76 PROJECTS ASS SLIDER Anti Strap System for Top Tube Bags Instructions
- June 5, 2024
- 76 PROJECTS
Table of Contents
76 PROJECTS ASS SLIDER Anti Strap System for Top Tube Bags
WHATS INCLUDED
- Bike sider slider
- Bag sider slider
- Adhesive pad
- 2*Washers
- 2*Thumbnats
BIKE SLIDER – ADHESIVE
APPLY IN A WARM, DRY ENVIRONMENT. ENSURE SURFACES & HANDS ARE GREASE FREE.
REMOVE BY GENTLY HEATING WITH A HAIR DRYER.
- Apply adhesive pad firmly pressing all areas.
- Mark a center line on top tube
-
Slide onto bag. (Removal may require a lot of force)
-
Place on bike. Mark a line the front of the bracket.
Slide bracket off {may require a lot of force)
-
Peel back film, align front edge and press firmly.
-
Ensure alignment. pull away the rest of the film and press firmly
-
For non uniform and narrow tubes we advise to hold in place with tape whilst curing
BIKE SLIDER – DIRECT MOUNT
- Push out hole plugs using a blunt tool.
- Secure in place using supplied screws and 3mm Allen key.
MEASURE TWICE, STICK ONCE! CURE FOR 24 HOURS.
Documents / Resources
| 76
PROJECTS ASS SLIDER Anti Strap System for Top Tube
Bags
[pdf] Instructions
ASS SLIDER, Anti Strap System for Top Tube Bags, ASS SLIDER Anti Strap System
for Top Tube Bags
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>