NUWATT NW-SQDL4-9WB6P Integrated LED Recessed Light Kit User Guide
- June 5, 2024
- NUWATT
Table of Contents
NUWATT NW-SQDL4-9WB6P Integrated LED Recessed Light Kit
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Most electrical accidents are caused by carelessness. Review these basic
electrical guidelines before you begin this installation.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
- Never disable grounding devices. Ensure all appliances that require grounding are properly grounded, and that the electrical system itself is properly grounded.
- Meet all electrical code requirements that cover the work you are doing.
- Work with enough light to see what you are doing.
- Certified Airtight per ASTM E283-04.
- When in doubt about safety of any electrical repair or test, call in a professional electrician.
- This fixture is IC rated for direct contact with insulation.
- This fixture is intended for indoor or wet location use.
- Do not modify this fixture. If any modifications are made, it may make the product unsafe and void the warranty.
WARNING: Before touching any wire, use a lD voltage tester to ensure wires are not live.
WARNING: When you check for voltage lD in a receptacle, check both outlets each may be controlled by separate wiring circuit. Before working on a circuit,lD go to main service panel and remove the fuse or trip the breaker that controls that circuit. Tape a warning sign to the panel warning others to leave the circuit OFFwhile you work. /i\ WARNING: CONSULT A QUALIFIED [D ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTORWARNING: Changes or modifications lD to this unit not approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 1 5 of FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
unproper operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation location. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Relocate the receiving antenna.
- Increase separation between the equipment and receiver.
- Connect equipment into an outlet on a circuit different from which the receiver is connected.
- Consult an experienced radio/TV technician for help.
WARRANTY
5-YEAR LIMITED WARRANTY
The manufacturer warrants this lighting fixture against defects in materials
and workmanship of five years from the date of purchase. If within this period
the product is found to be defective or workmanship, the product must be
returned, with a copy of the bill of sale as proof of purchase, to the
original place of purchase. The manufacturer will, at its option, repair,
replace, or refund the purchase price to the original purchaser or consumer.
This warranty does not cover light bulbs or the fixture becoming damaged due
to misuse, accidental damage, improper handling and/or installation, and
specially excludes liability for direct, incidental, or consequential damages.
As some states do not allow exclusions or limitations on an implied warranty.
This warranty gives you specific rights and you may also have other rights
that vary from state to state.
Contact the Customer Service Team at
1-862-801-2006 or visit
www.NUWATTLIGHTING.com.
PRE-INSTALLATION
PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents sections. If any part appears missing or damaged, do not install this product and contact the Customer Service Team at 1-862-801-2006
TOOLS REQUIRED
INSTALLATION
Turn the Power OFF
- Place the wall switch to the “OFF” position
- Turn “OFF” the main paower at the breaker panel or remove fuse from the fuse box.
Prepare for the installation location
- Use the template (included) to mark the desired installation where you desire.
- Use a drywall saw to cut the opening outlined by the template
Driver Wiring
- Open the hardwire box swing cover and remove the appropriate knockout(s).
- nsert the electrical supply cable through the knockout and secure with a cable connector (sold separately)
- Using wire nuts, connect green ground wire of cable to green wire on box. Connect white wire of cable to white wire of box. Connect black wire of cable to black wire of box
- Place all wiring and connections back into the box and close the cover.
- Insert hardwire box through the mounting hole. Cable to fixture New Construction Applications: Hardwire box shall be firmly secured to studs, joists, or similar fixed structural units. Remodel Applications: Do not require the hardwire box to be firmly secured after the mounting plates, studs, joists or structural units have been concealed.
Fixture Installation
- Connect the fixture to the male/female connectors on the hardwire box
- Twist to lock
Trim Installation (Optional)
Push the bezel lock to secure the bezel on trim
The bezel can be changed with the multiple finishes of your choice.
- WH-White
- BLK- Black
- BN- Brushed Nickel
- BZ- Bronze
Fixture Placement
Push spring loaded clips on the fixture upwards and insert fixture base in to
the mounting hole. Release the clips and fixture will be pulled flush to the
ceiling. 
Questions, problems with your product? Call Nuwatt Lighting Customer Support 8 AM – 5PM PST I Monday – Friday 1-862-801-2006 NUWATTLIGHTING.COM