Shenzhen Xinjuhuang Electronic Technology M10 Wireless Mouse Installation Guide
- June 5, 2024
- Shenzhen Xinjuhuang Electronic Technology
Table of Contents
WIRELESS MOUSE
QUICK INSTALLATION GUIDE
Product introduction
Method of use
-
System switching Windows / Mac
The LOGO indicator indicates the system. The default system is WIN
Long press for 5 seconds —–LOGO blue light on for 30 seconds —- WIN system
Long press for 5 seconds —-LOGO green light for 30 seconds —- OS X system
Tip: Please switch to the corresponding system when using the mouse.
For example, 2.4G connected to Windows (it is the default system does not adjust)
Multi-task window: Windows click to pop up several small
Windows to quickly select the window you want, with the scroll wheel to scroll down to find recently used software and files.
Mac: Press to select the software to open
One-click Desktop Windows: One click to quickly return to the desktop, another click to restore the previous window.
One-click Desktop Mac: When all applications are Max, press to display the desktop and then click the desktop to quickly return to the desktop, move the cursor up to the top to select the software to open, and then press to restore the previous window. -
2.4G Wireless Connection (red light)
1. Take out the receiver from the mouse (USB receiver bin) and insert it into the USB interface of the computer (device).
2. Within a distance of more than 30cm from the mouse receive, switch the mouse power switch to ON (switch to ON/ until the mouse is connected), and then press the mouse button at will to touse it
Other features:
DPI/ lamp control adjustment
Short press DPI to adjust the LOGO indicator to blink 1000- blink twice
1600(default)- blink three 2400- blink four 3200- blink five 4000
RGB lamp control adjustment hold down the DPI button for 5 seconds to switch
12 equivalency
2.4 Wireless
When the 2.4g wireless mode is well connected, you can freely switch the
device you want to connect according to your needs. Press the mode switch to
select the device you want.
Shut down the mouse
When the mouse is not used temporarily, you can turn the toggle switch to the
(OFF) position to turn OFF the mouse power, which can save power and mistress.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>