PHILIPS BDP101 LED60 Pole Light Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BDP101 LED60 Pole Light
Important Information
TOWNGUIDE PERF BOWL, LED module 6000 lm, Distribution symmetrical, Polycarbonate bowl/cover frosted
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy reduction programs. This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
Lamp family code| LED60 [LED module 6000 lm]
Light source replaceable| Yes
Number of gear units| 1 unit
Driver included| Yes
Photocell| –
Light source engine type| LED
Service tag| Yes
Product family code| BDP101 [TOWNGUIDE PERF BOWL]
Lighting Technology| LED
Value ladder| Performance
Embedded control| Constant light output and DynaDimmer fixed presets version 2
Serviceability class| Class A, luminaire is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts.
Light Technical
Upward light output ratio| 15
Luminous Flux| 2,300 lm
Standard tilt angle posttop| 0°
Standard tilt angle side entry| –
Luminous Efficacy (rated) (Nom)| 62 lm/W
Correlated Color Temperature (Nom)| 3000 K
Color rendering index (CRI)| 80
Number of light sources| 8
Light source color| 830 warm white
Optical cover type| Polycarbonate bowl/cover frosted
Luminaire light beam spread| 75°
Optic type outdoor| Distribution symmetrical
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 to 60 Hz
Initial CLO power consumption| 37 W
Average CLO power consumption| 38.5 W
End CLO power consumption| 40 W
Inrush current| 45 A
Inrush time| 0.285 ms
Power Consumption| 40 W
Power Factor (Fraction)| 0.95
Connection| Screw connection block 5-pole
Cable| –
Number of products on MCB of 16 A type B| 10
Temperature
Ambient temperature range| -40 to +35 °C
Controls and Dimming
Dimmable| Yes
Driver/power unit/transformer| Power supply unit with DynaDimmer and constant
light output (integrated)
Control interface| Programmable (via DALI or NFC) standalone dimming
Constant light output| Yes
Mechanical and Housing
Housing Material| Aluminum
Reflector material| –
Optic material| Acrylate
Optical cover material| Polycarbonate
Fixation material| Steel
Housing Color| Silver
Mounting device| Post-top for diameter 62 mm
Optical cover shape| Hemispherical
Optical cover finish| Frosted
Overall length| 570 mm
Overall width| 570 mm
Overall height| 293 mm
Overall diameter| 570 mm
Effective projected area| 0.095 m²
Dimensions (Height x Width x Depth)| 293 x 570 x 570 mm
Parts color| All parts colored
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jetproof]
Mech. impact protection code| IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV
differential mode and 6 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class II
CE mark| Yes
Warranty period| 5 years
Flammability mark| –
ENEC mark| ENEC mark
Glow-wire test| Temperature 650 °C, duration 5 s
EU RoHS compliant| Yes
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.43, 0.40) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)
Driver failure rate at 5000 h| 0.5 %
Control gear failure rate at median useful life 100000 h| 10 %
Lumen maintenance at median useful life* 100000 h| 94
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| 50%
Product Data
Order product name| BDP101 LED60/830 II DS PCF SI CLODDF2 6
Full product name| BDP101 LED60/830 II DS PCF SI CLODDF2 6
Full product code| 871829190614800
Order code| 910500991015
Material Nr. (12NC)| 910500991015
Net Weight (Piece)| 6.830 kg
EAN/UPC – Product/Case| 8718291906148
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8718291906148
Customer Support
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, April 23 – data subject to change