Goldair GD350 Portable Desiccant Dehumidifier 8L Instruction Manual
- June 5, 2024
- GOLDAIR
Table of Contents
- Goldair GD350 Portable Desiccant Dehumidifier 8L
- General Care and Safety Guide
- General Care and Safety Guide
- Operating Your Dehumidifier
- DEHUMIDIFIER CONTROL PANEL
- Trouble Shooting your Dehumidifier
- TECHNICAL SPECIFICATION
- Two Year Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Goldair GD350 Portable Desiccant Dehumidifier 8L
General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this appliance. Covering this appliance presents fire risk and will activate the safety fuse; permanently disabling the unit.
WARNING: Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 metre from the air outlet.
- Use only the voltage specified on the rating label of the appliance.
- Keep all objects at least 1 metre from the front, sides and rear of the appliance.
- This appliance is intended for household use only and not for commercial or industrial use.
- Indoor use only.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- Do not use the appliance if it has been dropped or damaged.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
General Care and Safety Guide
- Never use the appliance to dry clothes.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Do not use if there are visible signs of damage to the appliance.
- Do not connect the appliance to mains supply until completely assembled and adjusted.
- Ensure hands are dry before handling the plug or main unit.
- Ensure appliance is on a flat, stable, heat-resistant surface.
- Do not operate with cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
- Carry out regular checks of the supply cord to ensure no damage is evident
- Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.
- Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- It is recommended that this appliance is plugged directly into the wall socket. Powerboards are not rated to supply power to high wattage appliances.
- A correctly specified, an undamaged extension cord may be used with this appliance provided it is used in a safe manner.
- Do not remove plug from power socket until the appliance has been switched off.
- Do not remove plug from power socket by pulling cord; always grip plug.
- Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot be tripped over.
- Don’t place appliance on bedding or on thick & long carpet where the openings may get blocked.
- Switch off and use handle provided when moving
- Do not place appliance close to radiant heat source.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Do not sit on the appliance.
- Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
- Do not operate in areas where petrol, paint or other flammable liquids are used or stored.
- Do not use this appliance in the immediate surroundings of a bath, a shower, or a swimming pool or other liquids.
- The appliance must not be immersed in any liquids.
- There are no user-serviceable parts installed in the unit.
- Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
- If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team.
Operating Your Dehumidifier
Always choose a safe location for the dehumidifier, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the dehumidifier.
WARNING: Keep all objects at least 200mm from all sides of the appliance.
WARNING: Do not use this dehumidifier with a programmer, separate timer, remote-control system or any other device that switches the dehumidifier on automatically, since a fire risk exists if the dehumidifier is covered or positioned incorrectly.
WARNING: Never leave this dehumidifier unattended. Ensure the dehumidifier is on a flat, stable, heat-resistant surface. Once the dehumidifier is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket. A partially inserted plug will overheat the plug and socket and could result in fire.Leave the appliance to stand for one hour after transport or after the unit has been on its side before connecting it to the mains supply to let the refrigerant settle. Ensure all external windows and doors are closed before turning on the unit. Ensure that the water container is positioned correctly.
DEHUMIDIFIER CONTROL PANEL
OPERATION
Ensure that the water container is positioned correctly. Ensure all external
windows and doors are closed before turning on the unit. Plug into power
supply and switch on at the mains. Press POWER button and the unit will start
in continuous dehumidification mode. (The POWER button also allows you to turn
the unit Off).Note that if the appliance has been operating for more than 10
minutes when you switch it off it will change to CONTINUE mode and run for
approximately 5 minutes to cool the unit before switching off.
SPEED
Select the desired fan speed by pressing the SPEED button. L (Quietest
dehumidification) setting. M (Normal dehumidification) setting. H (Fast
dehumidification) setting. The HUMIDITY will default to Continuous. This
cannot be adjusted in high speed.The LED indicator light will illuminate to
identify the current status.
HUMID FUNCTION
The appliance will default to continuous operation when it is first turned
on.You can only adjust the humidistat when the fan speed is in medium or low.
Room humidity ratio (60%/50%/40%) can be set by pressing the Humid button.
- When 40% is set: The humidistat will detect if the room relative humidity (RH) is lower ≦38% and the unit will automatically turn the dehumidification process off. The LED light shows that the 40% will also go out.
- When 50% is set: The humidistat will detect if the room RH is lower ≦48% and the unit will automatically turn the dehumidification process off. The LED light showing that the 40% will also go out.
- Like wise for the 60% setting.
NOTE: The fan will continue to run to draw air over the humidistat to sense when the humidity changes. The CONTINUE setting will attempt to remove all humidity from the room.
AIR ANGLE
The louvre automatically turns to the upright position when the appliance is
first switched ON.Press “AIR ANGLE” button once and the air louvre will move
from 90° upright position to 45° to aid clothes drying; the LED will
illuminate. The louvre will swing back and forth from 90 to 45 degrees.Press
‘SWING’ again and the air louver will stop at that location.Press ‘SWING’
again and the LED will go off and the louvre will return to the 90 degree
position and the LED turns off.
TIMER FUNCTION
The appliance is fitted with a timer that will turn the unit off after the
desired time has elapsed. You can select between 1, 2, 4, 8 hours of running
time. When the selected amount of running time has expired, the unit will turn
off.
ION FUNCTION
Ionizers use electricity to create negative electrons. These electrons stream
into the airand attract oxygen molecules. At this point, they become negative
ions and are attracted to airborne particles. These molecules build up around
the particles until they become too heavy to remain air borne and fall to the
ground. Switch the Ionizer (air purifier) On or Off when desired. The LED
light will blink when turned on.
WATER FULL
When the water tank is full, an alarm will sound 10 times. The LED light on
the control panel will illuminate, and the unit will stop operating. The water
tank must be removed, emptied and reinstalled before the unit will operate
again.
ALARM
The alarmwill sound and the ALARM LED will illuminate if a malfunction is
detected. The appliance will shut down automatically if the internal
temperature is too high. Disconnect the appliance from the mains socket outlet
and wait for 15 minutes before re-connecting the appliance to the main socket
outlet and continuing with normal operation. If the alarm fault continues;
contact your authorised service agent immediately for further advice.
EMPTYING THE WATER TANK
When the water container is full, an alarmwill sound (BEEP) ten times and the
WATER FULL L.E.D will flash. The appliance will stop dehumidifying. DO NOT
move the appliance while the tank is full as this may lead to water spillage
and create a potential hazard. To remove the water tank, grip the tank firmly
and pull outwards. Any spillage should be dried immediately to avoid a
potential hazard.
WATER DRAINAGE
If desired, it is possible to connect a drainage tube (not supplied) to the
appliance for permanent water drainage. If this option is desired you will
need to purchase a suitable tube from your local hardware retailer (Goldair
does not hold tubes as spare parts).
Connect the drainage hose to the drain spout and ensure that the end of the hose is lower than the drain opening, otherwise the water will not drain and flooding may occur. Also ensure the water tank is in position (in the unit) otherwise the continuous drainage will not operate. Place the end of the drainage hose in a drainage outlet. When you no longer wish to use the permanent water drainage, disconnect the drainage tube from the device. Ensure that the water container is positioned correctly.
STORAGE
To store the unit, remove the plug from the socket and empty the container.
Allow the container and the appliance to dry completely. Clean the air filter.
Store the device in a dust-free location, preferably covered with a sheet of
plastic.
Please note: This appliance is rated to extract 8L per day in an environment
of 80%humidity and temperature of 30°C. This is the worldwide standard for
rating dehumidifiers. In New Zealand we do not have climatic conditions with
this humidity and high temperature. Accordingly, the extraction levels may
vary.
SAFETY DEVICES
This appliance has two protection devices:
- Resettable Thermal Link – this will automatically disconnect the power to the appliance at a pre-set overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate what is causing the appliance to overheat.
- Thermal Fuse – this disconnects the appliance permanently in case of overheating. (It is non-resettable).
CARE AND CLEANING
- The dehumidifier requires regular cleaning to ensure trouble-free operation:
- Unplug the dehumidifier from the mains supply before cleaning.
- Ensure that the dehumidifier has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Use a damp cloth (not wet) to wipe the exterior of the dehumidifier to remove dust and dirt.
- Never use solutions such as petrol, thinners or polishing agents.
- Ensure the dehumidifier is dry before plugging back into the mains supply.
Do not attempt to dismantle the appliance. There are no user serviceable parts. For service or repair, contact an authorised electrical service technician.
TO CLEAN THE AIR FILTER :
Switch the unit off and unplug the appliance from the mains supply. Remove the
filter. Clean the filter with a vacuum cleaner to remove dust or if it is
exceptionally dirty, wash it with warm water and a mild detergent. Ensure the
filter is completely dry before placing back in the unit. Never use unit
without the air filter.
Trouble Shooting your Dehumidifier
Problem | Cause | Solution |
---|---|---|
The Dehumidifier will not turn on | The power is not connected | Insert plug |
into mains power supply and turn unit on
The Dehumidifier is not extracting water
| The water tank is full| Remove the water tank and
empty water
The water tank is not in its
correct position
| Remove water tank and
replace it correct position
The air filter i s clogged| Clean the air filter as per
instructions in user manual
The temperature or relative humidity in the room is too low
| It i s normal for the
Dehumidifier not to operate in low humidity or low
temperatures
The Dehumidifier operates, but reduces the relative
humidity in the room by small amounts
| The room which the
Dehumidifier is operating in
i s too large
| Recommend using a
Dehumidifier with a larger
capacity
There are too many sources
of humidity
| Recommend using a
Dehumidifier with a larger capacity
The room has too much
ventilation
| Reduce the number of
ventilation sources (i .e. close
windows, doors, etc.
TECHNICAL SPECIFICATION
- Model : GD350
- Supply: 220-240VAC 50Hz
- Wattage: 650W
- Unit Capacity: 8L/day max (20°C/60%RH) Tank Capacity: 2.0L
Two Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of two years. In non-domestic use Goldair limits the voluntary warranty to
three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period. This
warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates.In Australia, our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if th e goods fail to be of acceptable quality and the
failure does not amount to a major failure.In New Zealand this warranty is
additional to the conditions and guarantees of the Consumers Guarantee Act
(1993).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>