TRAXXAS HKC21027-R00-6595 No-Prep Drag Racing Start Light Instruction Manual

TRAXXAS HKC21027-R00-6595 No-Prep Drag Racing Start Light

Operating Instructions

DRAG START LIGHT COMPONENTS

BATTERY INSTALLATION

STARTING A RACE (AUTOMATIC LIGHT SEQUENCE)

1. ACTIVATE THE LIGHT SEQUENCE Switch on the Drag Start Light (status LED is green). Press the Start Button; the status LED will turn off.
2. STAGE YOUR VEHICLEThe Countdown Light will blink for 10 seconds while racers get  into position,  and then shine solid.
3. GET READY Once the Countdown Light stops flashing, the Start Light will illuminate at a random time between 1 and 6 seconds to start the race.

USING THE DRAG START LIGHT WITH THE OPTIONAL WIRELESS REMOTE

Bind the Wireless Remote to the Drag Start Light Unit

1. Press and hold the Start Button on the  Drag Start Light unit for 3 seconds; the status LED will blink green.
2. Press and release either the Countdown or Start Button on the wireless remote. The status LED will turn sold green to indicate that the unit and remote are now bound and ready for use.

MANUALLY STARTING A RACE USING THE REMOTE

1. Press and release the Countdown Button on the remote. The Countdown Light will illuminate (not flashing).
2. Press the Start Button to illuminate the Start Light and start the race.
3.  The Start Light will remain on until the Start Button is released.

STARTING THE AUTOMATIC LIGHT SEQUENCE USING THE REMOTE

1. Press and hold the Countdown Button on the remote for 3 seconds.
2. The automatic light sequence will start on the drag start light unit.

TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>