LAZER Z1 MIPS Lightweight Road Bike Helmet Owner’s Manual

LAZER Z1 MIPS Lightweight Road Bike Helmet

Wearing a helmet may reduce the seriousness of many injuries to the head that may occur during sports-related accidents. For this reason, it is important to use this protective gear properly.

WARNING:

1. Any type of safety equipment has its limits. Please carefully read and follow these instructions

2. This helmet is only designed for the following activities : cycling, roller- skating and skateboarding. It is not designed to used during any other sport or on any other means or transportation such as mopeds or electric scooters.

3. Tris helmet has been designed 10 absorb the impact of a shock by deforming, which may possibly y lead to the compromise of the integrity of the inner shell. This carnage may no: be visible. A helmet subjected to severe impact should :therefore be discarded and destroyed, even if it seems to be in good condition from the outside.

4. A helmet does not protect the areas of the head thc.1 are not covered such as the face or neck. No helmet can  protect the user from all possible accidents when cycling. certain times of impacts, even during an accident at slow speed, could cause a serious or even fatal injury.

5. Always cycle with caution. Always control your speed and at all times ensure that you are able to make an emergency stop to avoid obstacles or other hazards. Avoid areas with heavy traffic and follow all the local, regional and national traffic ·regulations where you are eyeing. Keep your equipment in good condition and do not modify the helmet in any way.
   If you make any modifications, your safety could be compromised. Follow all safety n1commimdat1ons. Wearing a helmet should not push you to take any unnecessary risks and should not  in Any case prevent anyone from using caution, especially children and teenagers.

6. This manual contains important safety, fit, adjustment, and care information. Read i1 before you take your first ride, and keep it for reference. If you are a parameters or guardian and 1his helmet is for your child, please take the time to read this manual as you should make sure your child understands everything therein.

7. Your responsibilities regarding safety are no! limited to acting in line wi1h 1he previous points. In addition to these precautions, you should also be in good physical and mental condition when riding a bicycle. L)o not cycle while under the influence of alcohol or drugs.

Instructions for use:
To ensure maximum protection, the proper helmet size should be chosen for each user (make sure :here are no large empty spaces or pressure points).
To choose your size, measure the circumference of your head (from the forehead to the widest part in the back of your head) and select the size that corresponds to your measurement (in cm).

• No helmet can protect the wearer against all possible impacts.
• The helmet is designed to be retained by a strap under t1e lower jaw.
• To be effective, a helmet must fit an::l be worn correctly. To creek for correct fit, solace the helmet on your head and make any adjustments as indicated. Securely fasten the retention system. Turn the sizer adjustor on the back or top of helmet clockwise or anti-clockwise to find 1he fittest adjustment. Grasp the helmet and try 😮 rotate it lo the fron1 and rear. A correctly fi1ted helmet should be comfortable and should not move forward to obscure vision or rearward to expose the forehead.
• No attachments should be made to to the  helmet except those recommended by the helmet manufacturer
• The helmet is designed to absorb shock by partial destruction to the shell and liner. This damage may not be visible. Therefore, if the helmet is subjected to severe impact, it should be destroyed and replaced even if i1 appears undamaged.
• The helmet may be damaged and rendered ineffective by petroleum and petroleum products, cleaning agents, paints, adhesives and the like, without the damage being visible to the user.
• A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear or after 3 years
• This helmet should not be used ty children while climbing or doing other activities where there is a risk of hanging or stra1gulation if the child gets trapped whilst wear ng the helmet.
• This helmet is only designed for the following activities: cycling, roller-skating and skateboarding. It is not designed to be used during any other sport or on any other means of transportation such as mopeds or electric scooters.

WARNING

• The helmet should be properly adjusted on the head the straps should not cover your ears, the buckle should not be covering the chin and the buckle and straps should be firmly. but comfortably adjusted. The same applies to the adjustment around the perimeter of the head.
  

• The helmet Should always be securely attached to the head (chinstrap attached under the chin).

Check the adjustment before each use.

• Always take care of your helmet, even when you are not using it. Keep it away from any heat source and unnecessary sunlight, as this will affect the helmet material. Because prolonged exposure to sun rays weakens all plastic materials, it is recommended to replace your helmet at least every 3 years.
• To clean the outer shell, only use water and mild soap. Never use  the based products, solvents or other chemical substances. Let it dry in a well ventilated place. Do not make any modifications to :he helmet. Do rot varnish it or apply any coloring agents onto the helmet Do not remove or modify any of the original component parts of the helmet.
• The helmet is not suitable for the purpose of fitting accessories in a way not recommended by Lazer.

Please read the online manuals for detailed user instructions and warranty information: www.lazersport.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>