NUWATT NW-GMB-C4-10W-5CCT-WH-6PK 4 Inch Recessed Retrofit Downlight User Guide

NUWATT NW-GMB-C4-10W-5CCT-WH-6PK 4 Inch Recessed Retrofit Downlight

SAFETY  INSTRUCTIONS

• Most electrical accidents are caused by carelessness. Review these basic electrical guidelines before you begin this installation.
• Use tools with insulated handles and ladders made of wood or fiberglass.
• Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
• Never disable grounding devices. Ensure all  appliances that require grounding are properly grounded, and that the electrical system itself is properly grounded.
• Meet all electrical code requirements that cover the work you are doing.
• Work with enough light to see what you are doing.
• Certified Airtight per ASTM E283-04.
• When in doubt about safety of any electrical repair or test, call in a professional electrician.
• This fixture is IC rated for direct contact with insulation.
• This fixture is intended for indoor or wet location use.
• Do not modify this fixture. If any modifications are made, it may make the product unsafe and void the warranty.
• WARNING: Before touching any wire, use a voltage tester to ensure wires are not live.
• WARNING: When you check for voltage in a receptacle, check both outlets each may be controlled by separate wiring circuit.
• WARNING: Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls that circuit. Tape a warning sign to the panel warning others to leave the circuit OFF while you work.
• WARNING: CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT CONDUCTOR.

WARRANTY

5-YEAR LIMITED WARRANTY
The manufacturer warrants this lighting fixture against defects in materials and workmanship of five years from the date of purchase. If within this period the product is found to be defective or workmanship,   the product must be returned, with a copy of the bill of sale as proof of purchase, to the original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price to the original purchaser or consumer. This warranty does not cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling, and/or installation, and specially excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions or limitations on an implied warranty. This warranty gives you specific rights and you may also have other rights that vary from state to state.Contact the Customer Service Team at 1-862-801-2006 or visit www.NUWATTLIGHTING.com

PRE-INSTALLATION

PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents sections. If any part appears missing or damaged, do not install this product and contact the Customer Service Team at 1-862-801-2006

TOOLS REQUIRED

INSTALLATION

• Turn the Power OFF
  •  Place the wall switch to the “OFF” position
  •  Turn “OFF” the main paower at the breaker panel or remove fuse from the fuse box.
• Prepare for the installation location
  •  Use the template (included} to mark the desired installation where you desire.
  •  Use a drywall saw to cut the opening outlined by the template
• Driver Wiring
  • Open the hardwire box swing cover andremove the appropriate knockout(s). Cable to fixture
  •  Insert the electrical supply cable through the knockout and secure with a cable connector  (sold separately}
  •  Using wire nuts, connect green ground wire of cable to green wire on box. Connect whitewire of cable to white wire of box. Connect black wire of cable to black wire of box
  •  Place all wiring and connections back into the box and close the cover.
  •  Insert hardwire box through the mounting hole.
  • New Construction Applications: Hardwire box shall be firmly secured to studs, joists, or similar fixed structural units.

Remodel Applications: Do not require the hardwire box  to be firmly secured after the mounting plates, studs, joists or structural units have been concealed.

COMPATIBLE DIMMERS

DVCL-153PDH
CT-600P
DIVA| DVCL-153P
LEVITON| DECORA| 6672
6674
PASS& SEYMOUR| HARMONY| HCL453PTCCCV6

• Fixture Installation
  •  Connect the fixture to the male/female connectors on the hardwire box
  •  Twist to lock
• Fixture Placement
  • Push spring-loaded clips on the fixture upwards and insert the fixture base into the mounting hole. Release the clips and fixture will be pulled flush to the ceiling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>