DOMO DO9248J Slow Juicer Health Booster Instruction Manual

DOMO DO9248J Slow Juicer Health Booster

WARRANTY

Dear client ,
All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this.
In that case, we kindly request you to contact our customer service. Our staff will gladly assist you.

+32 14 21 71 91
info@linea2000.be
Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
Friday: 8.30 – 12.00 and 13.00 – 16.30

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty. If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it. The guarantee on accessories and components that are liable to wear-and-tear is only 6 months.
The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

• If the instructions in this manual have not been followed.
• In case of incorrect connection, e.g., electrical voltage that is too high.
• In case of incorrect, rough or abnormal use.
• In case of insufficient or incorrect maintenance.
• In case of repairs or alterations to the device by the consumer or non-authorised third parties.
• If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

• Read all instructions carefully. Keep this manual for future reference.
• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time. Make sure children cannot play with the packaging materials.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 16 and supervised.
• Keep the appliance and its cord out of reach of children younger than 16 years.
• All repairs should be carried out by the manufacturer or its aftersales service.
• Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the manufacturer, importer, or the supplier may be held liable.

ELECTRICAL WARNINGS

• In order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer or a separate remote control, or connected to a circuit that is regularly switched on and off by the utility.
• The appliance must be disconnected from its power source when not in use, during service and when replacing parts. Allow to cool before putting on or taking off parts, and before cleaning the appliance. To disconnect, turn controls to “OFF” or “0” position, then remove the plug from the wall. Never pull the cord or appliance to remove the plug from the socket.
• Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.
• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.
• Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.
• Keep the power cord away from hot parts and don’t cover the appliance.
• Unwrap the cord completely to prevent overheating of the cord. Do not allow the power cord supply to run underneath or around the unit.
• The appliance may not be used with an extension lead or a multiple socket.
• Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself.

INSTALLATION

• Do not place near flammable materials, gases or explosives.
• Do not use or store this appliance outdoors.
• Always use the appliance on a steady, dry and level surface.
• Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.

USE

• Do not use this appliance for other than intended use.
• Only use the appliance for domestic use. The manufacturer cannot be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.
• Never leave the appliance unattended while it is functioning.
• Do not operate the appliance with wet hands.
• The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock or injuries. Only use the utensils delivered with the appliance.

CLEANING AND MAINTENANCE

• To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
•  Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.
• All detachable parts must be completely dry after cleaning, and then assemble them into the appliance for the next use.

PRODUCT-SPECIFIC WARNINGS

• Always make sure the juicer cover is clamped securely in place before the motor is turned on. Do not unfasten clamp while the juicer is in operation.
• Do not move the appliance when it is operating.
• If the screw press should get obstructed, put the juicer in ‘reverse’ mode for about 2 to 3 seconds to let it turn in the opposite direction. After this, try to let the screw turn in the right direction again.
• Do not use the appliance if the rotating sieve is damaged.
• The blade is sharp. Always use the food pusher.
• Only use the food pusher to guide food into the juicer. Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the food pusher or another piece of fruit or vegetable to push it down. When this is not possible, however, switch off and unplug the appliance and disassemble the juicer to remove the remaining food.
• Avoid contacting moving parts.
• Never run the appliance while there are no foodstuffs inserted.
• Do not use the appliance for longer than 15 minutes continuously. The motor could overheat.
• If during use you notice a burnt smell or smoke, immediately stop using the juicer. Take the appliance to a service centre for check-up and repair.
• Make sure the switch is in “O” position after each use of your juicer. Make sure the motor stops completely before disassembling.
• When you need to move the whole appliance, ensure to hold the slow juicer by the motor unit instead of the bowl, lid or hopper to avoid potential accidents.
• Always use both hands to move the appliance.
• Do not use water that is warmer than 65°C to rinse the appliance.
  SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS

1. Pusher
2. Cover with fill opening
3. Sieve (x 3)
4. Squeezing screw
5. Bowl
6. Juice outlet cover
7. Juice outlet
8. Pulp outlet
9. Fastener
10. Motor block
11. On/Off switch + reverse
12. Measuring cup
13. Cleaning brush
14. Reset button

BEFORE THE FIRST USE

The low-speed juicing juicer is a unique system where fresh juice comes from squeezing rather than grinding. The slow juicer squeezes instead of grinding which allows the juice to maintain its pure colour, natural taste, nutrients and vitamins. The juice will flow in your measuring cup from the juice spout, and the pulp will be ejected from the pulp ejection spout and be collected in the other measuring cup. When using the juicer, the measuring cups must be assembled in position.

1. Remove all parts from the packaging.
2. Check that all accessories for the device are present and that the unit is not damaged.
3. Wash all removable and washable parts, such as the pusher, cover, sieve, squeezing screw, bowl and measuring cups in warm soapy water, rinse and dry them thoroughly.
4. Caution: Never submerge the motor block in water!

USE

PLACEMENT

1. Make sure the plug is not in the outlet and the on/off switch is turned off prior to assembling.

2. Put the motor block onto a stable, level surface.

3. Turn the bowl upside down and you will see a small rubber plate at the pulp outlet. Assemble the buffer plate on the bottom of the bowl well in position in the pulp outlet.

4. Position the bowl on the motor block. Make sure the bowl is mounted properly on the axle of the motor block and the residue outlet is placed well in position.

5. Position the desired sieve in the bowl (the sieve with small mesh for juice, the sieve with large mesh for jam or the sieve for frozen preparations, i.e. fo
   have been sufficiently defrosted so that a fork can be inserted into their centre).

6. Push the squeezing screw firmly into the centre of the bowl, making sure that it clicks into position, or else the cover will not close.

7. Position the cover on the bowl and make the symbol “ ” on the lid align with the symbol “ ” on the bowl and then rotate the bowl lid clockwise until the symbol “ ” on the lid aligns with the symbol “ ” on the bowl. Then press the fastener inwards to lock the lid. The lid has to be assembled well in position, otherwise the appliance will not operate.

8. Finally, put the food pusher into the lid.

9. Position a measuring cup under the juice outlet and a measuring cup under the pulp outlet.

10. Open the juice outlet cover. The machine is now ready for use.

11. Repeat these steps in reverse order when disassembling the machine.

PREPARATION OF THE FRUITS AND/OR VEGETABLES

• Clean the fruit and vegetables and cut them into pieces. For example, carrots shall be cut into thin slices with size of 15mm x 15mm before being put into the machine.
• Remove hard pits or seeds prior to pressing to prevent possible damage to the squeezing screw. The cores of peach, plum, mango and apricot shall not be put into the bowl lid to avoid any malfunction.
• Materials with thick or hard peel shall be peeled before being put into the juicer for processing. The peel and pits/seeds must be removed from oranges, lemons, grapefruit and melons before use.
• It is forbidden to process coconuts with their shell, complete sugarcane stalks or similar hard foodstuffs, since this may damage the motor.
• Foodstuffs with hard fibres shall be cut into slices of 3~5cm in length and 1.5~2cm in thickness.
• For leaf vegetables and materials with long & hard fibres (such as celery, wild celery herb and collard etc.): cut the stems of the materials into slices of 3~5cm in length and then roll up the leaves of the materials well.
• Frozen materials can only be used after being defrosted. Never use ice.
• Never process materials with a high level of vegetable oil or animal oil to avoid degradation and damage of the squeezing screw.
• Never put pieces of sugarcane, coconut flesh, kudzu or cereal (e.g. bean, rice) without being soaked with water into this juicer for processing.
• Do not put too much materials in the juicer each time, therefore materials with less moisture and hard fibres shall be cut into slices before being put into the bowl lid.
• It is not recommended to process hard fruits or vegetables rich in fibres and starch.

USAGE
The on/off switch has 3 positions:

• On: I
• Off: O
•  Reverse direction: R

1. Make sure that the machine is turned off (O) and put the plug in the outlet.

2. Position the 2 measuring cups under the 2 spouts.

3. Turn on the on/off switch (I).

4. Insert the pieces of vegetable and/or fruit into the opening at the top of the cover. Push the food down into the bowl using the pusher. Feed materials little by little approximately every 5 seconds. Do not push the materials into the feeding opening of the bowl lid with excessive force. Do not load food too fast and do not load too much food at a time.
   Tip: Begin with the harder fruit, and then squeeze the soft fruit.
   ! CAUTION: Do not insert fingers or other foreign objects into the opening of the cover while the machine is in use. Use only the pusher, and not spoons, fork, sticks, etc.
   ! Never use the machine with an empty bowl.

5. The juicer will start extracting the juice. After a few minutes, the juice will flow out.

6. If the machine becomes stuck during use, turn the on/off switch to “R” and hold down the switch so that the machine turns in the opposite direction. This could remove any obstructions. Release the switch to stop the reverse movement. Caution: Do not turn the power switch from “I” to “R” or from “R” to “I” directly at any time during operation. If required, firstly press the power switch to “O” position and make the appliance stop running completely and then turn the power switch to “R” or to “I”. If this does not work, turn the machine off, remove the plug from the outlet, disassemble the appliance and re-assemble according to the instructions. Then try to start the machine again.

7. When the measuring cup is full (max. 400 ml) or when all the food has been squeezed, turn the on/off switch off (O) and empty the measuring cups.
   Tip: Rinse all parts immediately after use.

Caution:

• Never let the machine work for longer than 15 minutes at a time. A minimum rest time of 30 minutes must be maintained between two consecutive cycles.
• Do not touch the on/off switch with wet hands.
• If the cover becomes loosened from the bowl during use, the motor of the machine will automatically stop to prevent any hazards.
• · Juice that is not drunk immediately should always be stored in the refrigerator.

RESET BUTTON
The reset button must be used when the machine is automatically shut off due to overheating or blockage of the machine.

1. If the machine overheats, it will turn off automatically.
2. Turn the machine off (O).
3. Wait 10 minutes and then push the reset button at the bottom of the appliance to switch the machine on again.
4. After that, press and hold the power switch to the “R” position for a few seconds and then try operating again. When the reverse function does not work, turn off the machine, disassemble the appliance and reassemble following the instructions given. After reassembly please try turning on the machine.

CLEANING AND MAINTENANCE

1. In order to detach & clean more easily, run the juicer without load for about 30 seconds after removing the residue. If the bowl lid cannot be detached easily, please follow and repeat the following operation for two or three times: reverse (R) — off (O) — on (I); at the same time, hold and rotate the bowl lid to detach it. After finish extracting juice, pour some water into the bowl lid to
   clean it so that it will be easier to be detached.

2. Remove the plug from the outlet and allow the machine to cool completely before cleaning.

3.  Remove the food pusher, then push the fastener outwards to release the bowl lid.

4. Turn the cover loose from the bowl and disassemble the rest of the parts in reverse order of assembly.

5. If it is difficult to detach the squeezing screw, put the bowl on the working table and hold the squeezing screw with one hand, then push the axis of the squeezing screw at the bottom with the power switch to the “O” position and empty

6. Empty the measuring cups and clean the cover, the pusher, the sieve, the bowl, the squeezing screw and the measuring cups under running water. Use the cleaning brush to clean the sieve properly.

7. If you need to clean the residue outlet of the bowl thoroughly, you shall firstly pull the buffer plate out of the residue outlet and then clean it completely with the cleaning brush.
   Caution: Do not use metal sponges, which could damage the machine.
   ! Be careful when you clean sieve. The sieve is sharp.
   ! Do not put any parts in the dishwasher. The high temperatures might damage the parts.

8. Wipe the exterior of the motor block clean with a moist cloth. Never submerge the motor block in water!

9. Dry all parts thoroughly, re-assemble the machine and store it in a dry place
   Tip: Rinse all parts immediately after use.

ENVIRONMENTAL GUIDELINES

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or
the shop where you purchased the product.

The packaging is recyclable. Please treat the packaging ecologically.

References

• www.ELEKTROKOLA.cz - Crussis, Ghost, Kellys, Leader Fox, Pells, Specialized - doprava zdarma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>