Arteck HW086 2.4G Wireless Keyboard User Manual

Arteck HW086 2.4G Wireless Keyboard

Thank you for using the BOW keyboard, please read the usage specification carefully before you use it.

Product Description

1. Power Turn On: When sliding on-off to left, turn off when sliding on-off right.
2. Power Supply Pilot Lamp: the pilot lamp will be green for at most 5 seconds when turning on the power, then extinguish. Capital and small letter pilot lamp: click the CAPS LOCK keycap to cut the capital and small letter. When the pilot lamp is blue, it is in capital form.
3. MICRO Battery Charging Joint: only for keyboard
4. Battery Charging Pilot Lamp: when charging, the lamp is red, when saturated, the lamp is green. Unpin the line of charging, and the lamp extinguished.

The Keyboard of Shortcut Key

Code Connect

Remarks: all of those keycaps of the shortcut key must use with the FN keycap together, like Fn+ (except the code connect key)

The Keyboard Characteristic

1. Exclusive using can adapt to tablet PC, all-in-one computers, table model computers, and so on.
2. It has an adapter conceal function, so, it is easy to carry with you when you go out.
3. Adapting many ways about code connect, only click the ESC+Q, and the keyboard work in code connect.
4. All in one pothook style and scissor-foot style structure, so the vigor of clicking the key is light and the keycaps are high smooth and steady.
5. The keycap’s design by ergonomics changed the feeling of your fingers by touching the keycaps, and the R angle of the keycaps improves the visual effect.

The Parameter of the Keyboard

1. Starting Up Current
2. Waiting Current
3. Sleeping Current
4. Sleeping Time
5. Working Current:  Cap for on
6. Awaken Current
7. Awaken Ways
8. Battery Parameter: lithium battery 3.7V 280mah
9. Key life: 3 million strokes
10. Working temperature

Safety Hint

Warning: if you do not the way of safety state, you will get fire breaking out, electric shock, breakdown of the keyboard, and so on.
Danger (take care of high temperature)
Warning: (take care of danger)
Attention: (notice about the little dangerous things)

1. Keep away from edge tool
2. Keep away from radiation like microwave
3. No extruding
4. No shocking, no curving
5. Keep away from oil, chemicals and organic solvent.

Usage Steps

1. Install 2-AAA into a mouse, acceptor connect with the computer, click the middle and right keys together, and then 3 seconds later, the Bluetooth will pair.
2. Turn on the back power on-off, the lamp will last green 5 seconds and then extinguish.
3. clicking the ESC+Q, the power lamp will glint, the keyboard Bluetooth searching, pull out the adapter and then insertion ( the distance between keyboard and adapter is closer better), when the keyboard searched the adapter, the power of the lamp will glint faster. When pairing succeeds, the lamp will extinguish.
   Remarks: Pairing succeeds, when you use it next time, you can only install a 2.4G mouse into the computer, the keyboard will connect by itself. Do not need to pair steps.

Battery Charging

When the battery electric quantity is not enough, the lamp will glint green, charging at now.

1. Connect the original USB of the B port to the keyboard charging.
2. Connect the USB of the A port to the power adapter or the computer of the USB port.
3. When charging, the side of the lamp will be red all time. Extinguish when equilibration.

Wireless technology, infinite life Ergonomics keyboard and mouse suit

Support

Shenzhen Hastech Industries Co., Ltd Hastech Technology Park, G Area, Democracy West Industry park Shajing Baoan District Shenzhen China
Web: www.bow.cn
Hastech QQ group about the exchange of skills: 211705564 Nationwide service volume line: 400-682-8008

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part  15  of the  FCC  rules.  Operation  is subject  to  the  following  two  conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Changes or to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQs

Why is the keyboard of the FN keycap not blue?****

This is the feature of the FN keycap, it is not blue.

Why is the battery charging joint, not in the middle of the keyboard?****

Because that position is a little bit inconvenient to use.

Why does the keyboard have a battery charging joint?****

This function can protect your computer from being damaged by overcurrent and overvoltage.

Why does the keyboard have a MICRO battery charging joint?****

Because it can protect your computer from being damaged by overcurrent and overvoltage

What is the difference between MICRO and MINI?****

MICRO has a charging line, MINI doesn’t have it.

Are 2.4 GHz keyboards secure?****

Even some 2.4GHz keyboards will be safe if you can locate specific models that embed encryption into their signal; though this can be a challenge to locate. For better or worse, KeySweeper is another example of the concerns raised by the use of wireless technology.

How does a 2.4 GHz wireless keyboard work?****

Wireless keyboards based on infrared technology use light waves to transmit signals to other infrared-enabled devices. But, in the case of radio frequency technology, a wireless keyboard communicates using signals which range from 27 MHz to up to 2.4 GHz. Most wireless keyboards today work on 2.4 GHz radio frequency.

Is 2.4 GHz keyboard the same as Bluetooth?****

First, you may be wondering if 2.4 GHz and Bluetooth are the same thing, as you may have heard people use these terms interchangeably. The answer to that is no, not exactly. Bluetooth uses 2.4 GHz. Bluetooth is a standard wireless communication protocol.

What is the range of a 2.4 GHz keyboard?****

2.4 GHz wireless keyboard and mouse use from up to 33 ft.

How far can a wireless keyboard reach?****

While the average range for a Bluetooth keyboard can top out at around 30 feet, an RF wireless keyboard can meet or exceed that distance depending on the receiver type.

How do I set up a 2.4 g keyboard?****

Remove the 2.4G USB receiver from its location on the keyboard’s backside, Plug the USB receiver into an available USB port of the computer. Install the 2 x AAA batteries (not included), and turn on the power switch from the mouse’s backside. 2. Turn on the power switch of the keyboard, it will be connected within 3 seconds.

Do wireless keyboards need software?****

Installing the software is required for full functionality. The driver for the wireless transceiver (the little dongle that you plug into a USB port) should install automatically when you plug it in.

Download The PDF Link;Arteck 2.4G Wireless Keyboard pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>