesvic@palram.com|
03-9544-6-999 |
info@mazedistribution.com.au|
0599-37-057 | info@ms-viscom.com
CZECH REPUBLIC| SWITZERLAND| POLAND
0493-523-523 | servis@garland.cz| 062-287-33-77 |
info@ritter.ch| Infolinia: 801-011-929 | 22-349-93-36
kontakt@ogrodosfera.pl
CYPRUS| FINLAND|
0224-971-13 | alpaco@alpacodomica.com |
www.alpacodomica.com| Neuvonta: 09-6866720
Tuki / Varaosat: 050-3715350 www.horisontenterprises.fi
tuki@horisontenterprises.fi|
TOOLS & EQUIPMENT
SITE PREPARATION & FOUNDATION
PREPARE THE SITE
The product must be positioned and fixed on a flat level surface.
- Clear the site
- Level the ground
CHOOSE YOUR FOUNDATION TYPE
Option 1:
Concrete/ Wooden surface 
The screws and masonry anchors supplied with the kit are
suitable for concrete fixing only.
Please consult with an expert regarding which fasteners are suitable for other
surfaces types (not supplied).
- Dig holes into the ground and fill with concrete. For frozen areas, please check the required depth needed for these holes.
Option 2: Paving stones a-10cm/4″ I b+c-40cm/1’4″ 
Option 3: Solid ground/ Asphalt
a -40 cm/ 1’4″ I b + c -40 cm/ 1’4″ 
DIMENSIONS
The Illustration describes center-to-center distance between poles.
INFORMATION
SAFETY ADVICE
- It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps
- Always wear work gloves during panel sliding .
- Always wear shoes and safety goggles when working with extruded aluminum .
- If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
- Do not touch overhead power cables with the aluminum profiles
- Do not climb or stand on the roof
- Keep children away from the assembly area.
- Do not attempt to assemble the product in windy or wet conditions .
- Dispose of all plastic bags. Keep them out of reach of small children .
- Do not lean against or push the products during construction.
- Do not position your product in an area exposed to excessive winds .
- Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells
- Make sure there are no hidden pipes or cables in the ground before anchoring to foundation
- This product is designed to be used mainly as a carport
- Heavy snow load on the roof can make it unsafe to stand below or nearby
- Keep roof and gutters clear of snow, dirt & leaves.
- Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance, especially in areas with severe weather conditions.
CARE & MAINTENANCE
- When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water .
- DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels
- Clean the product once assembly is complete
BEFORE ASSEMBLY
- Selecting a site
- Choose your site carefully before beginning assembly
- Choose a sunny position away from overhanging trees.
- The product must be positioned and fixed on a flat level surface
- The product must be secured directly to a solid foundation
- Take all components & parts out of the packages. Sort the parts and check against the content parts list
- Parts should be laid out close at hand. Keep all small parts (screws etc) in a bowl so they do not get lost
- Please note multi-sided profiles are used in this product As a result some holes in the profiles are not used during assembly
- Please review entire instructions before starting. Carry out the assembly steps in exact order .
- Please consult your local authorities if any permits are required prior to constructing the product
- Use only the parts registered in the content list, some parts may be surplus
IMPORTANT!
- Firmly connect the product to a level surface immediately after completion of the assembly
- Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid .
- During assembly use a soft surface below the parts to avoid scratches and damages .
- We recommend checking for restrictions or covenants for building this product in your area.
In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product
DURING ASSEMBLY
During assembly, you will encounter different icons for different products .
Please see below for more information:
You may use silicone lubricant spray on the frame in order to help you slide the panels into the profiles Do not spray the panels
****Use a rubber mallet if necessary
All panels with the stamped words “THIS SIDE OUT’ must be facing out to create
full UV protection.
Remove plastic sticker as panels are locked in place
Steps marked with dashed outlines refer to Extensions only Some of the steps
are irrelevant for an assembly of a single product When assembling a single or
an extended product,
some parts may be surplus
These 2 icons below indicate if screw’s tightening is required or not
Temporary
tightening of a few screws may be needed to prevent a profile from sliding out
“Tighten all screws once assembly is completed
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly, please refer the
relevant assembly step for important additional comments.
-
Step 1: Carefully spread silicone glue along the cross-section of the profile #7573 and at once attach the profiles together. It is recommended to wipe the extra residue silicone.
-
Step 3: It is recommended to place a sheet / Carton below the parts to avoid scratches and peeling of paint.
Profile should be fixed in front of the second set of holes from the edge. -
Step 5: Please connect two parts when one person lifts the construction at an angle as illustrated in drawing Sa.
-
Step 9: Central channel should remain open. Please place the panel aside the central channel of the arched profile, as illustrated in the top circle.
Please note you install the panels with the UV protected side out (marked with “THIS SIDE OUT”) and peel the film strip covering the panels. -
Step 10: Do not tighten the screws fully, until both sides panels in place.
-
Step 11: Profile stretching occurs only when all screws closed fully, at the same time; on both sides.
-
Step 12: Repeat and follow the same action for all profiles left as explained in stages 10-11.
-
Step 15: Optional – if you wish to use the gutters heads for water drainage, pop the inner plastic cap with a screwdriver and then remove it with your finger.
-
Step 17: Level the profiles legs and then adapt screws and plugs to the ground type.
10 YEAR LIMITED WARRANTY
PALRAM – CANO PIA I 10 YEAR LIMITED WARRANTY
Palram Canopia Ltd. (Company number 512106824) whose registered office is at
Teradion Industrial Park, M P Misgav 2017400, Israel (“Canopia”) warrants that
the product will be free from defects in material or workmanship for a period
of 10 years from the original date of purchase
- This warranty is valid only if the product is installed, handled, cleaned, and maintained in accordance with Canopia’s written specifications
- This warranty does not cover defects resulting from normal wear and tear including, but not limited to damage caused by use of force, incorrect handling, inappropriate use, negligence, accidents, impact from foreign objects, vandalism, pollutants, alteration, painting, damage resulting from cleaning with incompatible detergents or minor deviations of the product
- This warranty does not apply to damage resulting from “acts of Nature”, which includes but is not limited to hail, storm, tornado, hurricane, blizzard, flood, or fire
- Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure in writing within 30 days after discovery of the defect, Canopia, at its sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight-line depreciated basis for the length of the warranty
Palram Canopia Ltd.
Teradion Industrial Park, M.P Misgav 2017400, P.O.B 53, Israel
Tel +972.4.848.6900
Fax +972.4.848.6901
canopia@palram.com /
www.canopia.com
References
- YouTube
- Support Archive - Canopia
- tex.com
- Inspection Systems for the Electronics Industry – Viscom – Viscom
- Αρχική Σελίδα - Alpaco Domica
- Canopia by Palram - Celebrate Outdoor Living
- Laatua vapaa-aikaan | Horisont Enterprises
- YouTube
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>