Barlus POE 5MP CMOS Lens Underwater Camera User Manual
- June 16, 2024
- Barlus
Table of Contents
Shenzhen zhiyong Industry Co., Ltd.
Underwater Camera User Manual
POE 5MP CMOS Lens Underwater Camera
Camera exterior introduction
Precautions
- The wiring connector is not waterproof, please keep it dry.
- The front end of the camera is made of tempered glass, andcollision with glass is prohibited. (If you need sapphirematerial, please contact technical support to customize thecamera)
- During use, the photosensor switch and camera glass needto be cleaned regularly to prevent microbial growth.
VMS Login and Help
Download software center:
https://barluscam.com/pages/dowanload
Technical support E-mail: sales2@barluscam.com
For a better experienceWe recommend using the software to watch the video.
Browser access to camera page version is too old:)
All software and instructions on the U diskIf you need other services, please
contact us.
Note: Support windows, Mac, computer software, mobile APP, NVR, all PTZ
control.
Windows-VMS Software
MAC——-VMS Software
Default Account: admin
Default Password: The default password is empty Note: After downloading
VMS, the account name and password will be auto-populated when logging in.
You can just click login directly.If you want to change the login password you
can change it in VMS.
IP Camera default IPaddress: 192.168.1.10 (Before use, check the LAN
IP)Default Account: admin Default Password: The default password is emptyTCP
Port:34567,HTTP Port:80,ONVIF Port:8899(Access other software and NVR)
Introduction to Tools
- The supporting tools: NVR/IPC equipment of some of the peripheral software, plug-ins, and ot-her tools.
- Manual: all series of instructions on the use of the products, supporting the use of tools that,Mobile phone monitoring software installation pack-age, SDK setups, etc.
- The VMS is the client monitoring software, can undertake client video, remote monitoring,Equipment centralized management
- Diskplayer player, can play computer hard disk video recorder file department All video files
- Ie plug-in, after installation can through the ie remote access equipment
- Player Player, h. 264 video files of the Player
- DeviceManages, can for NVR, IPC, such as equipm-ent NVR software DeviceManages 8.SDK setups
- For mobile viewing, you can search and download “XMEYE” from your cell phone’s APP store, and for iphone users, download “XMEYE pro”.
Connection Instructions
Barlus underwater cameras are all ip cameras. The IP address of the camera needs to match the IP address and gateway of your computer or LAN to connect properly.
-
The camera connects directly to the computer using an Ethernet cable
When connected directly to the computer. The ip address of your computer needs to be set to match that of the camera.
Refer to the right figure, camera IP address: 192.168.1.10Then the static IP address of the computer will be: 192.168.1.xx (x can be any number, just the first three parts are consistent)The gateway is fully aligned -
Camera connected to the router
When connecting to your router, you need to check that the IP address of the camera matches the IP address of your WIFI. If it does not match, you need to change the IP address of the camera.Can be modified in VMS
As shown in the picture. If you check the IP address information of your
wifi:| Then the camera’s ip address information should be:
---|---
192.168.1.5| 192.168.1.xx
255.255.255.0| 255.255.255.0
192.168.1.1| 192.168.1.1
How to change the IP address of the camera
As shown. After searching for the camera’s ip address, if the camera’s IP
address does not match your router’s ip address or gateway. Please change the
camera’s ip address here.
Camera Lighting Control Guide
Lighting control is via this PTZ control panel.
- Direction right: set the white light control method
- Direction left: set the infrared light control mode
- Direction Up: Set the light intensity to increase
- Direction Downward: Set the light intensity to decrease
Lighting status judgment
Taking pictures as an example. This character represents the current light
state as:
The manual mode of the infrared light has a brightness of 0%. The temperature
of the camera is 29 degrees Celsius.
Character Definition
R: Infrared light W: White light M: Manual mode A: Automatic mode 0: Light
zero degree level (1-10)T29: Camera temperature 29 degrees Celsius
Q&A
Q: How to turn on the automatic mode of white light?
A: As shown in the above figure, the arrow to the right switches to the white light. Just click the arrow to the right and observe if the character in the bottom right corner changes to W (white light). The white light is divided into automatic mode and manual mode. If you click once to go to the manual mode (M) of the white light, clicking the arrow to the right again will switch to automatic mode(A).
Q:How to turn off lights?
A:The lights need to be adjusted to manual mode in order to be turned off. Switch to manual mode of any mode. Click the down arrow again to adjust the brightness to 0 If you want to maintain this setting even after the camera is powered off and restarted. Then it needs to be saved(Preset point input 250 save)
Preset point commands applicable to this camera:
1.1 White light and infrared light settings
Preset 150: Light Enhancement
Preset 151: Lights down
Preset 152: White Light/Auto/70%
Preset 153: white light/manual/OFF
Preset 154: IR/Auto/70%
Preset 155: IR light/manual/OFF
1.2 Preset 233: Turn character overlay on/off(Cancel character display)
1.3 Save and restore camera light settings
Preset 250: Save lighting settings
Preset 251: Restore the default state of lighting settings
How to remotely access the camera
The prerequisite is that the camera needs to be connected to the router
- VMS remote access camera
Let’s say your webcam is at home when your laptop is connected online. But
you’re on a business trip or traveling with your laptop and you want to turn
it on to see how your koi is doing.
When you turn on your laptop,
you will find that the camera that was connected online is no onger online.
Then you can use the add method on the left side. You need to know the cloud
ID, IP address and password of the camera in advance. Please note that you
need to check if you have entered it incorrectly.
Note: Whether or not you can access remotely needs to be checked first to
see if the cloud status is successfully connected.
How to access the camera from a cell phone
Note: When the camera is connected directly to a computer using an
Ethernet cable, the phone cannot access the camera.
So, the camera needs to be connected to a router. Only then both computer and
cell phone can access the camera.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>