NITECORE HC60 V2 Series USB-C Rechargeable High Performance Headlamp User Manual
- June 5, 2024
- Nitecore
Table of Contents
NITECORE HC60 V2 Series USB-C Rechargeable High-Performance Headlamp
Features
- Utilizes an OSRAM P9 LED with a max output of 1,200 lumens
- Max peak beam intensity of 4,240cd and max throw of 130 meters
- An optical system combined with crystal coating and Precision Digital Optics Technology” (PDOT)
- Powered by 1 x 18650 or 2 x CR123 batteries with a max runtime of 680 hours
- One switch controls 5 brightness levels and 3 special modes
- Highly efficient constant aurrent circuit provides a stable output
- The power indicator beneath the switch indicates the remaining battery power (Patent No. ZL201220057767.4)
- The power indicator can display the battery voltage (+0.1V)
- Built-in Li-ion battery charging circuit with a USB-C port
- Wide range flood optic system of 100° iMumination angle specially designed for outdoor applications
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6) 180 adjustable tit angle
- Constructed from aero grade aluminum alloy
- HA III military grade hard-anodized finish
- Waterproof rating in accordance with IPX7 Impact resistant to 1 meter
Specifications
- HC60 V2/ HC60W V2
- Dimensions:
- 84mmx35.8mmx53.5mm (3.31″x1.41″x2.11″) (Bracket Included)
- Weight:
- 70g (2.470z) (Bracket Induded, Headband and Battery Not Included)
- 108.5g (3.830z) (Bracket and Headband Included, Battery Not Included)
- HC6OM V2
- Dimensions:
- 84mmx50mmx46mm (3.31″x1.97″x 1.81″) (NVG Mount Included)
- Weight:
- 82g (2.89 02) (NVG Mount Included, Battery Not Included)
Accessories
NITECORE 18650 Rechargeable Li-ion Battery (NL1834 3,400mAh), Spare O-ring, USB-C Charging Cable, Spare Switch Cover, Headband, Bracket
Battery Options
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x 18650 Li-ion battery (3,400mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions. The runtime of TURBO is tested without the temperature regulation.
TECHNICAL DATA
Charging Function
Battery Installation
Warranty Service
All NITECORE® products are warranted for quality. Any DOA/ defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/ malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. the product(s) is/are damaged due to improper use. (e.g. reversed polarity
installation)
3. the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact
a local NITECORE distributor or send an email to
service@nitecore.com All images, text and
statements specified herein this user manual are for reference purpose only.
Should any discrepancy occur between this manual and information specified on
www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to
interpret and amend the content of this document at any time without prior
notice.
Charging Function
The HC60 V2/ HC60W V2/ HC60M V2 is equipped with an intelligent
chargingsystem. As illustrated, unscrew the charging port cap after inserting
the battery, use the USB cable to connect an external power supply (e.g. a USB
adapter or other USB charging devices) to the charging port to begin the
charging process. During the charging process, the power indicator will flash
slowly to inform the user.
.When the battery is fully charged, the HC60 v2/ HC60w v2/ HC60M V2 will cease
the charging process and the power indicator will become steadily turned on to
inform the user.
When the charging status is abnormal (e.g. the battery is defective or
inserted incorrectly), the HC60 V2/HC60W V2/ HC60M V2 will cease the charging
process and the power indicator will flash quickly to inform the user.
.The charging time for an 18650 Li-ion battery (3,400mAh) is approx. 5 hours.
(Charged via the 5V/1A adapter)
Operating Instructions
Battery Installation
Insert the battery(s) as illustrated and screw to tighten the battery cap.
Note: After the battery insertion, the power indicator will flash to indicate
the battery voltage. Please refer to the “Power Indication” section of this
manual for more details.
Warnings:
- Ensure the battery(s) is/are inserted with the negative end towards the spring. The product will not work if the battery(s) is/are incorrectly inserted.
- CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
- . When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent acidental activation or battery leakage.
On / Off
On: When the light is off, long press the Power Button to turn it on.
Off: When the light is on, long press the Power Button to turn it off.
Note: The HC60 V2/ HC60W V2/ HC60M V2 has memory function. When reactivated,
the headlamp will automatically access the previous memorized brightness
level.
Brightness Levels
When the light is on, short press the Power Button to cycle through the
following brightness levels: ULTRALOW – LOW- MID – HIGH – TURBO.
Direct Access to ULTRALOW/ TURB0
ULTRALOW: When the light is off, short press the Power Button to directly
access
ULTRALOW.
TURBO: When the light is off, press and hold the Power Button even after
accessing the memorized brightness level until it accesses TURBO0.
Special Modes (STROBE / SOs/ BEACON)
When the light is off, double press the Power Button to access the STROBE
Mode.
When the STROBE Mode is on, short press the Power Button to cycle through the
following special modes: SOS BEACON-STROBE. When one of the special modes is
on, long press the Power Button to exit special modes and turn off the light.
Power Indication
When the battery is inserted, the power indicator will flash to show the
battery voltage (+0.1V). For example, when the battery voltage is at 4.2V, the
power indicator will flash 4 times followed by a 1.5-second pause and 2 more
flashes. Different voltages represent the corresponding remaining battery
power levels:
ATR (Advanced Temperature Regulation)
The integrated ATR technology regulates the output of the Hc60 V2/ HC60W V2/
HC60M V2 according to the working condition and ambient environment to
maintain the optimal performance.
Changing Batteries
The batteries should be replaced when the output appears to be dim or the
headlamp becomes unresponsive due to low power.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>