Salind GPS 20 4G LTE Car GPS Tracker User Manual

June 17, 2024
Salind

Salind GPS 20 4G LTE Car GPS Tracker

Product Information

Specifications

  • Dimensions: 120 mm x 64 mm x 48 mm
  • Weight: Less than 10 meters
  • Network Bands: LTE-FDD: B1/B3/B5/B7/B8 B20 (max. 2W / min. 0,07W) GPRS/2G GSM 900 MHz. (max. 2W) DCS 1800 MHz. (max. 1W)
  • GPS Chip: MT2503 SIMCOM A7670E
  • Sensitivity: -162 dBm
Dimensions 120 mm x 64 mm x 48 mm
GPS Accuracy Less than 10 meters
Battery 3.7V 20.000 mAh Li-ion
Start-up Time Cold start: 60 s

Standby: 30 s
Operation: 10 s
Weight| 460 g
Network| GSM/GPRS
Band| LTE 4G, GPRS 2G, GSM 900 MHz, DCS 1800 MHz
GPS Chip| MT2503
GPRS/LTE Module| SIMCOM A7670E
GPS Reception| -162 dBm

Product Overview

Contents

  1. Package Contents
  2. Product Description and Battery Charging
  3. Activation
  4. Getting Started
  5. Usage
  6. Meaning of LED Lights
  7. Technical Information
  8. Safety Instructions
  9. Instructions for Battery Recycling
  10. Instructions for Disposal of Electronic Devices

Product Usage Instructions

Content
Before using the GPS locator for the first time, please read the user manual carefully. We advise you to:

  1. Check the content of the package to ensure everything is included.
  2. Familiarize yourself with the LED lights, charging port, and SIM card.
  3. Visit www.start.finder-portal.com for setup.
  4. Understand the meaning of the LED lights: orange for GSM status and blue for GPS status.

Usage

To use the GPS locator:

  1. Insert the SIM card (already inserted and not interchangeable) into the device.
  2. Power on the device and ensure it is connected to a GSM network (orange LED should be lit).
  3. Wait for the GPS to acquire a signal (blue LED should be lit).
  4. Visit v2.finder-portal.com for further configuration and tracking.

Instructions for Safety

Follow these safety instructions when using the GPS locator:

  • Read and understand the user manual before use.
  • Use the device as intended and avoid any misuse.
  • Keep the device clean and free from dirt or debris.
  • Store the device in a safe place when not in use.
  • Dispose of the device properly according to recycling guidelines.

Contact Information

If you have any questions, please contact us, we are here to help!

Salind UG (haftungsbeschränkt)
Auf der Fuhr 3
51570 Windeck
Germany
Email: info@salind-gps.de
Phone: +49 (0) 2292 39 499 60
Website: www.salind-gps.de

The Salind GPS team hopes you enjoy your Salind GPS Tracker 20 4G!

FAQ (Frequently Asked Questions)

Q: Where can I find the user manual?
A: The user manual can be found on our website atwww.start.finder- portal.com.

Q: How do I activate my Salind GPS Tracker?
A:  You can activate your Salind GPS Tracker 20 4G by scanning the provided QR code or by visiting start.finder-portal.com and following the activation instructions.

Q: Where can I download the app to use with my GPS Tracker?
A: The PAJ GPS FINDER app can be downloaded from the Google Play Store or the App Store. You can also track your device via the website v2.finder- portal.com.

How do I insert the SIM card?

The SIM card is already inserted and not interchangeable.

How long does it take for the GPS to acquire a signal?

The GPS typically acquires a signal within a few minutes of powering on the device.

Can I track multiple devices using the same account?

Yes, you can track multiple devices using the same account on our website.

What do the different LED colors on my GPS Tracker indicate?

The red LED indicates battery status, the orange LED represents GSM status, and the blue LED shows GPS status.

What should I do if I need to recycle the battery or dispose of the device?

For battery recycling, you can leave used batteries at a local collection point or return them directly to us. For disposal of electronic devices, follow the instructions provided in the manual and consider local regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals