LUMME LU-3628 Hot Plate User Manual
- June 10, 2024
- LUMME
Table of Contents
LUMME LU-3628 Hot Plate
Product Information
- Model: LU-3628
- Power supply: 230 V ~ 50 Hz
- Power: 1900 W
- Net/Gross Weight: 0.82 / 0.93 kg
- Burner diameter: 14 m
- Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA
- Made in China
Parts list
- Stainless steel housing
- Burner
- Heating indicator
- Temperature control switch
Important Safety Instructions
When using the appliance, please follow these important safety instructions:
- Read this manual carefully before using the appliance and save it for future reference.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use a hot plate for drying clothes, papers, or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to disassemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact the service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
Before the First Use
Before using your Hot plate for the first time, please follow these instructions:
- Remove all packing material from the appliance.
- Turn the Hot plate on the highest position 3 for 5-10 minutes to condition the protective coating. This should be the only time the hot plate is turned on without a cooking utensil on it.
- Some parts of the cooking plate have been slightly greased and as a result, the unit may slightly smoke when switched on for the first time. After a short time, this will cease.
Before using your Hot plate for the first time, turn the Hot plate on the highest position 3 for 5-10 minutes to condition the protective coating. This should be the only time the hot plate is turned on without a cooking utensil on it.
Instruction for Use
To use the appliance, please follow these instructions:
- Place the hot plate on a flat surface and plug it in.
- Turn the temperature control switch to the desired setting.
- Wait for the heating indicator light to turn off before placing a cooking utensil on the hot plate.
- Place the cooking utensil onto the hot plate and begin cooking.
- After cooking, turn off the hot plate and unplug it from the power supply. Allow the unit to cool down completely before cleaning.
- Place the appliance on a flat, stable surface, able to hold its weight with the food to be cooked on it.
- Turn the temperature control switch to “0” (OFF).
- Plug in the appliance.
- Turning the temperature switch, choose the necessary heating mode: from 1 (slow heating) to 3 (the highest temperature available).
- The light indicator will go off when the burner reaches the selected temperature and will cycle on and off to maintain the temperature.
- Cooking pots and pans should have a flat bottom, their dimensions should be identical to those of the burner.
- Switch the unit off or to a lower heating mode in good time to save energy. The burner will still emit intensive heat for a few minutes, which can be used to complete the cooking process.
- The cooking plate is equipped with a thermostat that prevents overheating. Nevertheless, you should always switch off the unit after cooking: turn the temperature control switch to the “0” position and unplug the appliance.
Cleaning and Maintenance
To clean the appliance, please follow these instructions:
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
Regular maintenance of the hot plate will ensure its proper functioning and longevity. Please ensure it is cleaned after every use and stored in a dry, safe place when not in use.
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
SPECIFICATION
- Model LU-3628
- Power supply 230 V ~ 50 Hz
- Power 1900 W
- Net/Gross Weight 0.82 / 0.93 kg
- Gift box dimension (L x W x H) 190 x 75 x 240 mm
- Burner diameter 14 сm
WARRANTY
THE WARRANTY DOES NOT COVER SUPPLIES
(filters, ceramic and non-stick coating, rubber seals, etc.) The production
date is available in the serial number located on the identification sticker
on the gift box and/or on the sticker on the device. The serial number
consists of 13 characters, the 4th and 5th characters indicate the month, and
the 6th and 7th indicate the year of device production. The producer may
change the complete set, appearance, country of manufacture, warranty, and
technical characteristics of the model without notice. Please check when
purchasing the device.
Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165, RAINBOW
NORTH STREET, NINGBO, CHINA
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>