FAZEPRO TO100 YIP Smart Tag User Guide
- June 6, 2024
- FAZEPRO
Table of Contents
FAZEPRO TO100 YIP Smart Tag User Guide
Quick Start Guide
- Pull battery tab and press on the top of the battery to ensure it is secure. If you hear a sound and see a light flashing, you have done this correctly.
- On your iPhone, open the Find My app. Under “Items” select “Add Item” then “other supported Item” then “Connect” then you can name your YIP Smart Tag before selecting “Continue.” If you heard a sound, you have done this correctly.
- Firmly attach the back cover using your fingers to press down to ensure protection of your YIP Smart Tag.
- Remove the blue film from the front of the tag to expose the adhesive tape. With the engraved side facing away from the adhesive, insert the metal tag and press firmly to ensure the adhesive is fully attached to the metal tag.
- Attach the metal split ring through the hole on the top of the YIP Smart Tag.
- Attach to the item you want to keep track of.
Having Trouble?
- Please visit www.fazepro.com/xxxx for tutorials on how to trouble shoot your YIP Smart Tag.
- Insert a QR code that takes them to the same website location.
- Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction.
FCC ID: 2A2UW-TO100
Caution:
Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment
Apple, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>