NUWATT NW-GMB-C4-10W-5CCT-WH-6PK 4 Inch Downlight Installation Guide
- June 5, 2024
- NUWATT
Table of Contents
NUWATT NW-GMB-C4-10W-5CCT-WH-6PK 4 Inch Downlight Installation Guide
4″ LED Downlight
WARNING:
- RISK OF FIRE OR ELECTRIC SHOCK. INSTALLATION OF THIS RETROFIT KIT REQUIRES A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE LUMINAIRE’S ELECTRICAL SYSTEM AND THE HAZARD INVOLVED.IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION.CONTACT A QUALIFIED ELECTRICIAN.
- RISK OF FIRE OR ELECTRIC SHOCK. INSTALL THIS KIT ONLY IN THE LUMINAIRE THAT HAS THE CONSTRUCTION FEATURES AND DIMENSIONS SHOWN IN THE PHOTOGRAPHS AND/OR DRAWINGS AND WHERE THE INPUT RATING OF THE RETROFIT KIT DOES NOT EXCEED THE INPUT RATING OF THE LUMINAIRE.
- DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.
- TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS.
- THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE ELECTRICAL CODES. THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL OR NATIONAL REGULATIONS FOR ELECTRICAL INSTALLATIONS.
“THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS”
INSTALLATION FOR 4″ RECESSED HOUSING
- Disconnect all power prior to installation
- Remove the existing trim and bulb to gain access to the socket
- Screw the E26 socket adapter into the open socket (Figure 1) 4. Plug in the quick connector (Figure 2)
- Once connector is attached, gently push trim into fixture
- (For 4″ downlights) Unscrew and adjust the plate inward or outward for 4″ diameter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>