ARTECK MW167 Wireless Mouse User Manual
- June 5, 2024
- ARTECK
Table of Contents
ARTECK MW167 Wireless Mouse User Manual
Welcome
Thank you for choosing this Arteck MW167 wireless mouse. To ensure optimum performance and safety, please read these instructions carefully before operating this product. It is strongly recommended you keep the manual for future reference.
Product Specifications
Wireless Specification
|
2.4G USB Wireless
---|---
Operating Range
| Up to 10 Meters
Moldulating System|
GFSK
Operating Voltage
|
3.0-4.2V
Operating Current
| <2.5mA
Standby Current|
0.3-0.5mA
Sleeping Current
| <40uA
Charging Current|
200uA
Standby Time
| >100 days
Charging Time|
2 hours
Input Voltage
| 5V
Uninterrupted Working Time
|
64 hours
Battery Style
|
USB Rechargeable
3.82035mm
Lithium Battery Specification
Key Strength|
50-80g
Key Life|
3 million strokes
Package Content
- Arteck MW167 Wireless Mouse *1
- USB receiver (stored inside the back of mouse) *1
- USB-C charging cable *1
- User manual *1
Getting Started Guide
Product Overview
- Mouse ON/OFF Slide Switch
- Mouse DPI Switch: Press the button to switch the DPI between 800/1200/1600/2000/2400 DPI.
- Backward Button: Control to backward in web or folder.
- Forward Button: Control to forward in web or folder.
- Windows Switch Button: Press the button to switch between different windows.
- Mouse Indicator: Lights up red for about 3 secs when being turned on. Red light will turn on when the mouse is charging and turn to green after full charged. Flashing when in pairing mode. Flashing when the battery of the mouse is low. DPI indicator: After pressing the DPI button, the indicator will be changed between 800/1200/1600/2000/2400 DPI. When the mouse indicator flash one time after pressed, the mouse is 800 DPI, flashing 2 times means DPI is 1200 DPI, flashing 3 times means 1600 DPI, flashing 4 times means 2000 DPI, flashing 5 times means 2400 DPI.
- USB-C Charging Port: Used for charging the mouse.
- USB Receiver: The USB receiver is stored at the back of the mouse, which is required to insert to the USB port.
DPI Key
Press the DPI key, the indicator will be flashing. The indicator flashing 1 time means the DPI change to be 800 DPI, the cursor motion speed will be slow. Press the DPI key again, the indicator will be flashing. The indicator flashing 2 time means the DPI change to be 1200 DPI, the cursor motion speed will be a bit faster. Press the DPI key again, the indicator will be flashing. The indicator flashing 3 time means the DPI change to be 1600 DPI,the cursor motion speed will be medium. Press the DPI key again, the indicator will be flashing. The indicator flashing 4 time means the DPI change to be 2000 DPI, the cursor motion speed will be much faster. Press the DPI key again, the indicator will be flashing. The indicator flashing 5 time means the DPI change to be 2400 DPI, the cursor motion speed will be the fastest.
Steps of Pairing with Your Computer
- Step 1: Turn on the switch at the back of the mouse.
- Step 2: Insert the USB receiver (stored inside the back of the mouse) to the port of your computer. It will auto pair to mouse. You are able to use the mouse right now.
Notice: If you are not able to connect the mouse to your computer, please kindly contact with support@arteck.com for assistance. We will solve your issue with 100% satisfactory solution.
Charge the Battery of the Mouse
Turn on the Wireless Mouse.
The mouse power indicator light (red) will illuminate for 3 seconds and then
turn off to save power. Your mouse is still on. If the mouse indicator keep
blinking or the mouse is not working, it means the mouse is out of power, you
need to charge the mouse.
- Plug the USB-C charging cable into the mouse at the top.
- Plug the USB plug on a computer or any cellphone USB power adaptor.
- Charge for 2-4 hours, or until the indicator of the mouse become green.
Caution:
- When not in use for a prolonged period, it is recommended that you turn off he mouse to lengthen battery life.
- When the power status light flash, it is recommended that charging the mouse in 2 hours.
Energy-saving Sleep Mode
Mouse’s long life battery lasts for several months of normal use. The mouse will go into sleep mode if left on and not being used; press the button on the mouse and wait a second or two to bring it out of sleep mode. The mouse won’t be able to move the cursor while in sleep mode, you need to press the button on the mouse to wake it up then it will be able to move.
Safety Caution
- Keep the item away from sharp objects.
- Do not place heavy object on the mouse.
- Away from microwave items.
- Do not force or distorted the mouse.
- Keep away from oil, chemical or other organic liquid.
Cleaning
Clean the mouse with water, alcohol or alcohol based disinfectant.
Troubleshooting
- Make sure the mouse is on (slide switch in “ON” position).
- Make sure the mouse is in operating distance (within 10 meters).
- Ensure the battery storage has power.
- Make sure the USB receiver is plugged to the PC correctly.
- If you are not able to move the cursor, please press the button to wake up the mouse.
Warranty
Our company provides customers with a warranty of 24 months from the date of purchase.
2 Years Warranty Clam:support@arteck.com
Contact Us
For any inquires or comments concerning our products, please send an email to support@arteck.com, and we will respond to you as soon as possible. If there is any quality-related issue with the product, you may request a replacement or refund by submitting a request to support@arteck.com.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>