ANSMANN HD240BS Headlight User Manual

June 12, 2024
ANSMANN

ANSMANN logo HD240BS Headlight
User ManualANSMANN HD240BS Headlight HEADLIGHT HD240BS
OPERATION MANUAL
1600-0386

HD240BS Headlight

ANSMANN HD240BS Headlight - overview

ORIGINAL OPERATING INSTRUCTIONS

First unpack all parts and check that everything is there and that nothing is damaged. Do not use damaged products. If you find damage on the product, contact your dealer.
SIGNS AND SYMBOLS
Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging.
= Information: Useful additional information about the product
= Note: This note warns you of possible damage of all kinds
**** = Warning: Attention – Danger! May result in serious injury or death

PROPER INTENDED USE

The device serves as a battery-operated, mobile light source. The product is intended exclusively for private household use and not for commercial use.
The light is not intended for any other applications. Not suitable for household room lighting. Read through the complete operating instructions carefully before using the product for the first time. They contain important information for handling the product.

  • If you pass on the product to third parties, pass on these operating instructions as well.
  • Never expose the product to extreme conditions (extreme heat/cold).
  • Do not immerse the product in water
  • Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product.
  • This product is not to be used by persons (including children) who have restricted physical, sensory or mental capabilities or who do not have adequate experience and knowledge in handling this product. Such persons must be instructed beforehand by a supervisory person who is responsible for their safety or must be supervised during the use of the product!
  • The light source of this lamp cannot be replaced. If the light source has reached the end of its service life, the complete lamp must be replaced.
  • Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
  • Always keep the product dry.

**   Note:**

  • This product contains batteries. Do not throw the product into a fire
  • Improperly inserted batteries could leak and/or cause a fire/explosion
  • Always change all of the batteries at the same time as a complete set and always use equivalent batteries
  • Keep batteries away from children: Risk of choking or suffocating
  • Never try to open, crush or heat a battery or set it on fire
  • Do not use the batteries if the product appears to be damaged
  • Batteries are not rechargeable
  • Always dispose of used batteries & rechargeable batteries in accordance with the local regulations and requirements.
  • In the event of battery leakage, do not touch. If you come into contact with battery fluid, wash the affected area thoroughly and immediately with plenty of water
  • If the battery fluid has caused a skin reaction or has come into contact with your eyes, contact a medical professional immediately
  • Do not short-circuit the batteries!
  • The use of rechargeable batteries and high-current batteries is not permitted due to other electrical characteristics.
  • Remove used or empty batteries from the lamp immediately
  • If the lamp is no longer to be used, the batteries must be removed from the lamp before it is disposed of

SAFETY INSTRUCTIONS

  • Do not look directly into the light beam. Do not shine the light in other people‘s faces. If this occurs for too long, the blue light portion of the beam can cause retinal damage.
  • The product is categorised as protective class III and thus operates with a non-hazardous voltage range.

INSERTING THE BATTERIES

When inserting batteries, ensure that the batteries are inserted with the correct polarity. Switch the product off before changing the batteries.

CARE AND MAINTENANCE

Cleaning

  • Carry out cleaning tasks only when the mains plug has been pulled out / when the power supply has been disconnected
  • Clean only with a slightly damp cloth, then rub it dry
  • Do not use abrasive agents or solvents for cleaning.
  • Never submerge the product in water or other liquids.
  • Do not allow fluids to enter the housing.
  • Do not use hard brushes or sharp objects for cleaning.

Maintenance
If the product is not going to be used, remove the batteries and store separately in order to preserve service life.

DISPOSAL

Dispose of unserviceable lamps in accordance with legal provisions. The „waste bin“ symbol indicates that, in the EU, it is not permitted to dispose of electrical equipment in household waste. Use the return and collection systems in your area or contact the dealer from whom you purchased the product. For disposal, pass the device on to a specialist disposal point for old equipment. Do not dispose of the device via household waste as the device contains batteries / rechargeable batteries. In this way you will fulfil
your legal obligations and contribute to environmental protection.

LIMITATION OF LIABILITY

The information contained within these operating instructions can be changed without prior notification. We accept no liability for direct, indirect, incidental or other damage or consequential damage arising though improper handling or through disregard of the information contained within these operating instructions.
We accept no liability or warranty claims or guarantee claims in the event of incorrect use of the product.

DELIVERY INCLUDES

1x Lamp
3x AAA batteries
1x Operating instructions

PRODUCT DESCRIPTION

  1. Main LED
  2. COB-LED
  3. Sensor
  4. Functions button
  5. Sensor button
  6. Battery compartment

OPERATION

The lamp is switched on and off by pressing the on/off button.
The lamp can be suspended using the fold-out hanging eye, fastened in place with the mounting magnet or used with the clip.
Various lighting positions can be achieved thanks to the 180° swivel joint.

TECHNICAL DATA

Illuminant:| Main light: 3W SMD LEDs
Auxiliary light: 1W SMD LED
---|---
Risk group:| 2
Power supply:| 3x AAA alkaline batteries LR03 (included)
Protection class:| III
Luminous flux:| Main light: 240lm | Auxiliary light: 105lm
Battery life:| Main light: 4h | Auxiliary light: 12h
Light range:| Main light: 45m |  Auxiliary light: 19m
Housing material:| ABS plastic
Protection type:| IP20
Storage temperature:| -10 to 50 °C
Operating temperature:| -10 to 25 °C
Weight:| 53g (without batteries)
Dimensions:| 175 x 31 x 21mm

The product complies with the requirements from the EU directives.
**** Subject to technical changes. We assume no liability for printing errors.

ANSMANN logo Customer service: ANSMANN AG
Industriestrasse 10 97959 Assamstadt
Germany Hotline: +49 (0) 6294 / 4204 3400
E-Mail: hotline@ansmann.de
MA-1600-0386/V1/03-2020

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals