ReXING MTC1 Motorcycle Dash Cam User Manual

ReXING MTC1 Motorcycle Dash Cam

Overview

Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.

care@rexingusa.com

877-740-8004
Our support team will respond you as soon as possible. Always a surprise in Rexing.
Check us out here.

• https://www.facebook.com/rexingusa/
• https://www.instagram.com/rexingdashcam/
• https://www.rexingusa.com/support/registration/

What’s in the box?

1. Monitor
2. Front camera
3. Rear Camera
4. Hardwire Kit Cable
5. GPS Logger
6. USB Cable
7. Monitor Stand Installation Kit
8. Remote Control
9. Zip Ties X 5
10. Adhesives
11. Screws X 4
12. User Manual
13. Safety Guide

Installation

Various Motorcycle models require different installation instructions. For you and your bikes own safety, please consider consulting a local professional for installation.

Warning
This is for reference only, please adjust the installation method based on your own motorcycle model. If you would like to purchase other accessories (Camera Extending Cable, Extra parts), please feel free to contact us. After you confirm the correct quantity and code of terminals, please make sure your cables and terminals are connected completely. Moreover, if a terminal is broken, it will have a poor connection, therefore it will not work properly.

Front and Rear Cameras Installation

Note:
Please repeat the same installation steps for both front and rear camera.

Warning
Different motorcycles can have different positioning point for your lenses. In some cases, you can stick your lenses upside down. If this is the case, you need to adjust the recording angle.

1. Unscrew the lens support fix.
2. Turn the cylinder-shaped lens body 360 degree.
3. You can adjust lens vertical angle up to 270 degrees.
   • Lenses are Water Proof (IP67)
   • If cleaning is necessary, please use a gentle cloth to clean lenses
   • Please clean any water, oil stain, or dust before sticking your 3M Adhesive Pad. If you relocate your lenses repeatedly, the 3M Glue ability to stick will weaken, and your lens may fall.
   • When you accelerate, the image quality may not be very stable, this is the character of CMOS sensors. Please be aware, this is not part of agreement.\

Monitor Installation

Place your motorcycle’s handle in the middle of the ring, then use a screw driver to tide the ring

Install a Micro SD Card

• Please use 8GB to 128GB micro SD card.

• Please use “Class 10 UHS-1” or higher standard card and higher speed card. If you use class 10 or lower standard cards, the camera may not able to film.

• Please format your micro SD card before use.
  Note:

  1. Format will delete all contents in your SD card, please backup your files before formatting.
  2. Do not release your finger before removing the memory card.
  3. Format regularly. We recommend once a month.
  4. If you are removing or inserting micro SD card while power on, it may damage your data or your camera.

Micro SD card installation

Make sure your camera’s power is off, and make sure you insert card correctly, push the card into the card slot until you hear a click.

Micro SD card removal

Make sure your camera’s power is off, push the card in the card slot until you hear a click, then you are safe to remove your micro SD card.

Cable Connection
Before installing your camera to your motorcycle, you can connect the camera to power source through a USB power cable. You can connect USB power cable to a 5V/2.0A output or a portable battery’s AC adaptor.

Hardwire Kit Connection

Optional Connection Methods
USB terminal can be connected to an AC adaptor/ a portable battery.

Warning

• AC adaptor and portable battery require 5V/2.0A output. If the portable battery is in a low power, it will start normally.
• When you connect your camera to USB power cable, if there is no sufficient electric current, the GPS receiver will be not able to work. Even through sometimes these problems occur, but they are not faulty.

Product Overview

Basic Operations

1. Power/Screen On/Off

   • Hold for about 3 secs to switch ON/OFF camera.
   • Press the button to deactivate/activate the camera screen.

2. Menu/Up Button

   • Recording Mode: Press to turn ON/OFF microphone (to record). When not filming (press OK button to stop recording), hold for about 3 secs to enter the setting menu for filming, hold for about 3 secs again to exit setting.
   • Play mode: Press and move to a specific location.
     When play stops, hold for about 3 secs to enter the setting menu for play, hold for about 3 secs to exit the settings.

3. MicroSD card slot
   Compatible from 8GB to 128 GB, we recommend class 10 or higher SD card.

4. OK button

   • Filming mode: press, start/stop filming.
   • Setting menu: confirmation and setting location.
   • Playing mode: Start/stop play videos.

5. Mode switch/Screen display switch/Next button When voice recording stops :
   hold for about 3 secs to switch from voices/ videos/ photos play mode.
   Filming mode:

   • Press to switch front and rear screen display mode.
   • Hold for about 3 secs, the camera will start SOS filming, and it will lock the video. To unlock, hold for about 3 secs.

6. Front Camera Port

7. Rear Camera Port

8. Remote control cable

9. Power connection port
   9- 1: Powered by Smart hardwire kit
   9-2: Powered By USB cable

10. Monitor mount socket
    Install the dash cam monitor and fix with the quick release plate

11. Emergency Video
    Press: switch front and rear lenses display mode.
    Hold for about 3 secs to start Emergency Video, after entering the Emergency Video Mode, hold for another 3 secs to cancel the mode. Emergency Video Mode automatically locks the recorded footage.

12. Remote control RESET button
    Use a pin to restart the camera.

13. Monitor RESET button
    Use a pin to restart the camera

14. LED light display
    Filming: red light on, flashing blue light.

15. 3″ LCD Screen
    Not a touch screen.

16. GPS Logger Port

Wi-Fi Connect
To connect to your mobile phone or tablet: Download the APP via link https://www.rexingusa.com/support/rexing-apps/ or scanned the QR code below.

SSID: NPD_CarDV_WiFi_XXXX
PASSWORD: 1234567890

Screen Display While Filming

Note 1

No GPS reception

GPS reception received

Note 2

Emergency Filming Icon
The icon will be only shown when the video is locked. Hold remote control button for 3 secs OR Press the Mode button, to lock the current video.

Menu Setting

Under the video filming mode, pressing ^ for about 3 secs to open menu setting page, so you can change settings

1. Video resolution: FHD/HD
2. Loop Recording: 1/2/3/5/10 minutes *1-minute cycle is recommended
3. Mic: ON/OFF
4. Volume: Standard/Low
5. Beep: ON/OFF
6. Start-up/Shutdown voice: ON/OFF
7. Time setting: set your dash cam’s date and hour
8. Date Format: set your date and hour display format
9. Stamp Format: Date and hour + model type/Date/model type/OFF
10. Language: ENGLISH
11. Flicker: automatic/50Hz/60Hz
12. LCD Power Saver: OFF/1 min/3mins
13. G-Sensor: OFF/High/Middle/Low
14. GPS: ON/OFF
15. Time zone: setting time zone
16. System setting: charging system
17. Format SD card: YES/NO
18. Hardware version: show current version

Warning

If the dash cam detects an error, (for example: lens terminal connection cable disappears, microSD card lost, insufficient storage or disconnected), a warning notice will be displayed on the screen with a warning voice. Eliminate the notice and voice by pressing any button on the monitor.

19. Loop Recording: With different settings, videos can be stored as 1/2/3/5/10 minute intervals. When the memory card full, the newest video will overwrite the oldest. Emergency Video/Anti-Overwrite: When filming, hold for about 3 secs, or G sensor detects shocks, Emergency Video begins. When Emergency Video is on, an icon will show up on the top of the screen. Under the Emergency Video mode, data will be stored in Emergency Video Folder. These videos cannot be deleted through the dash cam, if you want to delete them, you have to delete from computer.

Video 1: 1 min
Video 2: 1
Video 3: 1 min

When G sensor detects shocks while the camera is filming graph 2, graph 2 and graph 3 will be stored in the Emergency Video Folder.

• When the number of emergency video increase, your Micro SD card will be full, so please format your SD card regularly.
• To prevent insufficient space in your memory card, please set cycling time to 1 minute.

Filming Time

Filming Time Reference
Filming time may vary depends on different Micro SD cards.

Data above for reference only, actual times may be different.
Filming time is the sum of normal filming and Emergency Video Filming. The actual filming time may vary, depend on your using behaviours.

Troubleshooting

If you have any problems while using our product, please refer to the following table:

Specification

Warranty & Support

Warranty
The Rexing MTC1 Motorcycle Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/ registration), you can extend the warranty to 18 months.

Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at 877-740-8004. Queries are typically answered within 12-24 hours.

Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!

References

• GPS Player Type B
• Rexing USA | Your Roadside Eyewitness
• Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
• Support
• Rexing Product Reg II | Rexing USA
• Rexing Apps | Rexing USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>