CMA Dishmachines H-1X Drain Water Tempering Kit Installation Guide
- September 2, 2024
- CMA Dishmachines
Table of Contents
CMA Dishmachines H-1X Drain Water Tempering Kit
Installation Instructions
-
Machine ships with wye fitting and CMA Drain Water Tempering valve installed.
-
Remove black plug.
-
DWT with black plug installed
-
Remove black plug
-
Connect cold water line to the in-line check valve. Installer responsible for water connection. Cold water connections not supplied by CMA Dishmachines.
-
Turn on cold water and check for leaks.
Installation & Operation
-
Installer must attach the Drain Water Tempering kit to the end of the dish machine drain line as shown below.
-
Remove black plug and attach cold water line. Drain Water Tempering assembly must be no higher than 12″ from the floor.
Parts
| ITEM NO | NO. REQ’D | P/N | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 13470.86 | DTV “Y” fitting |
| 2 | 1 | 13470.8 | Drain Water Tempering Valve |
| 3 | 1 | 00742.00 | Nipple Brass 1/2 x 1 1/2 |
| 4 | 1 | 00715.00 | 1/2 Ball Check Valve |
| 5 | 1 | 13472.40 | Adapter PVC 1/2 Male x 1/2 Barb |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>