BOSCH PLL 5 Laser Spirit Level with Wall Holder Instruction Manual

: June 5, 2024
: Bosch

Table of Contents

Safety Notes
Functional Description
Technical Data
Assembly
Operation
Maintenance and Service
Documents / Resources

PLL 5 Laser Spirit Level with Wall Holder
Instruction Manual

PLL 5

Original instructions

Safety Notes

Working safely with the measuring tool is possible only when the operating and safety information are read completely and the instructions contained therein are strictly followed. Never make warning labels on the measuring tool unrecognizable. SAVE THESE INSTRUCTIONS.

▶ Caution – The use of other operating or adjusting equipment or the application of other processing methods than those mentioned here can lead to dangerous radiation exposure.
▶ The measuring tool is delivered with a warning label in the German language (marked with the number 13 in the representation of the measuring tool on the graphic page).

IEC 60825-1:2007<2mW 635 nm Laser Radiation Do not stare into beam 6 Class 2 laser product

▶ Before putting it into operation for the first time, attach the supplied sticker in your national language over the German text on the warning label.
▶ Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. This measuring tool produces laser class 2 laser radiation according to IEC 60825-1. This can lead to persons being blinded.
▶ Do not use the laser viewing glasses as safety goggles. The laser viewing glasses are used for improved visualization of the laser beam, but they do not protect against laser radiation.
▶ Do not use the laser viewing glasses as sunglasses or in traffic. The laser viewing glasses do not afford complete UV protection and reduce color perception.
▶ Has the measuring tool been repaired only by qualified specialists using original spare parts? This ensures that the safety of the measuring tool is maintained.
▶ Do not allow children to use the laser measuring tool without supervision. They could unintentionally blind other persons or themselves.
▶ Do not operate the measuring tool in explosive environments, such as in the presence of flammable liquids, gases or dust. Sparks can be created in the measuring tool which may ignite the dust or fumes.

Keep the measuring tool away from cardiac pacemakers.
The magnets generate a field that can impair the function of cardiac pacemakers.
▶ Keep the measuring tool away from magnetic data medium and magnetically- sensitive equipment. The effect of the magnets 14 can lead to irreversible data loss.

Functional Description

Intended Use
The measuring tool is intended for determining and indicating exact horizontal and vertical lines. It is also suitable for checking plumb lines and horizontal partitions or
surfaces.
The measuring tool is suitable exclusively for operation in enclosed working sites.

Product Features
The numbering of the product features shown refers to the illustration of the measuring tool on the graphic page.

Wall holder
Pin
The metal plate of the wall holder
Adhesive tape strip*
Belt clip
Spirit level for vertical alignment
Spirit level for horizontal alignment
Aluminum supporting surface
Exit opening for laser beam
The latch of the battery lid
Battery lid
Supporting points
Laser warning label
Magnets
On/Off switch
*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.

Technical Data

Line laser	PLL 5
Article number	3 603 K15 000
Working range to approx.*	5m
Leveling Accuracy**	±1mm/m
Operating temperature	+5 °C…+40 °C
Storage temperature	–20°C…+70°C
Relative air humidity, max.	90%
Laser class	2
Laser type	635 nm, <2 mW
C6	9.33
Batteries	2×1.5V LR03 (AAA)
Weight according to EPTA-Procedure 01/2003	0.12 kg
Dimensions	142 x 27 x 30 mm

when using the wall holder 1; under unfavorable conditions such as intense sun irradiation, the working range is smaller
** when the measuring tool is positioned correctly (see “Positioning the Measuring Tool”, page 27)
Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may vary.

Assembly

▶ Inserting/Replacing the Battery (see figure A)
Alkali-manganese batteries are recommended for the measuring tool.
To open the battery lid 11 , press the latch 10 in the direction of the arrow and remove the battery lid.
Place the battery-recovery ribbon under the first battery being inserted. Insert the supplied batteries in the sequence shown in the figure, paying attention to the correct polarity.
Always replace all batteries at the same time. Only use batteries from one brand and with an identical capacity.
▶ Remove the batteries from the measuring tool when not using it for extended periods. When stored for extended periods, the batteries can corrode and discharge themselves.

Operation

Initial Operation
▶ Protect the measuring tool against moisture and direct sunlight.
▶ Do not subject the measuring tool to extreme temperatures or variations in temperature. For example, do not leave it in vehicles for longer periods. In case of large variations in temperature, allow the measuring tool to adjust to the ambient temperature before putting it into operation.
▶ Avoid heavy impact to or falling down of the measuring tool. Damage to the measuring tool can impair its accuracy. After heavy impact or shock, compare the laser line with a known horizontal or vertical reference line.

Switching On and Off
To switch on the measuring tool, push the On/Off switch 15. Immediately after switching on, the measuring tool sends a laser beam out of the exit opening9.
Do not point the laser beam at persons or animals and do not look into the laser beam yourself, not even from a large distance.
To switch off the measuring tool, push the On/Off switch 15 again.
Do not leave the switched-on measuring tool unattended and switch the measuring tool off after use. Other persons could be blinded by the laser beam.

Measuring Functions
Note: The specified leveling accuracy applies to the alignment of the laser beam with reference to the spirit levels 6 and 7.

Positioning the Measuring Tool (see figure B)
For precise alignment with the spirit levels, the position of the measuring tool is important.
The specified leveling accuracy is only achieved when the measuring tool is correctly positioned:
– For horizontal alignment with the spirit level 7 , the aluminum supporting surface 8 of the measuring tool must face downward.
– For vertical alignment with the spirit level 6, the exit opening for the laser beam 9 must face upward.

Aligning with the Laser Line
Horizontal Alignment (see figures C–D): Position the measuring tool with the three supporting points 12 against the wall or with help of the magnets 14 , fasten it to the wall holder 1 or to another magnetic surface.
The aluminum supporting surface 8 of the measuring tool must face downward. Align the measuring tool horizontally with help of the spirit level 7. Picture frames or tiles, as an example, can be aligned alongside the horizontal laser line.
Vertical Alignment (see figure D): Position the measuring tool with the three supporting points 12 against the wall or with help of the magnets 14, fasten it to the wall holder 1 or to another magnetic surface. The exit opening for the laser beam 9 must face upward. Align the measuring tool vertically with help of the spirit level 6. Top and bottom cabinets, for example, can be aligned alongside the vertical laser line.
Alignment off of Reference Points (see figure E): Position the measuring tool with the three supporting points 12 against the wall or with help of the magnets 14 , fasten it to the wall holder 1 or to another magnetic surface. Turn the measuring tool to any angle in order to align the laser beam to the reference points. In this manner, as an example, picture frames can be hung parallel to a stairway or ceiling pitch.

Checking Horizontal/Vertical Lines with the Spirit Levels (see figure F)
The measuring tool can be used at a contractor’s level for checking horizontal or vertical lines, e.g., for the level set-up of a washer or a refrigerator. Position the measuring tool with the aluminum supporting surface 8 facing against the surface to be checked. When positioning against horizontal surfaces, the aluminum supporting surface 8 must face downward. When positioning against vertical surfaces, the exit opening for the laser beam 9 must face upward.

Working Advice
Keep the adhesive tape strips 4 out of the reach of small children. Children could mistake the strips for chewing gum.

Mounting to a Wall
Four fastening methods are available for fastening the wall holder to different surfaces:
– Fastening with Adhesive Tape Strips (see figure G): With the removable adhesive tape strips 4 , the wall holder can be fastened to sensitive or delicate structural materials without causing damage to them. The structural surface must be straight, firm, dry, grease-free, and have a temperature of at least 15 °C. Pull off one of the protective foils from an adhesive tape strip (1) and position the adhesive tape strip onto the backside of the wall holder (2) in such a manner that its end projects out. Pull off the second protective foil (3) and firmly press the wall holder with the adhesive tape strip against the structural surface (4) for at least five seconds. To remove the wall holder, pull out the adhesive tape strip by the projecting end slowly and as parallel as possible to the structural surface (5).
– Fastening with Pins (see figure H): With pins 2 provided, the wall holder can be fastened to drywall or wooden walls. Insert the pins through the openings in the wall holder as shown in the figure.

– Fastening with a Screw: Place the wall holder 1 via the opening on the backside onto a screw that projects lightly out of the wall.
– Fastening with Adhesive Tape (see figure I): The wall holder can also be fastened with commercially available adhesive tape (not included in the delivery scope) as shown in the figure.
For all four fastening methods, pay attention that the wall holder 1 is fastened securely to the structural surface. Faulty measurements can result when the wall holder slips away.
Attach the measuring tool via the magnets 14 onto the metal plate 3 of the wall holder 1.
Belt Clip
With the belt clip 5, the measuring tool, as an example, can be hooked to a belt and is always at hand.

Maintenance and Service

Maintenance and Cleaning
Check the measuring tool each time before use. In case of visible damage or loose components inside the measuring tool, the safety function can no longer be ensured.
Keep the measuring tool clean and dry at all times to ensure proper and safe working.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.

If the measuring tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorized after-sales service center for Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the measuring tool.

After-sales Service and Customer Assistance Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. exploded views and information on spare parts can also be found under: www.bosch-pt.com
Our customer service representatives can answer your questions concerning possible applications and adjustments of products and accessories.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com

Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88

Australia, New Zealand, and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au

Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za

KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com

People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service-Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 46 83 25 22
Fax: +62 (21) 46 82 86 45/68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id

Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: +63 (2) 870 3871
Fax: +63 (2) 870 3870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: +63 (2) 899 9091
Fax: +63 (2) 897 6432
rosalie.dagdagan@ph.bosch.com
Malaysia
Robert Bosch (S.E.A.) Pte. Ltd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: +60 (3) 7966 3194
Fax: +60 (3) 7958 3838
cheehoe.on@my.bosch.com
Toll-Free: 1800 880 188
www.bosch-pt.com.my

Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines)
Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
Bosch Service – Training Centre
2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway)
Prakanong District
10110 Bangkok
Thailand
Tel.: +66 (2) 6 71 78 00 – 4
Fax: +66 (2) 2 49 42 96
Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: +65 6571 2772
Fax: +65 6350 5315
leongheng.leow@sg.bosch.com
Toll-Free: 1800 333 8333
www.bosch-pt.com.sg

Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: +84 (8) 6258 3690 ext. 413
Fax: +84 (8) 6258 3692
hieu.lagia@vn.bosch.com
www.bosch-pt.com

Disposal
Measuring tools, accessories and packaging should be sorted for environmental- friendly recycling.
Only for EC countries:
Do not dispose of measuring tools into household waste!
According to the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national rights, measuring tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner.
Battery packs/batteries:
Do not dispose of battery packs/batteries into household waste, fire, or water. Battery packs/batteries should, if possible, be discharged, collected, recycled, or disposed of in an
environmentally friendly manner.
Only for EC countries:
Defective or dead-out battery packs/batteries must be recycled according to the guideline 2006/66/EC.
Batteries no longer suitable for use can be directly returned at:

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Subject to change without notice.

Documents / Resources

| BOSCH PLL 5 Laser Spirit Level with Wall Holder [pdf] Instruction Manual
PLL 5, Laser Spirit Level with Wall Holder, PLL 5 Laser Spirit Level with Wall Holder
---|---