KLARSTEIN 10034118 Dryfy Pro Connect Dehumidifier Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
- KLARSTEIN 10034118 Dryfy Pro Connect Dehumidifier
- TECHNICAL DATA
- SAFETY INSTRUCTIONS
- NOTES ON REFRIGERANT R290
- PRODUCT DESCRIPTION
- CONTROL PANEL AND KEY FUNCTIONS
- USE AND OPERATION
- CARE AND CLEANING
- DEVICE CONTROL BY SMARTPHONE
- TROUBLESHOOTING
- DISPOSAL CONSIDERATIONS
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KLARSTEIN 10034118 Dryfy Pro Connect Dehumidifier
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual
carefully and take care of the following hints to avoid damages. Any failure
caused by ignoring the items and cautions mentioned in the instruction manual
is not covered by our warranty and any liability. Scan the QR code to get
access to the latest user manual and other information about the product.
TECHNICAL DATA
- Item number 10034118 10034119
- Power supply 220-240 V ~ 50 Hz
- Water tank capacity 4 L
- WiFi standard 802.11 b/g/n
- WiFi frequency 2,4 GHz
- WiFi radio-frequency power (max.) 20 dBm
SAFETY INSTRUCTIONS
- If the machine`s power supply cord is damaged, you must entrust the manufacturers of the machine. Maintenance service center or qualified technicians will change for you, in case of any danger.Lassen Sie das Gerät vor dem ersten Betrieb 2 Stunden lang stehen, bevor Sie es einschalten.
- Leave the appliance to stand for at least two hours before power on, especially after transportation.
- Make sure that the voltage matching with the relevant data indicated on the rating label.
- The socket must be with grounding.
- Keep the appliance dry. Make sure no water on the top or the body. Do not unpin the plug when the appliance is working.
- If moving needed, please switch it off and unpin the plug. Allow a free space of 15 cm around air inlet of the appliance. Do not insert any object into the air inlet or outlet openings.
- Do not place the dehumidifier near a heating source (esp. a radiator) or indirect sunlight.
- Ensure that the appliance does not become hot.
- Empty the water tank regularly. (In extreme conditions the water tank may be full after a few hours of operation.) Clean the air inlet filter if it becomes contaminated: the appliance is most effective when
- the filter is clean.
- Please do not expect the air dehumidifier to be effective when too many doors or windows are opened or when something in the room is producing a lot of humidity. The air dehumidifier will come into effect immediately. However, the reduction of humidity many hardly be measurable during the first few days.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have beeen given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
NOTES ON REFRIGERANT R290
Warnings
-
The air conditioning system must be kept and transported upright. Otherwise, irreparable compressor damage may occur. Leave the unit for at least 24 hours before putting it into operation.
-
Switch off the device and disconnect it from the power supply before cleaning.
-
Make sure that the product creates a steady stream of air. Ensure the air inlets and outlets are not blocked.
-
To prevent leaks, operate this unit on a horizontal surface.
-
Any person performing work on a refrigerant circuit should have a current
certificate from an industry-accredited assessment body. This ensures competence in the safe handling of refrigerants according to an industry- recognized assessment specification. -
If the device stops working, dispose of it properly.
-
Store the device in a well-ventilated place when not in use.
-
Store the device so that it is not damaged.
-
Repairs may only be carried out by the manufacturer or an authorized specialist company.
-
The cables connected to the device may contain potential ignition sources.
-
Do not damage any components of the refrigerant circuit. Escaping refrigerant may not be noticed because it is odorless.
-
Maintenance and repairs must be carried out under the supervision of specialists in the use of flammable refrigerants.
Information for rooms with refrigerant pipes
- Limit the piping to a minimum.
- Be careful not to damage the piping.
- Appliances with flammable refrigerants may only be installed in a well-ventilated room.
- Comply with national gas regulations.
- All mechanical connections must be freely accessible for maintenance purposes.
PRODUCT DESCRIPTION
- Louvers
- Handle
- Air outlet
- Lamp
- Wheels
- Control Panel
- Prefilter / Activated Carbon Filter
- Air inlet
- Continuous drain port
- Back cover
- Water tank
CONTROL PANEL AND KEY FUNCTIONS
Key functions
USE AND OPERATION
Carbon filter (Teodor function) Take out the carbon filter from the bag and insert it into the filter. See the picture below. Suggest changing the carbon filter every 3 months, it always keeps the room fresh.
Emptying the water tank
Empty the water tank regularly when full, the air dehumidifier turns off automatically and the tank full indicator is turned on
- Open the front cover of your device.
- Hold the water tank by its handle.
- Pull it out carefully.
- Empty the water tank.
- Return the empty water tank to its position after wiping it off from any water residue.
Continuous drainage operation
Your device has a drainage port that allows you to have continuous drainage. Connect a 10mm diameter PVC pipe (optional – not provided in the package) with the drainage port located on the back part of the unit, for continuous drainage purposes, as below figure. Ensuring the hose is directed downwards, allowing water to flow by gravity to an external drain. Ensure that the end of the hose is lower than the drain opening, otherwise, the water will not drain and flooding may occur.
Replacement and maintenance of air filter
When used regularly, the filter may become clogged with dust and particles.
Therefore the filter should be cleaned every one or two weeks. Follow these
steps
- Remove the filter by pulling it out carefully.
- Clean the filter with a vacuum cleaner or with water. Tap the filter to remove excess water and let it dry completely. Once you make sure that your filter is completely dry, reinstall it on your device. Do not wash your filter in the dishwasher and never use hair dryers or
General description
- The machine uses the temperature range of 5-35°C, please use the machine in this scope, (otherwise it will start the protection action, causing the machine automatically stop running.)
- At room temperature at 5※ and the absolute temperature of the environment is very low. It is not necessary to use the machine.
- When the machine is running, it will produce a small portion of the heat, the room temperature will be a little higher, this is a normal phenomenon, please feel at ease.
- If the unit automatically stops running, please send the water in the water drained, and put back to the water tank, the machine will continue to operate.
- In order to ensure the normal operation, do not open the water tank float cover, or place any foreign body in the water tank.
When the machine can not start or unknown cause, please check with the following steps:
- Check whether the plug or the power cord is normal.
- Above all is normal, just please re-start the machine after 10 minutes.
- If you are still unable to start, please contact the local dealer or the company‘s customer service department.
- Air inlet and outlet and the distance between the adjacent material to keep 15 cm above.
- After the machine is stopped, please restart in five minutes to make sure that the machine is used for longer service life.
- if a long time does not use the desiccant, please unplug the power plug.
- If the machine inlet frosting, automatically defrosts.
CARE AND CLEANING
- Do not put the body in the soft, uneven ground, in order to avoid vibration or sound.
- Do not use any fine rod, hard object into the body, so as to avoid failure or danger.
- Clean the body, gently wipe with a damp cloth, do not splash water, to avoid damage to electrical insulation.
- Do not put heavy or water body above the vase, items.
- Please stay away from the fuselage. The heat source side heaters to avoid danger and waste electricity.
- Please close the doors and windows when used to achieve the effect of the desiccant.
- Please clean filter once every two weeks (not to use 40 degrees above the hot water or alcohol, gasoline, toluene and other dangerous flammable liquid).
- After filtering the net, please do not dry in the sun, so as not to deformation.
- Around the body or out of the air outlet do not put items, to ensure that the effect of the desiccant air.
- Power failure or long-term nouse, please unplug the power cable plug, so as to avoid leakage, and fire.
- Before your moving the machine, pour out the water within the water tank.
- When not in use, please put in the position of ventilation, and unplug the power plug to avoid danger.
DEVICE CONTROL BY SMARTPHONE
If you integrate the device into your home WiFi, you can conveniently operate
it via the associated Klarstein app. The app not only allows you to remotely
control the device via your smartphone, but also gives you access to
additional information.
Follow these steps to connect your smartphone to the DryFy Pro Connect:
- Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
- Make sure your smartphone is connected to the same WiFi network that the Dry Fy Pro Connect is to be connected to.
- Open the Klarstein app.
- Sign in to your account. If you do not have an account, sign up in the Klarstein app. 5 Follow the instructions from the app.
App Download
Use the scan function of your smartphone to scan the QR code and save the app
on your smartphone.
Note: The app provides further information on how to use the app and helps on how to connect to your device as soon as you open it for the first time.
Turn the WiFi of the DryFy Pro Connect on and off
-
Turn on WiFi connection:
Press the WIFI button for 3 seconds to activate the wifi module inside the device. The WiFi icon will flash and the device will automatically search for other WiFi
devices in the area.
Note: The device will back to “–“ automatically 5 minutes after finishing the works, or no command input in 5 minutes after switching on the device. -
Switch off WiFi connection:
To turn off WiFi and restore default factory settings, simultaneously press the TIME (+) and TIME (-) buttons until the unit beeps. Once the WiFi icon disappears, the
connection is terminated.
For changes to the WLAN or connection problems
If you make changes to your WLAN (e.g., a password change), the device must
also be reconnected. Press the WIFI button for 3 seconds to activate the wifi
module inside the
device. The WiFi icon will flash and the device will automatically search for
other WiFi devices in the area.
- Open the Klarstein app.
- Open the device control of the DryFy Pro Connect.
- Follow the instructions from the app.
TROUBLESHOOTING
Error codes
- Code Description
- E1 Room temperature (ambient temperature) sensor for short circuit
- E2 Room temperature sensor open circuit
- E3 Humidity sensor short circuit
- E4 Humidity sensor open circuit
- E5 Coil sensor short circuit
- E6 Coil sensor open circuit
Problem | Possible Cause and Suggested Solution |
---|---|
The operation switch is “ON”,but the machine is not operation. | Is the water |
tank placed in the right position?
Is the power plug inserted right position?
Is the fuse broken?
Is the power off?
The dehumidification
amount is too low.
| Is the front filter net dirty?
Is the interior temperature and the humidity too low?
Is the air outlet and air inlet jammed?
Long time operation can not reach the suitable humidity condition.| Does the
door or window too widely open?
Is there any generated water evaporator?
Is the interior space too big?
When the machine is making huge noise.| Is the floor flat and hard?
Is the dehumidifier in the right position?
The lamp is
continuously on.
| Is the temperature or humidify sensor is damaged or
loosen?
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
DECLARATION OF CONFORMITY
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
- Chal-Tec UK limited
- Unit 6 Riverside Business Centre
- Brighton Road
- Shoreham-by-Sea
- BN43 6RE
- United Kingdom
The complete declaration of conformity of the manufacturer can be found at the following link: use.berlin/10034118
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>