DOMO DO7288S Robot Vacuum Cleaner Instructions
- June 3, 2024
- DOMO
Table of Contents
DOMO DO7288S Robot Vacuum Cleaner
WARRANTY
Dear client ,
All of our products are always submitted to a strict quality control before
they are sold to you. Should you nevertheless experience problems with your
device, we sincerely regret this.
In that case, we kindly request you to contact our customer service. Our staff
will gladly assist you.
- +32 14 21 71 91
- info@linea2000.be
- Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00 Friday: 8.30 – 12.00 and 13.00 – 16.30
This appliance has a two year warranty period. During this period the
manufacturer is responsible for any failures that are the direct result of
construction failure. When these failures occur the appliance will be repaired
or replaced if necessary. The warranty will not be valid when the damage to
the appliance is caused by wrong use, not following the instructions or
repairs executed by a third party. The guarantee is issued with the original
till receipt. All parts, which are subject to wear, are excluded from the
warranty.
If your device breaks down within the 2-year warranty period, you can return
the device together with your receipt to the shop where you purchased it.
The guarantee on accessories and components that are liable to wear-and-tear
is only 6 months.
The guarantee and responsibility of the supplier and manufacturer lapse
automatically in the following cases:
- If the instructions in this manual have not been followed.
- In case of incorrect connection, e.g., electrical voltage that is too high.
- In case of incorrect, rough or abnormal use.
- In case of insufficient or incorrect maintenance.
- In case of repairs or alterations to the device by the consumer or non-authorised third parties.
- If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer.
SAFETY INSTRUCTIONS
- Read all instructions before use.
- This appliance may be used by children from the age of 16 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.
- Children cannot be allowed to play with the appliance.
- Maintenance and cleaning of the appliance may not be done by children, unless they are older than 16 years old and are under supervision.
- Keep the appliance out of reach of children younger than 16 years old.
- This appliance is suitable to be used in a household environment and in similar surroundings such as:
- Kitchen for personnel of shops, offices or other similar professional surroundings
- Farms
- Hotel or motel rooms and other surroundings with a residential character
- Guest rooms or similar
- Attention: This appliance cannot be used with an external timer or a separate remote control.
- Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net at your home.
- Always connect the appliance to an earthed socket.
- Do not let the cord hang on a hot surface or on the edge of a table or counter top.
- Never use the appliance when the cord or plug is damaged, after malfunction or when the appliance itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up and repair.
- Close supervision is necessary when the appliance is used near or by children.
- The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock or injuries.
- Do not leave a working appliance unattended.
- Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.
- Do not use the appliance outdoors.
- Only use the appliance for its intended use.
- Always use the appliance on a steady, dry and level surface.
- Only use the appliance for domestic use. The manufacturer can not be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.
- All repairs should be carried out by the manufacturer or its aftersales service.
- Never immerse the appliance, the cord or the plug in water or any other liquid.
- Make sure that children do not touch the cord or appliance.
- Keep the cord away from sharp edges and hot parts or other heat sources.
- Before use, remove all packaging materials and any promotional stickers.
- To prevent the risk of electrocution, do not use the vacuum cleaner outdoors or on wet surfaces.
- Only use the vacuum cleaner as described in this instruction booklet.
- Do not pull the cord. Do not use the cord as a handle. Do not jam the cord between a door or do not pull it around corners or sharp edges. Do not run the vacuum cleaner over the cord. Keep the cord away from hot surfaces.
- Do not touch the plug or the vacuum cleaner when you have wet hands.
- Do not put any objects in the openings of the vacuum cleaner. Do not use the appliance when an opening is blocked.
- Keep hair, loose clothing, fingers and other body parts away from openings of the vacuum cleaner and from moving parts.
- Never use the vacuum cleaner to pick up any combustible or inflammable liquids like gasoline, or do not use the appliance in places where such substances might be present.
- Remove large and sharp objects from the floor before vacuuming it to prevent possible damage.
- Do not pick up any burning or smoking objects, like cigarettes, matches or hot ashes.
- Do not use the vacuum cleaner without dust bag and/or filter.
- Save these instructions
PARTS
- Appliance
- Charging station
- Remote control
- Adapter
- Cleaning brush
- Side brushes
- HEPA filter
Top:
- Infrared receiver
- Bumper
- Touch screen button on/off
- Button for opening the dust bin
- On/Off switch
Bottom:
- Button cell battery for internal clock
- Side brushes
- UV light
- Suction
- Battery compartment
- Contact for charging battery
Dust bin
- Primary filter
- HEPA filter holder
- HEPA filter
- Dust bin
Charging station
- Infrared receiver
- Indicator light
- Infrared transmitter
- DC input
- Contact for charging battery
BEFORE THE FIRST USE
- Put two AAA batteries in the remote control. Set the time (see “use with remote control/CLK: clock”)
- Prior to initial use, charge the robot vacuum cleaner for 12 hours.
- Place the signed brushes on the vacuum cleaner. Press on them until you hear a click. The brushes and the machine are marked with L (left) and R (right); make sure they match.
INSTALLING THE CHARGING STATION
- Place the charging station on a smooth hard surface, e. g. tiles, parquet, short-haired sturdy carpet, against a wall or cupboard.
- Make sure that there is an area of at least 1 m free on the left and right sides of the charging station. In front of the charging station, there must be a free area of 2 m (Fig. 1). If this is not the case, it is possible that the vacuum cleaner cannot find the charger when it must charge.
- Take the adapter, put the plug in the outlet and put the DC plug into the charging station (Fig. 2).
IMPORTANT: always make sure that no cables are in front of or next to the
charging station; these could get caught between the wheels or brushes of the
vacuum cleaner.
USE
Turn the machine on with the on switch on the side of the appliance prior to use or charging.
STANDBY/SLEEP MODE/OFF
Standby
The machine is in standby mode when the on switch is on and the machine is in
idle state, ready to be used immediately.
Sleep mode
When the machine is in sleep mode, you must first activate it before you can
start the machine. This is done by pressing the on/off touchscreen button on
the machine or with the ON/OFF button on the remote control. The machine
automatically goes into sleep mode after being in standby mode for 15 minutes.
You can also turn on the mode yourself by pressing and holding the on/off
touchscreen button on the machine for 3 seconds.
Off
You can turn off the machine completely by switching off the on switch on the
side of the device while in standby mode.
The machine turns itself off after being in sleep mode for 15 minutes if no
timer has been set.
USE WITHOUT REMOTE CONTROL
Press on the on/off touchscreen button for automatic cleaning. The vacuum
cleaner will plot its own path to vacuum the entire area, taking walls,
obstacles and stairs into account.
When the machine is finished vacuuming, it will automatically return to the
charging station. It is also possible to allow the machine itself to stop
cleaning. To do so, touch the on/off touchscreen button. Turn the device off
with the on switch on the side of the machine.
USE WITH REMOTE CONTROL
Important: when adjusting settings with the remote control, you must aim it at
the machine.
- PLAN: setting the timer
- HOME: return to the charging station for re-charging
- ON/OFF: on-off button
- MODE: select cleaning programme
- CLK: clock
- SPOT: local cleaning
PLAN: timer
This button allows you to set the timer (at least 30 minutes, at most 23
hours). Vacuuming will begin automatically when the time set has expired.
For example: It is now 9 AM. You set the timer for 6:30. The vacuum cleaner
will begin after 6 hours and 30 minutes, that is, at 3:30 PM.
- Press and hold the PLAN button for 5 seconds.
- The hours on the display will begin to flash. Set the hours by pressing the arrows up and down. Press the arrow to the right to confirm.
- The minutes on the display will begin to flash. Set the minutes by pressing the arrows up and down. The minutes can be set at :00 or :30. Press the arrow to the right to confirm.
- Press the ON/OFF button to save the setting.
- You will hear a confirmation: “scheduling confirmed”.
The timer is a daily recurring setting. As explained in the example, the
vacuum cleaner will begin vacuuming every day at 3:30 PM. The timer can be
turned off by resetting it, setting the time at 00:00. You will hear a
confirmation: “no scheduling”.
Note: if the vacuum cleaner is turned off with the on switch, the machine will
not vacuum at the time set. When turning it on again with the switch, the
timer must be reset.
Note: this setting can only be programmed in standby mode or while the machine
is charging.
HOME: return to the charging station for re-charging
- If you wish to charge the vacuum cleaner during use, press the HOME button. The vacuum cleaner will now automatically look for the charging station.
- PLEASE NOTE: it is possible that the vacuum cleaner cannot find the charging station because there are too many obstacles around the charging station. Make sure that the free area around the charging station is as large as possible.
- If the battery is empty, the vacuum cleaner will automatically return to the charging station. The indicator light on the machine will light up red.
ON/OFF: on-off button
Press on the on-off button for automatic cleaning. The vacuum cleaner will
plot its own path to vacuum the entire area, taking walls, obstacles and
stairs into account.
MODE: select cleaning programme
While vacuuming, you can select from 4 different cleaning programs. First, use
the ON/OFF button to start the vacuum cleaner in automatic cleaning mode.
Press the MODE button.
Make sure the remote control is aimed at the machine. If the mode has been
changed, you will hear a short signal.
The mode selected can be read on the display:
-
MODE 1: spiral
The vacuum cleaner will move in a spiral formation. -
MODE 2: automatic
The vacuum cleaner will plot its own path to vacuum the entire area, taking walls, obstacles and stairs into account. -
MODE 3: corners
The vacuum cleaner will go along the walls and clean the corners as well. -
MODE 4: Zigzag
The vacuum cleaner will make a zigzag movement to vacuum the area. The vacuum cleaner will automatically apply this function if a large open area without obstacles is detected.
CLK: clock
This button allows you to set the time and day.
- Press and hold the CLK button for 5 seconds.
- The hours on the display will begin to flash. Set the hours by pressing the arrows up and down. Press the arrow to the right to confirm.
- The minutes on the display will begin to flash. Set the minutes by pressing the arrows up and down. Press the arrow to the right to confirm.
- The day on the display will begin to flash. Set the day by pressing the arrows up and down. Press the CLK button to confirm. The display will show the following abbreviations:
- SUN: Sunday
- MON: Monday
- TUE: Tuesday
- WED: Wednesday
- THU: Thursday
- FRI: Friday
- SAT: Saturday
SPOT: local cleaning
- During the automatic program, it is possible to push the SPOT button to clean dirtier areas. The robot vacuum cleaner will clean that area intensively.
- After +/- 90 seconds, the vacuum cleaner will automatically stop SPOT cleaning. It can also be stopped by pressing the SPOT button once again.
- The machine is equipped with automatic detection for dirtier areas. If the vacuum cleaner passes over such areas, the SPOT function will be applied automatically.
- The vacuum cleaner will move in a pattern that is similar to the spiral mode and will also vacuum more powerfully.
ANTI-FALL SYSTEM
- The robot vacuum cleaner is equipped with an anti-fall detection. The machine will detect stairs or drops, preventing it from falling.
- Nevertheless, it is recommended that you exercise caution and restricted the vacuum cleaner from the area with stairs.
CHARGING
- When the vacuum cleaner’s battery is empty, the blue indicator light on the vacuum cleaner will turn red. The machine will automatically return to the charging station to charge.
- It is also possible to send the machine to recharge by pressing the HOME button on the remote control.
- When the machine makes contact with the charging station, you will hear a confirmation: “start charging”.
- While charging:
- The indicator light is blue: the machine is fully charged.
- The indicator light is red and flashing: the on switch must be on for it to charge.
- The indicator light is flashing red and blue: the machine is charging.
CLEANING AND MAINTENANCE
CLEANING DUST COLLECTION COMPARTMENTS AND FILTERS
Clean the dust collection compartment and the filters after each use in the
following manner:
- Press the PUSH button to open the dust collection compartment.
- Remove the dust collection compartment from the machine.
- Remove the HEPA filter, including holder, from the dust collection compartment.
- Open the dust collection compartment and remove the primary filter.
- Empty the dust collection compartment above the dustbin.
- Rinse the dust collection compartment and the primary filter under running water. Allow these to dry before replacing them. Clean the HEPA filter with a dust brush.
- If the HEPA filter is dirty, after approximately 30 days of use, it can also be cleaned under running water. Allow it to dry for replacing it.
- After numerous uses, the filters should be replaced. The maximum duration of the filters is approximately 24 months.
- Replace both filters in the dust collection compartment.
CLEANING THE MACHINE
- Clean the side brushes, wheels, sensors and the contacts for charging the battery regularly with a soft cloth.
- After numerous uses, the side brushes should be replaced. The maximum duration of the brushes is approximately 12 months. The brushes and the machine are marked with L (left) and R (right); make sure they match.
- Never submerge the machine in water!
- The sensors may not become wet.
ENVIRONMENTAL GUIDELINES
This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>